Finder 10.32.8.230.0000 is an IP54 wall or pole-mounted light-dependent relay with a 230 V AC supply, two 16 A normally open contacts, integrated photosensor and adjustable 1–80 lx threshold.
£64.66
The Finder 10.32.8.230.0000 is a robust and dependable light-dependent relay designed to control outdoor lighting automatically according to the ambient brightness level. As part of the Finder 10 Series, it combines an integrated photosensor, adjustable light threshold and two normally open output contacts within a weather-resistant enclosure.
The relay provides double-pole switching, allowing both the live and neutral conductors of a connected lighting circuit to be switched. Its adjustable sensitivity range of 1–80 lx enables the operating threshold to be configured for different locations, while the factory-preset threshold is 10 lx.
Designed for wall or pole mounting, the 10.32.8.230.0000 operates from a 230 V AC, 50 / 60 Hz supply and provides two normally open contacts rated at 16 A. Its IP54 enclosure, −30 to +70 °C operating range and integrated light feedback compensation support reliable exterior lighting control.
Light-dependent relays monitor natural light and operate connected lamps when the measured brightness crosses a configured threshold. The Finder 10.32 includes an integral sensor and switching delays that help prevent temporary shadows, passing headlights or other brief light changes from causing unnecessary switching.
Finder’s light feedback compensation system helps reduce the influence of the controlled lamps on the sensor reading. Double-pole operation also enables both live and neutral conductors to be switched, making the relay suitable for decentralised exterior lighting installations.
| Manufacturer | Finder |
|---|---|
| Series | 10 Series |
| Model | 10.32.8.230.0000 |
| Product type | Light-dependent relay |
| Rated supply voltage | 230 V AC |
| Supply frequency | 50 / 60 Hz |
| Operating voltage range | 184–253 V AC |
| Rated power | 2 VA |
| Contact configuration | 2NO (DPST-NO) |
| Rated contact current | 16 A |
| AC1 rated load | 3700 VA |
| AC15 rated load | 750 VA |
| AC5a rated current | 5 A |
| Incandescent / halogen lamp load | 2300 W at 230 V AC |
| CFL / LED lamp load | 500 W at 230 V AC |
| Light threshold adjustment | 1–80 lx |
| Preset light threshold | 10 lx |
| Switch-on delay | 15 s |
| Switch-off delay | 30 s |
| Electrical life at rated AC1 load | 100,000 cycles |
| Operating temperature | −30 to +70 °C |
| Protection rating | IP54 |
| Mounting type | Wall or pole mounting |
| Applicable standards | EN 60669-1 and EN 60669-2-1 |
It automatically switches outdoor lighting according to the ambient brightness measured by its integrated photosensor.
The relay operates from a 230 V AC supply at 50 / 60 Hz.
The switching threshold can be adjusted between 1 and 80 lx, with a factory-preset value of 10 lx.
It provides two normally open 16 A contacts in a DPST-NO configuration, enabling double-pole live and neutral switching.
Its IP54 enclosure is designed for wall or pole mounting in exterior lighting applications.
Finder 10 Series light-dependent relays provide electricians and lighting engineers with dependable automatic switching, adjustable sensitivity and durable outdoor installation.{ "@context": "https://schema.org/", "@type": "Product", "name": "Finder 10.32.8.230.0000 Light-Dependent Relay 230 V AC 16 A", "sku": "10.32.8.230.0000", "mpn": "10.32.8.230.0000", "brand": { "@type": "Brand", "name": "Finder" }, "category": "Light-Dependent Relays", "description": "Finder 10.32.8.230.0000 is an IP54 wall or pole-mounted light-dependent relay with a 230 V AC supply, two 16 A normally open contacts, integrated photosensor and adjustable 1–80 lx threshold.", "additionalProperty": [ { "@type": "PropertyValue", "name": "Supply voltage", "value": "230 V AC" }, { "@type": "PropertyValue", "name": "Contact configuration", "value": "2NO (DPST-NO)" }, { "@type": "PropertyValue", "name": "Rated contact current", "value": "16 A" }, { "@type": "PropertyValue", "name": "Light threshold", "value": "1–80 lx" }, { "@type": "PropertyValue", "name": "Protection rating", "value": "IP54" } ] } { "@context": "https://schema.org", "@type": "FAQPage", "inLanguage": "en-GB", "mainEntity": [ { "@type": "Question", "name": "What is the Finder 10.32.8.230.0000 used for?", "acceptedAnswer": { "@type": "Answer", "text": "It automatically switches outdoor lighting according to the ambient brightness measured by its integrated photosensor." } }, { "@type": "Question", "name": "What supply voltage does this light-dependent relay require?", "acceptedAnswer": { "@type": "Answer", "text": "The relay operates from a 230 V AC supply at 50 / 60 Hz." } }, { "@type": "Question", "name": "What is the adjustable light threshold range?", "acceptedAnswer": { "@type": "Answer", "text": "The switching threshold can be adjusted between 1 and 80 lx, with a factory-preset value of 10 lx." } }, { "@type": "Question", "name": "What output contacts does the relay provide?", "acceptedAnswer": { "@type": "Answer", "text": "It provides two normally open 16 A contacts in a DPST-NO configuration, enabling double-pole live and neutral switching." } }, { "@type": "Question", "name": "Where can the Finder 10.32 be installed?", "acceptedAnswer": { "@type": "Answer", "text": "Its IP54 enclosure is designed for wall or pole mounting in exterior lighting applications." } } ] }
● Service Agreements
Credit Accounts
Our service agreements are built to support long term procurement relationships. By working closely with engineering teams and procurement departments, we help streamline purchasing processes while ensuring consistent access to critical components and sourcing support when it matters most.
● frequently asked questions
At Led Controls Ltd we help engineers source the right automation and control gear with confidence. below are quick answers to what we are asked most often.
We supply all leading manfacturers in our industry. we offer next day delivery on most poplour products.
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
● latest blog
LED Controls is a specialist distributor of factory automation and industrial controls, supplying OEMs, machine builders, panel builders and end users throughout the UK and worldwide. As a trusted UK distributor for many of the world’s leading automation manufacturers, we provide industrial control products, technical expertise and bespoke automation solutions backed by outstanding customer service.
2025 has been a big year for LED Controls, and our blog has expanded accordingly. We've covered a wide range of topics across industrial control and factory automation this year. From core technology explainers and new product releases to panel building best practice...
2025 has been a big year for LED Controls, and our blog has expanded accordingly. We've covered a wide range of topics across industrial control and factory automation this year. From core technology explainers and new product releases to panel building best practice...