Why Choose the Partex ECHS224YELLOW 2:1 Yellow Heat Shrink Tubing?
The Partex ECHS224YELLOW is a versatile and practical 2:1 yellow heat shrink tubing designed for electrical insulation, cable protection and wire identification in industrial and commercial electrical installations. Part of the Partex ECHS heat shrink tubing range, this sleeving provides a convenient solution for protecting small electrical conductors, insulating connections and creating a neat, professional finish on cable assemblies.
Featuring a nominal supplied internal diameter of 2.4 mm and a fully recovered internal diameter of approximately 1.2 mm, the ECHS224YELLOW offers a 2:1 shrink ratio. When suitable heat is applied, the tubing contracts around appropriately sized conductors and components, creating a close-fitting protective covering that helps reduce abrasion and mechanical wear.
The distinctive yellow finish provides a highly visible colour for cable identification and organised wiring installations. Supplied in a generous 150 m pack, the ECHS224YELLOW is particularly suitable for electrical contractors, control panel manufacturers, industrial maintenance engineers and OEM equipment builders requiring consistent cable sleeving across multiple electrical assemblies.
Key Advantages
- Versatile 2:1 heat shrink tubing for electrical insulation and cable protection.
- 2.4 mm nominal supplied internal diameter suitable for small wires and electrical connections.
- 1.2 mm nominal recovered internal diameter provides a close-fitting finish on compatible conductors.
- Bright yellow colour supports visual cable identification and organised wiring.
- Heat-activated shrinking provides a secure fit around appropriately sized electrical components.
- Helps protect wiring against abrasion, handling damage and mechanical wear.
- Suitable for electrical insulation, wire identification and cable assembly.
- Can be cut to the required length for individual wiring and connection applications.
- Suitable for industrial control panels, electronic equipment and automation wiring.
- Generous 150 m pack supports high-volume electrical assembly and maintenance work.
Key Features
- Partex ECHS heat shrink tubing range.
- 2:1 shrink ratio for controlled diameter reduction when heated.
- 2.4 mm nominal supplied internal diameter.
- 1.2 mm nominal fully recovered internal diameter.
- Yellow colour for visible cable identification and professional wiring installations.
- Heat-shrinkable construction for close-fitting electrical sleeving.
- Suitable for protecting small electrical conductors and compatible connections.
- Provides an additional insulating and protective covering around appropriately prepared electrical assemblies.
- Flexible cut-to-length format for cable preparation and wiring applications.
- Suitable for protecting suitable cable identification markings and wire identification areas.
- Useful for industrial automation, control panel wiring and electronic assembly.
- Supplied in a 150 m pack.
Reliable Electrical Insulation and Cable Identification for Industrial Wiring
Heat shrink tubing is widely used in electrical engineering and industrial automation to provide an insulating and protective covering around wires, electrical connections and small components. When heated using a suitable controlled heat source, the tubing contracts in diameter to fit around the underlying conductor or assembly. This creates a neat protective covering that helps reduce exposure to abrasion, handling damage and mechanical wear.
The Partex ECHS224YELLOW 2:1 yellow heat shrink tubing has a nominal internal diameter of 2.4 mm before shrinking and a nominal fully recovered diameter of 1.2 mm. This makes it suitable for small-diameter electrical wires, compatible soldered joints and electronic connections. The yellow finish provides clear visual identification, helping installers organise wiring and distinguish designated conductors or cable groups within electrical equipment.
For dependable results, the tubing should be selected with sufficient initial diameter to pass over the largest part of the assembly and an appropriate recovered diameter to achieve the required fit. Heat should be applied evenly using suitable equipment, avoiding excessive temperatures that could damage the tubing or underlying insulation. Yellow sleeving should be used in accordance with the applicable conductor identification requirements, and standard heat shrink tubing should not be assumed to provide a waterproof seal unless an appropriate sealing construction is specified.
Typical Applications
- Electrical wire insulation and protection.
- Small-diameter cable sleeving and wiring assemblies.
- Protection of soldered electrical connections.
- Industrial control panel wiring and assembly.
- Electronic equipment manufacturing and repairs.
- Colour-coded cable and wire identification.
- Protection of suitable cable identification markings.
- Automation equipment and instrumentation wiring.
- OEM cable harness and wiring loom production.
- Electrical maintenance and repair applications.
- High-volume cable preparation and production assembly.
