Why Choose the Rittal RX9361.300 RiLineX Connection Adaptor?
The Rittal RX9361.300 is a high-current, single-pole RiLineX connection adaptor designed for connecting laminated copper bars to RiLineX and RiLine60 60 mm busbar systems. Its compact construction, freely selectable phase spacing and support for double bar connections make it a flexible solution for incoming power supplies and high-capacity distribution assemblies.
Engineered for laminated copper bars measuring up to 50 × 20 mm, the RX9361.300 supports a maximum IEC rated current of 1,500 A. Conductors may be routed from either the top or bottom, while two connection points support full through-wiring for straightforward onward power distribution.
The adaptor snaps directly onto the busbar platform and is secured together with the connected conductor using a single screw. Its tool-assisted removal, high short-circuit withstand capability and adaptable contact-hazard protection help create a secure and serviceable electrical installation in demanding industrial environments.
Key Advantages
- Supports high-current applications up to 1,500 A IEC.
- Designed for RiLineX and RiLine60 60 mm busbar systems.
- Suitable for double connections using laminated copper bars.
- Top or bottom cable outlet provides flexible routing.
- Two connection points permit full through-wiring.
- Busbar mounting and conductor connection are secured with one screw.
- Freely selectable phase spacing simplifies system configuration.
Key Features
- Single-pole RiLineX connection adaptor.
- Maximum rated current of 1,500 A IEC.
- Maximum UL current rating of 1,380 A.
- Suitable for laminated copper bars.
- Supports double bar connections.
- Clamping area of 50 × 20 mm.
- Top or bottom conductor entry.
- Two electrical connections.
- IP2XB finger-safe protection.
- UL and C-UL Listed.
High-Current Power Distribution with Flexible Routing
The RX9361.300 is designed for high-capacity incoming and outgoing power connections where laminated copper bars are preferred over round conductors. Its two connection points enable through-wiring, allowing electrical power to be routed onwards without requiring a separate distribution terminal.
Because each single-pole adaptor can be positioned independently, phase spacing can be selected to suit the installation. The adaptor may be used for L1, L2, L3 or neutral conductors, providing panel builders with a modular method of creating high-current connections within RiLineX assemblies.
Simple and Secure Installation
Installation is completed by snapping the adaptor onto the RiLineX board and securing the adaptor and laminated copper bar with a single screw. Conductors may enter from above or below, helping installers accommodate different enclosure layouts and cable-routing requirements.
Removal requires a tool, reducing the likelihood of accidental release. Integrated contact-hazard protection and tested short-circuit performance support safe operation in industrial switchgear and power distribution systems.
Typical Applications
- High-current incoming power connections.
- Industrial low-voltage switchboards.
- Main distribution panels.
- Machine and production-line power distribution.
- Motor control centres.
- OEM switchgear assemblies.
- RiLineX and RiLine60 system extensions.
- Laminated copper bar distribution systems.
