Why Choose the Rittal SR2332.235 Large Swing Frame with Trim Panel?
The Rittal SR2332.235 is a robust large swing frame with trim panel designed for mounting 482.6 mm (19") equipment within compatible Rittal TS and VX SE floor-standing enclosures. Part of the Rittal SR swing frame range, it provides 31 U of usable installation space and a side-mounted equipment level for accessible installation of electrical, electronic, network and automation equipment.
Manufactured from sheet steel, the swing frame features a zinc-plated frame combined with a spray-finished trim panel in RAL 7035. Its torsionally rigid construction uses welded rectangular tubing and a triple-folded support section, providing the mechanical stability required for demanding industrial equipment installations.
Designed for 800 mm wide enclosures with a minimum enclosure height of 1600 mm, the SR2332.235 provides 31 U of 19-inch mounting capacity. Depending on the selected installation kit, the swing frame can provide a 130° or 180° opening angle and supports loads up to 1500 N when standard hinges are used.
Key Advantages
- Provides 31 U of 482.6 mm (19") equipment mounting capacity.
- Designed for compatible 800 mm wide Rittal TS and VX SE enclosures.
- Robust torsionally rigid sheet steel construction.
- Supports loads up to 1500 N with standard hinges.
- Allows a 130° or 180° opening angle depending on the selected installation kit.
- Integrated trim panel and locking system provide a complete professional installation.
Key Features
- Rittal SR large swing frame.
- 31 U mounting capacity.
- 482.6 mm (19") side mounting level.
- For 800 mm wide enclosures.
- Suitable for enclosure heights from 1600 mm.
- Sheet steel construction.
- Frame supplied with a zinc-plated surface.
- Trim panel spray-finished in RAL 7035.
- Includes locking rod system with double-bit lock insert.
- Equipment mounting depth can be adjusted on a 25 mm pitch pattern.
Accessible 19-Inch Equipment Mounting for Industrial Enclosures
Swing frames provide an accessible mounting platform for 482.6 mm (19") equipment installed inside industrial enclosures. By allowing the complete equipment mounting level to swing away from its operating position, technicians can gain easier access to rear connections, cabling and components during installation, commissioning and maintenance.
The Rittal SR2332.235 combines a torsionally rigid frame with adjustable installation depth and 31 U of usable mounting capacity. The frame may be installed deeper on a 25 mm pitch pattern, while left- or right-hand positioning can be selected according to equipment installation depth. Depending on the installation arrangement, compatible TS punched sections with mounting flanges may also be required.
Typical Applications
- 482.6 mm (19") industrial electronic equipment.
- Network and communications equipment.
- Industrial automation and PLC systems.
- Electrical control and monitoring equipment.
- Data acquisition and instrumentation systems.
- Rittal TS and VX SE floor-standing enclosure installations.
