Finder 10.41.8.230.0000 is an IP54 wall or pole-mounted light-dependent relay with a 230 V AC supply, 16 A normally open contact, integrated photosensor and adjustable 1–80 lx threshold.
£48.51
The Finder 10.41.8.230.0000 is a reliable light-dependent relay designed to control exterior lighting automatically according to the ambient brightness level. As part of the Finder 10 Series, it combines an integrated photosensor, adjustable light threshold and a normally open switching contact within a durable wall or pole-mounted enclosure.
The adjustable sensitivity range of 1–80 lx enables the switching threshold to be configured for different locations and lighting requirements. An integrated status LED assists with testing and threshold adjustment, while switch-on and switch-off delays help prevent unwanted operation caused by temporary shadows or passing vehicle headlights.
The Finder 10.41.8.230.0000 operates from a 230 V AC, 50 / 60 Hz supply and provides one normally open contact rated at 16 A. Its IP54 enclosure, −30 to +70 °C operating range and light feedback compensation support dependable outdoor lighting control.
Light-dependent relays monitor natural light and operate connected lamps when the measured brightness crosses a configured threshold. The Finder 10.41 includes an integral sensor and switching delays that help prevent temporary shadows, passing headlights or other short-lived changes from causing unnecessary switching.
Finder’s light feedback compensation system helps reduce the influence of the controlled lamps on the sensor reading. This supports stable switching and prevents repeated cycling when the light produced by the connected lamps reaches the relay’s integrated photosensor.
| Manufacturer | Finder |
|---|---|
| Series | 10 Series |
| Model | 10.41.8.230.0000 |
| Product type | Light-dependent relay |
| Rated supply voltage | 230 V AC |
| Supply frequency | 50 / 60 Hz |
| Operating voltage range | 184–253 V AC |
| Rated power | 2 VA |
| Contact configuration | 1NO (SPST-NO) |
| Rated contact current | 16 A |
| AC1 rated load | 3700 VA |
| AC15 rated load | 750 VA |
| AC5a rated current | 5 A |
| Incandescent lamp load | 2000 W at 230 V AC |
| Fluorescent lamp load | 750 W at 230 V AC |
| CFL / LED lamp load | 400 W at 230 V AC |
| Light threshold adjustment | 1–80 lx |
| Preset light threshold | 10 lx |
| Switch-on delay | 15 s |
| Switch-off delay | 30 s |
| Electrical life at rated AC1 load | 100,000 cycles |
| Operating temperature | −30 to +70 °C |
| Protection rating | IP54 |
| Mounting type | Wall or pole mounting |
| Applicable standards | EN 60669-1 and EN 60669-2-1 |
It automatically switches exterior lighting according to the ambient brightness measured by its integrated photosensor.
The relay operates from a 230 V AC supply at 50 / 60 Hz.
The switching threshold can be adjusted between 1 and 80 lx, with a factory-preset value of 10 lx.
It provides one normally open contact rated at 16 A in an SPST-NO configuration.
Its IP54 enclosure is designed for wall or pole mounting in exterior lighting applications.
Finder 10 Series light-dependent relays provide electricians and lighting engineers with dependable automatic switching, adjustable sensitivity and durable outdoor installation.{ "@context": "https://schema.org/", "@type": "Product", "name": "Finder 10.41.8.230.0000 Light-Dependent Relay 230 V AC 16 A", "sku": "10.41.8.230.0000", "mpn": "10.41.8.230.0000", "brand": { "@type": "Brand", "name": "Finder" }, "category": "Light-Dependent Relays", "description": "Finder 10.41.8.230.0000 is an IP54 wall or pole-mounted light-dependent relay with a 230 V AC supply, 16 A normally open contact, integrated photosensor and adjustable 1–80 lx threshold.", "additionalProperty": [ { "@type": "PropertyValue", "name": "Supply voltage", "value": "230 V AC" }, { "@type": "PropertyValue", "name": "Contact configuration", "value": "1NO (SPST-NO)" }, { "@type": "PropertyValue", "name": "Rated contact current", "value": "16 A" }, { "@type": "PropertyValue", "name": "Light threshold", "value": "1–80 lx" }, { "@type": "PropertyValue", "name": "Protection rating", "value": "IP54" } ] } { "@context": "https://schema.org", "@type": "FAQPage", "inLanguage": "en-GB", "mainEntity": [ { "@type": "Question", "name": "What is the Finder 10.41.8.230.0000 used for?", "acceptedAnswer": { "@type": "Answer", "text": "It automatically switches exterior lighting according to the ambient brightness measured by its integrated photosensor." } }, { "@type": "Question", "name": "What supply voltage does this light-dependent relay require?", "acceptedAnswer": { "@type": "Answer", "text": "The relay operates from a 230 V AC supply at 50 / 60 Hz." } }, { "@type": "Question", "name": "What is the adjustable light threshold range?", "acceptedAnswer": { "@type": "Answer", "text": "The switching threshold can be adjusted between 1 and 80 lx, with a factory-preset value of 10 lx." } }, { "@type": "Question", "name": "What output contact does the relay provide?", "acceptedAnswer": { "@type": "Answer", "text": "It provides one normally open contact rated at 16 A in an SPST-NO configuration." } }, { "@type": "Question", "name": "Where can the Finder 10.41 be installed?", "acceptedAnswer": { "@type": "Answer", "text": "Its IP54 enclosure is designed for wall or pole mounting in exterior lighting applications." } } ] }
● Service Agreements
Credit Accounts
Our service agreements are built to support long term procurement relationships. By working closely with engineering teams and procurement departments, we help streamline purchasing processes while ensuring consistent access to critical components and sourcing support when it matters most.
● frequently asked questions
At Led Controls Ltd we help engineers source the right automation and control gear with confidence. below are quick answers to what we are asked most often.
We supply all leading manfacturers in our industry. we offer next day delivery on most poplour products.
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
● latest blog
LED Controls is a specialist distributor of factory automation and industrial controls, supplying OEMs, machine builders, panel builders and end users throughout the UK and worldwide. As a trusted UK distributor for many of the world’s leading automation manufacturers, we provide industrial control products, technical expertise and bespoke automation solutions backed by outstanding customer service.
2025 has been a big year for LED Controls, and our blog has expanded accordingly. We've covered a wide range of topics across industrial control and factory automation this year. From core technology explainers and new product releases to panel building best practice...
2025 has been a big year for LED Controls, and our blog has expanded accordingly. We've covered a wide range of topics across industrial control and factory automation this year. From core technology explainers and new product releases to panel building best practice...