Why Choose the Partex HSMB254BROWN 2:1 Brown Heat Shrink Tubing?
The Partex HSMB254BROWN is a versatile brown heat shrink tubing designed for electrical insulation, cable protection and colour-coded conductor identification in industrial and commercial electrical installations. Featuring a 2:1 shrink ratio, the tubing contracts to approximately half its original internal diameter when heated, creating a close-fitting protective sleeve around suitably sized cables, wires and electrical components.
As part of the Partex HSMB heat shrink tubing range, HSMB254BROWN provides a practical solution for electrical contractors, control panel builders and maintenance engineers requiring organised wiring and dependable cable protection. Its brown finish supports visual conductor identification and is particularly useful in installations where brown is used to identify a line conductor in accordance with applicable electrical wiring standards.
With a nominal supplied internal diameter of 25.4 mm, a nominal fully recovered internal diameter of 12.7 mm and a 5 m pack length, this heat shrink tubing is suitable for larger cable sections, conductor terminations and electrical wiring assemblies. Its cut-to-length format allows installers to prepare individual protective sleeves for cable insulation, identification and maintenance applications.
Key Advantages
- 2:1 heat shrink ratio provides a close-fitting sleeve around appropriately sized cables and electrical components.
- 25.4 mm supplied internal diameter reduces to approximately 12.7 mm after full recovery.
- Brown colour supports conductor identification and colour-coded electrical wiring systems.
- Provides additional electrical insulation and mechanical protection when correctly selected and installed.
- 5 m pack length allows flexible cutting for individual installation requirements.
- Suitable for industrial control panels, electrical distribution assemblies and cable harness applications.
- Helps protect covered cable sections against abrasion and routine handling damage.
- Supports neat, professional and easily identifiable electrical wiring installations.
Key Features
- Partex HSMB heat shrink tubing range.
- 2:1 shrink ratio for controlled diameter reduction.
- 25.4 mm nominal supplied internal diameter.
- 12.7 mm nominal fully recovered internal diameter.
- Brown colour for conductor identification and colour-coded wiring.
- 5 m pack length for flexible cutting and installation.
- Heat-activated shrinking creates a close-fitting protective covering.
- Suitable for cable insulation, conductor protection and electrical identification applications.
- Can be cut into shorter sections for individual cable and termination requirements.
- Designed for electrical installation, maintenance and cable assembly work.
Reliable Cable Insulation and Colour-Coded Conductor Protection
Heat shrink tubing provides a convenient method of protecting, insulating and identifying electrical wiring. When suitable heat is applied, the tubing contracts around the cable or component, forming a close-fitting sleeve that helps protect against abrasion, handling damage and accidental contact with covered conductive parts. The Partex HSMB254BROWN features a 2:1 shrink ratio, allowing its nominal internal diameter to reduce from 25.4 mm to 12.7 mm when fully recovered.
The brown finish is particularly useful in electrical installations where conductor colour identification is important. Under current UK harmonised wiring colour conventions, brown identifies a line conductor in single-phase circuits and the L1 conductor in three-phase circuits. HSMB254BROWN can therefore be used for appropriately sized conductor identification applications where permitted by the relevant installation standards. For dependable results, the tubing should be selected according to the cable dimensions, required insulation performance and environmental conditions, then installed using suitable controlled heating equipment. It should not be treated as a substitute for a correctly rated electrical connection or primary insulation system without appropriate verification.
Typical Applications
- Electrical cable insulation and protection.
- Brown line conductor identification in suitable electrical installations.
- Industrial control panel wiring and cable management.
- Electrical distribution boards and switchgear assemblies.
- Protective sleeving for appropriately sized cable joints and terminations.
- Industrial automation equipment and machinery wiring.
- Electrical equipment maintenance and refurbishment.
- OEM cable harnesses and electrical wiring assemblies.
- Colour-coded identification of selected conductor groups.
- General electrical installation and workshop applications.
