Why Choose the nVent HOFFMAN DHP050 Horizontal Door Profiles?
The nVent HOFFMAN DHP050 is a set of horizontal door mounting profiles designed to provide additional attachment and installation points inside compatible wall-mounted electrical enclosures. Intended for 500 mm wide enclosures, the profiles create a practical mounting structure for accessories, cables, ducts and electrical components on the inside of the enclosure door.
Each DHP050 profile is manufactured from robust 1.5 mm galvanised steel and features a 25 mm hole pattern with 4.5 mm and 6.5 mm diameter holes. The individual profile measures approximately 25 mm high × 448 mm wide × 12 mm deep, providing useful mounting capacity while maintaining a compact installation depth.
The DHP050 profiles fit directly onto compatible nVent HOFFMAN MMDP door mounting profiles and can also be installed vertically between two horizontal profiles for additional configuration flexibility. Each pack contains five profiles with mounting accessories, providing a convenient solution for organising and securing equipment inside compatible enclosure doors.
Key Advantages
- Provides additional mounting possibilities inside enclosure doors.
- Designed for compatible 500 mm wide enclosures.
- Robust 1.5 mm galvanised-steel construction.
- 25 mm hole pattern provides flexible equipment positioning.
- Includes both 4.5 mm and 6.5 mm diameter mounting holes.
- Fits directly onto compatible MMDP door mounting profiles.
- Can also be mounted vertically between two horizontal profiles.
- Supplied as a pack of five profiles with mounting accessories.
Key Features
- nVent HOFFMAN DHP Series horizontal door profiles.
- Suitable for 500 mm enclosure width.
- 448 mm actual profile width.
- 25 mm profile height.
- 12 mm profile depth.
- Manufactured from 1.5 mm galvanised steel.
- 25 mm mounting-hole pitch.
- 4.5 mm and 6.5 mm diameter mounting holes.
- Designed for attaching accessories and electrical equipment.
- Suitable for supporting cables and cable ducts.
- Direct mounting onto compatible MMDP profiles.
- Alternative vertical installation possible between two horizontal profiles.
- Mounting accessories included.
- Five profiles per pack.
Flexible Door-Mounted Equipment Installation
Door mounting profiles allow electrical enclosure doors to become useful installation surfaces rather than simply access panels. The nVent HOFFMAN DHP050 provides a structured 25 mm mounting pattern for attaching compatible accessories, wiring supports, cable ducts and lightweight electrical components, helping panel builders make more efficient use of available enclosure space.
The profiles are designed to fit directly onto MMDP vertical door mounting profiles. They may also be installed vertically between two horizontal profiles where the application requires a different mounting arrangement. On doors equipped with an espagnolette locking system, the profiles must be cut at the indicated position to provide the necessary clearance for the locking mechanism.
Typical Applications
- Electrical enclosure door accessory mounting.
- Control panel component installation.
- Cable and wiring support inside enclosure doors.
- Cable duct mounting and organisation.
- Industrial automation enclosures.
- Machine control panels.
- Electrical distribution enclosures.
- Retrofitting additional mounting points to compatible nVent HOFFMAN enclosure doors.
