Why Choose the WAGO 2006-1201 TOPJOB S 2-Conductor Through Terminal Block?
The WAGO 2006-1201 is a professional 2-conductor through terminal block from the TOPJOB® S 2006 Series, designed for reliable conductor connection in industrial control panels, machinery and building installations. Featuring WAGO's Push-in CAGE CLAMP® connection technology, it combines fast wiring with a secure spring-pressure connection and is specifically suitable for designated Ex e II applications.
With a nominal cross-section of 6 mm², the 2006-1201 accepts copper conductors from 0.5 to 10 mm². Suitable solid conductors can be inserted directly into the clamping point, while the spring connection accommodates a broad range of conductor types. Front-entry wiring, two connection points and one electrical potential provide straightforward through-wiring in compact DIN rail assemblies.
The grey terminal measures approximately 7.5 × 57.4 × 39.5 mm and mounts on standard 35 × 7.5 mm or 35 × 15 mm DIN rails. It also provides side and centre marking positions, two jumper slots and Ex e II ratings of 550 V and 38 A, making it a versatile solution for industrial and hazardous-area terminal installations where the applicable approvals and installation requirements are observed.
Key Advantages
- 6 mm² nominal cross-section for industrial power and control wiring.
- Accepts copper conductors from 0.5 to 10 mm².
- Push-in CAGE CLAMP® technology provides fast, secure spring-pressure termination.
- Suitable solid and ferruled conductors can be connected using direct push-in termination.
- Designed for specified Ex e II applications.
- 2-conductor, single-level through-terminal design simplifies point-to-point wiring.
- Side and centre marking positions support clear circuit identification.
- Compatible with standard 35 × 7.5 mm and 35 × 15 mm DIN rails.
Key Features
- WAGO TOPJOB S 2006 Series.
- 2-conductor through terminal block.
- Push-in CAGE CLAMP® connection technology.
- 6 mm² nominal cross-section.
- Suitable for specified Ex e II applications.
- 2 connection points.
- 1 electrical potential.
- 1 level.
- 2 jumper slots.
- Front-entry wiring.
- Copper conductor compatibility.
- Conductor range of 0.5 to 10 mm².
- Solid conductor push-in range of 1 to 10 mm².
- 13 to 15 mm stripping length.
- Side and centre marking capability.
- Grey PA66 polyamide housing.
- UL 94 V-0 flammability classification.
Fast, Reliable Through-Wiring with Push-in CAGE CLAMP®
WAGO Push-in CAGE CLAMP® technology combines the benefits of spring-pressure connection with direct conductor insertion. Suitable solid conductors and fine-stranded conductors fitted with appropriate ferrules can be pushed directly into the clamping point, helping reduce installation time, while an operating tool allows the clamp to be opened for other conductor types and conductor removal.
The 2006-1201 provides two connection points on a single potential for straightforward feed-through wiring. Its 7.5 mm width, two jumper slots and side and centre marking positions make it easy to incorporate into organised terminal rows, while its specified Ex e II suitability supports use in applicable hazardous-area installations when installed in accordance with the relevant certification and system requirements.
Typical Applications
- Industrial control panel through-wiring.
- Machine building and OEM electrical systems.
- Automation and process control cabinets.
- Power distribution and switchgear assemblies.
- Building electrical installations.
- Specified Ex e II hazardous-area terminal assemblies.
