Why Choose the Partex ECHS295YELLOW 2:1 Heat Shrink Tubing?
The Partex ECHS295YELLOW is a practical 2:1 heat shrink tubing designed for electrical insulation, wire identification, cable protection and professional cable management. Supplied in yellow, this heat shrink sleeve has a nominal supplied diameter of 9.5 mm and a nominal fully recovered diameter of 4.7 mm, making it suitable for compatible electrical cables, conductors and cable assemblies.
Designed for electrical installation, panel building and cable assembly work, the ECHS295YELLOW contracts when heated to form a close-fitting protective sleeve around suitable cables and components. Its 2:1 shrink ratio provides approximately a halving of the original internal diameter, helping create a neat and professional finish while supporting electrical insulation and protection against everyday handling and abrasion.
With a 9.5/4.7 mm diameter specification and a generous 75 m pack length, the Partex ECHS295YELLOW is well suited to electrical panel builders, wiring harness manufacturers, maintenance engineers and OEM production environments. The yellow colour provides clear visual identification within appropriately designed cable marking systems, while the supplied length supports repeated cutting and installation.
Key Advantages
- Versatile 2:1 heat shrink tubing for electrical insulation and cable protection.
- 9.5 mm supplied diameter suitable for compatible electrical cables and wiring assemblies.
- 4.7 mm fully recovered diameter for a close-fitting finish on appropriately sized components.
- Yellow colour supports visible cable identification and organised wiring systems.
- Heat-activated shrinking provides a neat, professional finish without requiring separate fastening components.
- Helps protect covered cable sections against abrasion and everyday handling.
- Suitable for electrical control panels, wiring harnesses and industrial automation equipment.
- 75 m pack length supports workshop use, panel building and repeated production requirements.
Key Features
- Partex ECHS295YELLOW heat shrink tubing.
- 2:1 heat shrink ratio.
- 9.5 mm nominal diameter before shrinking.
- 4.7 mm nominal fully recovered diameter.
- Yellow finish for visible cable identification and colour-coded applications.
- Heat-shrinkable sleeve for electrical insulation and cable protection.
- Suitable for compatible electrical wires, conductors and cable assemblies.
- Can be cut to the required length for individual installations.
- Supports tidy and organised wiring in electrical equipment.
- Suitable for industrial electrical assembly, manufacturing and maintenance.
- Supplied in a 75 m pack for professional use.
Reliable Electrical Insulation and Cable Identification
Heat shrink tubing provides a convenient way to insulate, identify and protect electrical cables and wiring assemblies. The Partex ECHS295YELLOW shrinks when heated, allowing the sleeve to conform closely to appropriately sized conductors and components. Its 2:1 shrink ratio makes it useful where a compact, secure-fitting sleeve and a clean installation finish are required. The yellow finish also makes the covered cable section easy to distinguish within a planned identification system.
The ECHS295YELLOW is particularly useful for electrical panel builders, automation engineers and wiring harness manufacturers working with cables that require protective sleeving or visual identification. Its 75 m supply length allows installers to cut individual sections to suit different applications, reducing the need to purchase numerous pre-cut lengths. For best results, select the tubing according to the cable's outside diameter and apply heat evenly with a suitable heat gun, following the manufacturer's installation guidance. Yellow sleeving should only be used for conductor identification where permitted by applicable wiring regulations.
Typical Applications
- Electrical wire insulation and cable protection.
- Colour-coded cable and conductor identification where appropriate.
- Industrial electrical control panels and cabinets.
- PLC wiring and industrial automation equipment.
- Wiring harness manufacturing and cable assembly.
- Protective sleeving for compatible cable connections.
- OEM electrical equipment manufacturing.
- Electrical maintenance, repair and workshop applications.
- Cable management in machinery and industrial control systems.
- Protective finishing of suitably sized wiring assemblies.
