Why Choose the Pizzato ST GD210N10-G1T Safety Sensor?
The Pizzato ST GD210N10-G1T is a compact RFID non-contact safety sensor with actuator designed for monitoring movable guards, doors and access points on industrial machinery. As part of the Pizzato ST G RFID safety sensor series, it combines coded RFID detection with electronic safety outputs to provide reliable guard-position monitoring without mechanical contact between the sensor and actuator.
The ST G series is designed for modern machine safety applications where dependable non-contact operation, compact installation and straightforward integration with safety control systems are required. Its redundant electronic safety outputs allow the guard state to be monitored by compatible safety modules and safety PLCs, while a dedicated signalling output can provide additional status information to the machine control system.
The ST GD210N10-G1T operates from a 24 V DC supply and uses the G1T high-level coded RFID actuator. The N10 configuration provides a 10 m integrated cable for direct wiring into machinery and control panels, making it particularly useful where a remote junction point or longer cable run is required.
Key Advantages
- Compact RFID non-contact safety sensor for industrial machine guarding.
- High-level coded G1T RFID actuator provides enhanced protection against inappropriate actuator substitution.
- Two electronic safety outputs for integration with compatible safety controllers.
- Dedicated signalling output supports machine status monitoring and diagnostics.
- 10 m integrated cable enables direct wiring over longer installation distances.
- Non-contact RFID operation reduces mechanical wear compared with conventional interlock switches.
- IP67 / IP69K protection supports installation in demanding industrial environments.
Key Features
- Pizzato ST G series RFID safety sensor.
- 24 V DC operating supply.
- 2 electronic safety outputs OS1–OS2.
- 1 O3 signalling output.
- High-level coded RFID actuator.
- G1T actuator configuration.
- 10 m integrated cable connection.
- Compact symmetrical sensor housing for flexible guard installation.
- Non-contact operation for reduced mechanical wear.
- Multicolour status indication for operating diagnostics.
- Operating temperature range of -25 °C to +70 °C.
- IP67 / IP69K environmental protection.
Reliable RFID Guard Monitoring for Industrial Automation
RFID safety sensors such as the Pizzato ST GD210N10-G1T monitor movable machine guards without requiring physical contact between the sensor and actuator. When the associated coded actuator enters the detection zone, the sensor verifies the RFID code and changes the state of its electronic safety outputs, allowing the connected safety controller to confirm that the protected guard is correctly positioned.
The high-level coded G1T actuator provides increased protection against deliberate or accidental substitution compared with lower-coded interlocking systems. Combined with electronic safety switching, status signalling and a practical 10 m cable, the ST GD210N10-G1T provides a versatile solution for integrating reliable guard monitoring into automated production machinery and industrial safety systems.
Typical Applications
- Industrial machine guard doors and access panels.
- Safety interlocking systems requiring high-level RFID coding.
- Packaging and processing machinery.
- Automated production and assembly equipment.
- Robot cells and automated manufacturing systems.
- Machine installations requiring longer direct cable runs to the control system.
