Why Choose the nVent HOFFMAN SCO_PUNCH_L_GP3 Hole Punching Service?
The nVent HOFFMAN SCO_PUNCH_L_GP3 is a configurable enclosure machining service for producing holes from 6.1–10 mm in compatible 316 stainless steel enclosure material. Originating from the Eldon enclosure customisation programme now associated with nVent HOFFMAN, the service enables accurately specified holes to be incorporated as part of a customised enclosure configuration.
SCO_PUNCH_L_GP3 is specifically identified for 6.1–10 mm hole sizes and 316 stainless steel. It forms part of a wider range of machining operations covering different hole sizes, materials and cut-out requirements, allowing an enclosure to be prepared for the equipment that will be installed in it.
Using a specified machining service can reduce the amount of enclosure modification required during panel assembly. Correctly positioned holes can be incorporated for compatible components, mounting hardware and other installation requirements according to the enclosure project's approved machining specification.
Key Advantages
- Specified for enclosure holes between 6.1 and 10 mm.
- Designated for machining 316 stainless steel material.
- Supports customised enclosure preparation before component installation.
- Useful for projects requiring repeatable hole locations and dimensions.
- Can reduce manual drilling operations during subsequent panel assembly.
- Forms part of the established enclosure customisation and machining programme.
- Suitable for incorporating specified holes into compatible customised enclosure configurations.
Key Features
- nVent HOFFMAN / Eldon SCO_PUNCH_L_GP3 machining reference.
- Machining operation: hole punching.
- Hole-size range: 6.1–10 mm.
- Material group: 316 stainless steel.
- Intended for customised enclosure machining requirements.
- Part of a range of SCO machining and modification operations.
- Specified as a service/configuration operation rather than a conventional enclosure accessory.
Practical Custom Machining for 316 Stainless Steel Enclosures
Custom machining allows an enclosure to be prepared around the requirements of its intended electrical assembly. The SCO_PUNCH_L_GP3 operation provides a defined solution where a 6.1–10 mm hole is required in compatible 316 stainless steel material, helping integrate machining requirements into the enclosure configuration.
This service is particularly useful where multiple enclosures require the same specified modification or where machining needs to be completed before equipment reaches the panel-building stage. Final hole dimensions, positions and quantities should be defined by the applicable enclosure design and machining documentation.
Typical Applications
- Customised electrical enclosure manufacturing.
- 316 stainless steel enclosure machining.
- Control panel preparation.
- Industrial automation enclosure projects.
- Holes for compatible mounting and installation hardware.
- Repeat-production enclosure configurations.
- Pre-machined panel and enclosure assemblies.
