Why Choose the Finder 40.62.9.048.0000 Miniature Power Relay?
The Finder 40.62.9.048.0000 is a compact and reliable 10 A miniature electromechanical power relay designed for dependable electrical switching in industrial automation, control panels and electronic equipment. As part of the established Finder 40 Series miniature PCB and plug-in relay range, it combines a high switching capacity with compact dimensions and flexible installation options for industrial electrical control systems.
Featuring a 48 V DC operating coil and two changeover contacts (2 CO / DPDT), the Finder 40.62.9.048.0000 enables two separate electrical circuits to be switched simultaneously using a single control signal. Its silver nickel (AgNi) contact material provides dependable electromechanical switching performance for compatible resistive, control and industrial electrical loads.
With a 10 A rated contact current, a 250 V AC rated contact voltage and a 2500 VA AC1 resistive switching capacity, this relay is suitable for a wide range of industrial control applications. Its compact housing, measuring approximately 29 × 12.4 × 25 mm, allows straightforward integration into printed circuit boards, compatible relay sockets and electrical control equipment.
Key Advantages
- Compact miniature electromechanical power relay for industrial and electronic switching applications.
- 48 V DC nominal coil voltage for compatible DC control systems.
- 10 A rated contact current for switching suitable electrical loads.
- Two changeover contacts (DPDT) enable simultaneous switching of two independent circuits.
- 250 V AC rated contact voltage suitable for industrial electrical systems.
- 2500 VA AC1 switching capacity for resistive load applications.
- Silver nickel (AgNi) contacts provide dependable switching performance.
- Reinforced coil-to-contact insulation supports electrical isolation between control and load circuits.
- Compact housing minimises installation space in electronic equipment and control panels.
- Compatible with suitable Finder 95 Series relay sockets for convenient installation and replacement.
- Low coil power consumption supports efficient electrical control circuit operation.
Key Features
- Finder 40 Series miniature PCB and plug-in power relay.
- 40.62 double-pole changeover relay platform.
- 48 V DC nominal operating coil.
- 10 A rated contact current.
- 2 CO (DPDT / 2 Form C) contact configuration.
- 250 V AC rated contact voltage.
- 400 V AC maximum switching voltage.
- 2500 VA AC1 resistive switching capacity.
- 750 VA AC15 switching capacity at 230 V AC.
- 0.37 kW single-phase motor switching rating at 230 V AC.
- Silver nickel (AgNi) contact material.
- 3500 Ω nominal coil resistance.
- 0.65 W nominal coil power consumption.
- Approximately 14 mA nominal coil current.
- 6 kV coil-to-contact impulse withstand voltage.
- 8 mm creepage and clearance distance between the coil and contacts.
- 5 mm contact pin pitch for compact PCB integration.
- Monostable, non-latching electromechanical operation.
- Flux-proof relay construction for PCB assembly applications.
- Suitable for PCB mounting and compatible relay socket installations.
Reliable Dual-Circuit Switching for Industrial Automation
Electromechanical relays such as the Finder 40.62.9.048.0000 enable electrical loads to be controlled through a separate DC control circuit. When the 48 V DC coil is energised, the relay's internal electromagnetic mechanism changes the position of its contacts, allowing connected electrical circuits to be switched without passing the load current through the control device.
The two changeover contact (DPDT) configuration allows two independent circuits to be switched simultaneously. Each contact provides common, normally open and normally closed connections, making the relay suitable for signal routing, auxiliary switching and coordinated electrical control functions in industrial machinery and automation equipment.
The Finder 40.62 relay platform combines 10 A contact ratings, silver nickel contact technology and reinforced electrical insulation in a compact housing. Its 2500 VA AC1 resistive switching capacity makes it suitable for compatible electrical loads, while its PCB and socket mounting options support flexible integration into industrial control equipment. Appropriate load-specific ratings and protective measures should be observed when switching motors, inductive loads or DC circuits.
Typical Applications
- Industrial automation and machinery control systems.
- Electrical control panels and distribution equipment.
- PLC-controlled switching and interface circuits.
- Industrial equipment using 48 V DC control supplies.
- Dual-circuit switching and signal routing applications.
- Printed circuit board assemblies and electronic control equipment.
- Heating, ventilation and air conditioning control systems.
- Auxiliary motor control and contactor interface circuits.
- Building automation and electrical control installations.
- Power supply and electrical load switching systems.
- OEM equipment manufacturing and machine building.
- Industrial maintenance and replacement of compatible miniature relays.
