Why Choose the Pizzato ST DD610M0.1-E1T ST D Series Safety Sensor?
The Pizzato ST DD610M0.1-E1T is an industrial RFID non-contact safety sensor designed for reliable monitoring of guards, doors and protective devices on automated machinery. Part of the Pizzato ST D series, it combines coded RFID actuator detection with redundant electronic safety outputs to provide dependable machine guard monitoring without mechanical contact between the sensor and actuator.
This configuration is supplied with an E1T large high-level coded RFID actuator with a rated operating distance of 20 mm. High-level coding means the sensor recognises its specifically associated actuator, providing increased protection against manipulation in accordance with EN ISO 14119. The larger E1T actuator and extended operating distance provide additional mounting tolerance compared with the standard D-series actuator.
The ST DD610M0.1-E1T operates from a 24 V DC supply and provides two safety outputs (OS1 and OS2) plus one inverted signalling output (O3). The M0.1 configuration features a short 0.1 m cable with an M12 connector, with the connection output on the right side. Its robust technopolymer housing, IP67 and IP69K protection and non-contact operating principle make it well suited to demanding industrial safety applications.
Key Advantages
- Non-contact RFID safety sensor for industrial machine guarding.
- E1T large high-level coded actuator provides enhanced resistance to manipulation.
- 20 mm rated operating distance provides increased installation tolerance.
- Two redundant safety outputs support integration into machine safety systems.
- Inverted O3 signalling output provides additional status information for external control systems.
- 0.1 m cable with M12 connector supports convenient installation and replacement.
- IP67 and IP69K protection supports operation in demanding industrial environments.
- Non-contact operation minimises mechanical wear and maintenance requirements.
Key Features
- Pizzato ST D series RFID safety sensor.
- RFID coded non-contact switching technology.
- 24 V DC supply voltage.
- 2 safety outputs (OS1, OS2).
- 1 inverted signalling output (O3).
- E1T large high-level coded RFID actuator.
- 20 mm rated operating distance.
- 23 mm rated release distance.
- 0.1 m cable with M12 connector.
- Right-side output direction.
- IP67 / IP69K environmental protection.
- 125 kHz RFID transponder frequency.
- Four LEDs provide operating and status indication.
- Supports safety performance up to PL e, Category 4 and SIL 3 when correctly integrated.
High-Coded RFID Safety Monitoring with Extended Actuation Distance
RFID safety sensors such as the Pizzato ST D series monitor movable machine guards without requiring physical contact between the sensor and actuator. The E1T version uses a large high-level coded actuator with a rated operating distance of 20 mm. When its associated actuator enters the sensor's operating range, the RFID identity is detected electronically, allowing the safety system to verify the position of the protective guard before hazardous machine functions are permitted.
The ST DD610M0.1-E1T provides two redundant safety outputs together with an inverted O3 signalling output. This inverted signalling configuration can assist an external PLC in monitoring the sensor's electrical connection and operating state. Combined with high-level RFID coding, an extended actuator operating distance and convenient M12 connectivity, the sensor provides a robust solution for industrial guard monitoring.
Typical Applications
- Machine guard and safety door monitoring.
- Automated production and assembly machinery.
- Robotic cells and automated manufacturing systems.
- Packaging and processing machinery.
- Machine tools and machining centres.
- Conveyors and material handling systems.
- Applications requiring increased sensor-to-actuator operating distance.
- Applications requiring high-coded guard monitoring.
- OEM machinery and industrial automation systems.
