Why Choose the Finder 62.82.8.230.4309 Power Relay?
The Finder 62.82.8.230.4309 is a 16 A industrial electromechanical power relay from the Finder 62 Series, designed for reliable switching in industrial automation, machinery control and electrical control panels. Featuring a 230 V AC operating coil and 2 normally open contacts (2 NO / DPST-NO), it enables two separate electrical circuits to be switched simultaneously using a single control signal.
The 62.82.8.230.4309 features silver tin oxide (AgSnO2) contacts and a minimum 3 mm contact gap, providing a cadmium-free switching arrangement with increased separation between open contacts. Its 16 A rated contact current and 250 V AC rated contact voltage make it suitable for appropriately rated industrial electrical loads.
This model belongs to the Finder 62.82 Faston 250 range and uses 6.3 × 0.8 mm quick-connect terminals. The special 4309 version is designed without the rear mounting flange, providing an alternative installation arrangement for compatible industrial control assemblies.
Key Advantages
- 16 A rated contact current for appropriately rated industrial switching applications.
- 2 normally open contacts (DPST-NO) enable simultaneous switching of two independent electrical circuits.
- 230 V AC operating coil for compatible industrial AC control systems.
- Minimum 3 mm contact gap provides increased separation between open contacts.
- Silver tin oxide (AgSnO2) contacts provide a cadmium-free switching arrangement.
- Faston 250 terminals provide convenient quick-connect electrical connections.
- Flangeless 4309 construction offers an alternative to rear-flange-mounted relay versions.
- Monostable operation automatically returns the contacts to their open positions when coil power is removed.
Key Features
- Finder 62 Series industrial electromechanical power relay.
- 62.82 two-pole relay configuration.
- 2 NO (DPST-NO) contact arrangement.
- 16 A rated contact current.
- 230 V AC nominal coil voltage.
- 50/60 Hz AC coil operation.
- 3 VA nominal coil power consumption.
- 250 V AC rated contact voltage.
- 400 V AC maximum switching voltage.
- Minimum 3 mm contact gap.
- Silver tin oxide (AgSnO2) contact material.
- Faston 250 quick-connect terminals measuring 6.3 × 0.8 mm.
- 6-pin electrical connection arrangement.
- Without rear mounting flange for the special 4309 version.
- Monostable, non-latching electromagnetic operation.
- Suitable for industrial automation and electrical power switching.
Reliable Power Switching for Industrial Automation
The Finder 62.82.8.230.4309 uses an electromagnetic operating mechanism to control two normally open contact sets. When the 230 V AC coil is energised, both contacts close, allowing current to flow through their respective circuits. When the coil is de-energised, the contacts return to their open positions, interrupting the connected loads.
The 2 NO contact arrangement is useful where two electrical circuits must respond to a common control signal. Its 16 A rated contact current, minimum 3 mm contact gap and AgSnO2 contact material make it suitable for industrial switching duties within the manufacturer's specified load ratings.
The Faston 250 connection system provides convenient quick-connect termination, while the flangeless 4309 construction allows integration into suitable mounting arrangements. Electrical designers should verify the mechanical installation, conductor connections, switching category and protective devices before commissioning the relay.
Typical Applications
- Industrial automation and machinery control systems.
- 230 V AC-operated electrical control circuits.
- Industrial control panels and automation cabinets.
- Two-circuit electrical switching applications.
- Industrial lighting and auxiliary power control.
- Heating, ventilation and temperature control equipment.
- Motor starter auxiliary control and signalling circuits.
- OEM machinery and industrial electrical assemblies.
