Why Choose the Partex HL200-RED Red Hook & Loop Cable Ties?
The Partex HL200-RED is a versatile red hook and loop cable tie designed for reusable cable bundling, adjustable wire management and convenient cable organisation. Measuring 200 mm in length and 12.5 mm in width, these flexible fastening straps provide a practical alternative to conventional plastic cable ties for installations where cables may need to be accessed, rearranged or added after initial installation.
Featuring a reusable hook and loop fastening system, the Partex HL200-RED allows cable bundles to be secured, released and repositioned without cutting the fastening. This makes these straps particularly useful for organising data cables, communications wiring, electrical leads and equipment connections where frequent adjustments, straightforward maintenance and careful cable handling are important.
Supplied in a convenient pack of 100 red hook and loop cable ties, the HL200-RED is suitable for electricians, network installers, IT technicians, control panel builders and maintenance engineers. Its distinctive red colour also supports user-defined colour-coded cable management systems, helping installers visually distinguish selected wiring groups, equipment connections or cable routes.
Key Advantages
- Reusable hook and loop fastening allows cable bundles to be opened, adjusted and secured again.
- 200 mm length and 12.5 mm width provide a practical fastening format for electrical and data cable organisation.
- Red colour supports visual identification and user-defined colour-coded cable management.
- Flexible fastening strap offers adjustable cable retention without the rigid locking mechanism of a conventional nylon cable tie.
- No cutting required for release, making routine cable additions and maintenance more convenient.
- Pack of 100 provides a useful quantity for professional installation, equipment assembly and maintenance.
- Suitable for data cables, communications wiring, electrical leads and general cable organisation.
- Helps reduce unnecessary replacement of single-use cable ties during suitable maintenance tasks.
- Convenient for temporary cable arrangements and installations where wiring configurations may change.
Key Features
- Partex HL200-RED hook and loop cable ties.
- 200 mm nominal length for versatile cable bundling applications.
- 12.5 mm nominal width for a broad, flexible fastening strap.
- Red finish for convenient visual identification.
- Hook and loop fastening mechanism for adjustable cable retention.
- Reusable design for repeated opening and closing when the fastening remains in good condition.
- Suitable for cable groups requiring periodic access or repositioning.
- 100 individual hook and loop ties per pack.
- Useful for network installations, communications equipment and electrical cable management.
- Can be applied and released by hand without specialist fastening tools.
Reusable Hook & Loop Fastening for Flexible Cable Management
Electrical, networking and communications installations often require cable bundles to be adjusted during commissioning, maintenance or equipment upgrades. Conventional non-releasable plastic cable ties generally need to be cut before cables can be added or removed. The Partex HL200-RED offers a convenient alternative through its reusable hook and loop fastening system, allowing technicians to open and adjust cable bundles without cutting the strap.
This adjustable design is particularly useful in network cabinets, communications installations, equipment enclosures and workstations where cable arrangements may change over time. Installers can secure wiring during initial assembly and subsequently release the fastening to add, remove or reroute cables as required.
Hook and loop cable ties can also be a practical choice for cables that should not be tightly compressed. Their adjustable fastening allows installers to secure bundles without unnecessary pressure, although cable manufacturer recommendations for bend radius, bundling and mechanical handling should always be followed.
Red Hook & Loop Ties for Colour-Coded Cable Identification
The distinctive red finish of the Partex HL200-RED makes these hook and loop ties particularly useful for installations employing visual cable identification. Different colours can be assigned to particular equipment groups, wiring routes, network connections or maintenance categories, helping technicians recognise selected cable bundles more easily.
In structured cabling environments, red hook and loop cable ties can form part of a user-defined colour-coding system for distinguishing specific network connections, equipment assemblies or cable groups. This can support clearer cable organisation in network racks, communications cabinets, equipment rooms and industrial installations.
The red colour does not automatically indicate a particular electrical function, voltage classification, fire alarm circuit or other standardised designation. Any colour identification scheme should be documented and applied consistently according to the requirements of the installation.
Easy Installation, Adjustment and Reuse
Installing the Partex HL200-RED is straightforward. Position the hook and loop strap around the selected cable bundle, wrap it to the required fit and press the fastening surfaces together to secure the cables. The closure can then be opened and adjusted by hand whenever cable access or repositioning is required.
The 200 mm length provides a practical fastening reach for compatible cable groups, while the 12.5 mm width offers a broad contact area for adjustable bundling. For data and communications cables, avoid overtightening and maintain the minimum bend radius and installation requirements specified by the cable manufacturer.
Before repeated reuse, inspect the hook and loop surfaces for wear, contamination or reduced fastening performance. Replace any strap that no longer secures the intended bundle adequately. For demanding environments involving heat, chemicals, moisture or prolonged sunlight, confirm the manufacturer's environmental suitability specifications before installation.
Typical Applications
- Structured cabling and network rack cable management.
- Data centre and server cabinet cable organisation.
- Ethernet and communications cable bundling.
- Electrical control panel wiring requiring adjustable fastening.
- Audio, visual and multimedia equipment cabling.
- Workstation and office cable organisation.
- Telecommunications equipment and patch panel installations.
- Temporary cable routing during installation and commissioning.
- Colour-coded cable grouping in equipment rooms and industrial facilities.
- Maintenance applications requiring regular cable access and repositioning.
