Why Choose the Finder 65.31.9.110.4300 Power Relay?
The Finder 65.31.9.110.4300 is a heavy-duty 30 A industrial electromechanical power relay designed for reliable switching of high-current electrical loads. Part of the Finder 65 Series, this model combines a 110 V DC operating coil with a single normally open contact (SPST-NO / 1 Form A), making it suitable for industrial automation, machinery and electrical control systems.
Featuring silver tin oxide (AgSnO₂) contacts, the Finder 65.31.9.110.4300 provides a robust switching solution for compatible industrial loads. The 65.31-4300 configuration offers a 30 A rated contact current, 250 V AC rated contact voltage and 7,500 VA AC1 resistive switching capacity.
The relay features a minimum 3 mm open-contact gap, providing increased physical separation when the contact is open. Its Faston 250 quick-connect terminals and rear flange mounting arrangement support practical installation in compatible industrial panels and electrical equipment.
Key Advantages
- 30 A rated contact current for demanding industrial electrical switching.
- 110 V DC operating coil for compatible DC control systems.
- Single normally open contact (SPST-NO) for straightforward load control.
- Minimum 3 mm open-contact gap for increased physical contact separation.
- Silver tin oxide (AgSnO₂) contacts for dependable industrial switching.
- 7,500 VA AC1 resistive switching capacity for appropriately rated loads.
- 1.3 W nominal DC coil consumption.
- Faston 250 quick-connect terminals for convenient electrical connections.
- Rear flange mounting for secure chassis or panel installation.
- Non-latching operation returns the contact to its open state when coil power is removed.
- 30 million operations mechanical endurance under specified conditions.
- Suitable for industrial automation, heating equipment, machinery and electrical power control.
Key Features
- Finder 65 Series industrial power relay.
- 30 A rated contact current.
- 110 V DC nominal coil voltage.
- One normally open contact (1 NO).
- SPST-NO / 1 Form A contact configuration.
- 250 V AC rated contact voltage.
- 400 V AC maximum switching voltage, subject to applicable conditions.
- 7,500 VA AC1 resistive load rating.
- 1,250 VA AC15 switching capacity at 230 V AC.
- Silver tin oxide (AgSnO₂) contact material.
- Minimum 3 mm open-contact gap.
- 1.3 W nominal DC coil consumption.
- Approximately 11.8 mA nominal coil current.
- Approximately 9.31 kΩ calculated coil resistance.
- Faston 250 terminals measuring 6.3 × 0.8 mm.
- Rear flange mounting arrangement.
- Four electrical terminals for the coil and normally open contact.
- 30 million operations mechanical endurance.
- Monostable, non-latching operation.
Reliable 30 A Switching for 110 V DC Industrial Control Systems
The Finder 65.31.9.110.4300 operates as an electrically controlled power switch. When its 110 V DC coil is energised, the normally open contact closes and allows current to flow through the connected load circuit. When the coil supply is removed, the contact returns to its normally open position.
Its single-pole normally open contact arrangement is suitable for applications where one substantial electrical load must be activated by a separate control signal. The 30 A contact rating makes the 65.31-4300 configuration suitable for appropriately rated resistive loads, industrial heating equipment and other compatible electrical circuits.
The silver tin oxide contact material supports repeated switching within the manufacturer's specified electrical ratings. The minimum 3 mm open-contact gap provides increased physical separation when the relay is de-energised, although the complete installation must still satisfy the relevant electrical safety and isolation requirements.
The Faston 250 terminals allow convenient electrical connections using compatible receptacles, while the rear flange mounting arrangement supports secure attachment to suitable panels and chassis. The 110 V DC coil makes this relay particularly relevant to industrial control systems designed around that nominal DC supply voltage.
Typical Applications
- Industrial automation and electrical control panels.
- 110 V DC control circuits.
- High-current resistive load switching.
- Industrial heating elements and temperature control equipment.
- Commercial and industrial lighting control.
- Industrial machinery and manufacturing equipment.
- Electrical power management systems.
- Building automation and electrical installations.
- Industrial process control systems.
- Ventilation and HVAC equipment control.
- Conveyor systems and material handling equipment.
- Electrical equipment maintenance and relay replacement.
- Applications requiring a 110 V DC coil and 30 A normally open contact.
