65.61.9.012.4000 Finder Power relay PCB 1NO 30A DC 12VNO

Why Choose the Finder 65.61.9.012.4000 Power Relay?

The Finder 65.61.9.012.4000 is a robust 20 A electromagnetic power relay designed for dependable electrical switching in industrial automation, machinery control and commercial equipment. Featuring a 12 V DC operating coil and a 1 normally open + 1 normally closed (1 NO + 1 NC) contact configuration, this relay enables low-voltage control circuits to operate separate higher-power electrical loads.

Part of the established Finder 65 Series power relay range, the 65.61.9.012.4000 combines reliable electromagnetic operation with silver tin oxide (AgSnO₂) contacts and direct printed circuit board (PCB) mounting. Its bifurcated solder terminals support integration into industrial electronic assemblies, while its complementary contact arrangement enables two switching functions from a single control coil.

With a 20 A contact rating at 250 V AC, 12 V DC coil and compact PCB-compatible construction, the Finder 65.61.9.012.4000 is suitable for industrial heating equipment, electrical control boards, machinery and OEM automation systems. It is particularly useful where one circuit must close while another opens in response to a common control signal.

Key Advantages

• 20 A rated switching current for suitable resistive electrical loads.
• 12 V DC operating coil for integration into low-voltage control systems.
• 1 NO + 1 NC contact configuration for complementary electrical switching.
• 250 V AC rated contact voltage for industrial and commercial equipment.
• 5000 VA resistive switching capacity (AC1) under the applicable operating conditions.
• Silver tin oxide (AgSnO₂) contacts for reliable switching performance.
• PCB mounting with bifurcated terminals for secure soldered installation.
• Monostable electromagnetic operation returns the contacts to their normal states when the coil is de-energised.
• Non-polarised DC coil for straightforward connection to a compatible control supply.
• Galvanic separation between the coil and switched contact circuits.
• Suitable for industrial machinery, heating controls and OEM electronic assemblies.

Key Features

• Finder 65 Series electromagnetic power relay.
• Type 65.61 PCB-mounted configuration.
• 20 A rated contact current.
• 12 V DC nominal coil voltage.
• 1 normally open + 1 normally closed contact.
• 250 V AC rated contact voltage.
• 400 V AC maximum switching voltage.
• 5000 VA rated resistive switching capacity (AC1).
• Silver tin oxide (AgSnO₂) contact material.
• Direct PCB mounting with bifurcated solder terminals.
• Non-polarised DC coil.
• Monostable, non-latching relay operation.
• Separate normally open and normally closed switching functions.
• Electrical isolation between control and load circuits.
• Suitable for electronic control assemblies and industrial electrical equipment.

Reliable High-Current Switching with Complementary Contacts

The Finder 65.61.9.012.4000 allows a 12 V DC control circuit to operate two complementary electrical switching functions. When the coil is energised, the normally open contact closes while the normally closed contact opens. Removing the coil supply returns both contacts to their original states, providing predictable control of connected circuits.

This 1 NO + 1 NC configuration is useful in equipment where one electrical function must be enabled as another is disabled. Typical examples include alternative operating modes, control signalling and coordinated switching functions within industrial machinery. The contacts are not a changeover contact, so circuit designs should account for their separate contact arrangement.

With its 20 A rated contacts, AgSnO₂ contact material and PCB mounting design, the relay provides a practical switching solution for industrial control boards and OEM equipment. Suitable coil drive circuitry, contact protection, electrical clearances and PCB conductor sizing should be provided according to the intended load and installation conditions.

Typical Applications

• Industrial automation and electrical control systems.
• Printed circuit board assemblies requiring power switching.
• 12 V DC controlled electrical load circuits.
• Machinery requiring complementary NO and NC switching functions.
• Industrial heating and temperature control equipment.
• Commercial ovens and catering equipment.
• Boiler, burner and heating control assemblies.
• Industrial washing machines and commercial appliances.
• HVAC and ventilation control circuits.
• Electrical power management equipment.
• OEM electronic control boards and industrial machine building.