WAGO 750-513 relay output module with two potential-free relay outputs capable of switching up to 250 V AC or 30 V DC at 2 A for the WAGO 750 distributed I/O system.
£64.38
The WAGO 750-513 is a reliable 2-channel relay output module designed for the WAGO I/O System 750. It allows PLCs and industrial controllers to switch higher-voltage field devices such as contactors, signalling lamps, motors and relay coils within distributed automation systems.
Each channel provides a potential-free electromechanical relay contact capable of switching loads up to 250 V AC or 30 V DC with a maximum switching current of 2 A. The relay contacts are electrically isolated from the controller electronics, allowing safe and reliable control of external loads. :contentReference
The module integrates seamlessly with WAGO fieldbus couplers and programmable controllers within the modular WAGO 750 distributed I/O architecture. Its compact DIN rail housing and CAGE CLAMP® spring terminal technology allow quick installation and secure wiring inside industrial control cabinets.
Relay output modules provide a reliable interface between PLC control logic and field devices that require higher switching voltages. By using electromechanical relay contacts, these modules safely isolate the controller electronics from external loads.
The WAGO 750-513 allows automation systems to control equipment such as contactors, signal lamps and motors while maintaining electrical isolation between the controller and the field circuit. The relay state is indicated by integrated LEDs for quick status monitoring. :contentReference
| Current | 2 A |
|---|---|
| Voltage | 250 V |
| IP Rating | IP20 |
| Series | WAGO I/O System 750 |
| Module type | Relay output module |
| Number of outputs | 2 relay outputs |
| Contact configuration | 2 make contacts (NO) |
| Switching voltage | up to 250 V AC / 30 V DC |
| Maximum switching current | 2 A |
| Minimum switching current | approx. 10 mA |
| Switching frequency | approx. 0.5 Hz at nominal load |
| Isolation | field/system isolation via relay contacts |
| System supply voltage | 5 V DC via internal I/O bus |
| Connection technology | CAGE CLAMP® spring terminals |
| Mounting | 35 mm DIN rail |
| Module width | approx. 12 mm |
| Operating temperature | 0 °C to +55 °C |
| Ingress protection | IP20 |
| HS Code | 85371098 |
| Country of Manufacture | Germany |
The module provides two relay outputs allowing PLCs and automation controllers to switch higher-voltage devices such as lamps, contactors and actuators.
The relay contacts can switch loads up to 250 V AC or 30 V DC.
Each relay output can switch loads up to approximately 2 A.
Yes. The outputs use potential-free relay contacts which provide electrical isolation between the controller electronics and the field circuit.
The module is designed for the WAGO I/O System 750 and works with WAGO fieldbus couplers and programmable controllers.
WAGO 750 Series I/O modules are widely used by automation engineers and system integrators to build reliable distributed control systems across manufacturing, infrastructure and process automation industries.
● Service Agreements
Credit Accounts
Our service agreements are built to support long term procurement relationships. By working closely with engineering teams and procurement departments, we help streamline purchasing processes while ensuring consistent access to critical components and sourcing support when it matters most.
● frequently asked questions
At Led Controls Ltd we help engineers source the right automation and control gear with confidence. below are quick answers to what we are asked most often.
We supply all leading manfacturers in our industry. we offer next day delivery on most poplour products.
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
● latest blog
LED Controls is a specialist distributor of factory automation and industrial controls, supplying OEMs, machine builders, panel builders and end users throughout the UK and worldwide. As a trusted UK distributor for many of the world’s leading automation manufacturers, we provide industrial control products, technical expertise and bespoke automation solutions backed by outstanding customer service.
2025 has been a big year for LED Controls, and our blog has expanded accordingly. We've covered a wide range of topics across industrial control and factory automation this year. From core technology explainers and new product releases to panel building best practice...
2025 has been a big year for LED Controls, and our blog has expanded accordingly. We've covered a wide range of topics across industrial control and factory automation this year. From core technology explainers and new product releases to panel building best practice...