Why Choose the Partex SW19N Natural Spiral Cable Wrap?
The Partex SW19N natural spiral wrap is a flexible spiral cable binding and protection solution designed to organise, bundle and protect electrical cables, wiring looms and flexible hoses. Suitable for cable bundles measuring 15 mm to 50 mm in diameter, this versatile cable management product provides a practical way to keep wiring organised while maintaining flexibility and access to individual cables.
Part of the Partex SW spiral wrap range, the SW19N features an open helical construction that can be wound around existing cable bundles without disconnecting cable terminations. Unlike fully enclosed braided sleeving or rigid conduit, its spiral design allows individual cables to enter or exit the bundle at different points along the cable route. This makes it particularly useful for electrical control panels, industrial machinery, automation equipment and wiring harness assemblies.
Supplied in a convenient 10 m pack, the Partex SW19N natural spiral cable wrap can be cut to the required installation length, making it suitable for both individual cable runs and multiple smaller cable management tasks. Its flexible construction accommodates bends and changes in cable routing, while the natural finish provides a neutral appearance for electrical installations and equipment assemblies. The SW19N is an excellent choice for electrical contractors, panel builders, machinery manufacturers and industrial maintenance professionals.
Key Advantages
- Suitable for cable bundles from 15 mm to 50 mm in diameter, providing versatile cable management.
- Flexible spiral construction accommodates bends, curves and irregular cable routes.
- 10 m pack length provides a convenient supply for installation and maintenance projects.
- Natural finish offers a neutral appearance for electrical and industrial equipment.
- Helps organise multiple cables into a single, manageable wiring bundle.
- Open helical design allows individual cables to branch out at different points.
- Can be installed around existing cables without disconnecting their terminations.
- Helps reduce loose wiring, cable tangling and everyday rubbing.
- Can be cut to length to suit different cable routes and equipment assemblies.
- Allows easier access to individual cables than fully enclosed sleeving.
- Provides a flexible alternative to rigid conduit for general cable organisation.
- Suitable for electrical installation, equipment manufacturing and industrial maintenance work.
Key Features
- Partex SW series spiral cable wrap.
- Manufacturer part number: SW19N.
- Suitable cable bundle diameter: 15 mm to 50 mm.
- Colour: Natural.
- Pack length: 10 m.
- Flexible helical cable wrapping construction.
- Open spiral profile for convenient cable branching.
- Designed for electrical cable bundling, organisation and additional surface protection.
- Can be fitted around existing wiring assemblies.
- Flexible design accommodates changes in cable routing direction.
- Suitable for grouping compatible power, control and signal cables.
- Can be cut into shorter lengths for individual installations.
- Helps reduce light abrasion and incidental mechanical contact.
- Suitable for electrical control panels, industrial machinery and automation equipment.
- Allows individual cables to enter or exit between spiral turns.
- Natural finish provides an alternative to black spiral cable wrap.
- Convenient 10 m supply length for professional installation work.
Technical Specifications
- Manufacturer: Partex
- Product range: SW Spiral Wrap
- Model: SW19N
- Product type: Flexible spiral cable wrap
- Product category: Cable management and cable protection
- Suitable bundle diameter: 15 mm to 50 mm
- Minimum bundle diameter: 15 mm
- Maximum bundle diameter: 50 mm
- Colour: Natural
- Pack length: 10 m
- Construction: Flexible helical spiral wrap
- Design: Open spiral cable binding
- Primary function: Cable bundling, organisation and additional surface protection
- Installation method: Spiral wrapping around cable bundles
- Cable branching: Individual cables can enter or exit between spiral turns
- Cutting: Can be cut to the required installation length
- Typical applications: Electrical wiring, cable harnesses, industrial machinery and control equipment
- Suitable installation environments: Electrical, industrial and mechanical equipment, subject to material and environmental compatibility
- Product identification: SW19N
Flexible Natural Spiral Wrap for Electrical Cable Bundling and Industrial Cable Management
The Partex SW19N spiral wrap provides a practical solution for installations where multiple electrical cables need to be organised into a single bundle while remaining accessible. Its open helical construction allows the wrap to be wound around existing wiring without removing connectors or disconnecting cable terminations. This makes it particularly useful for cable management improvements, maintenance work and equipment modifications.
With a specified 15 mm to 50 mm cable bundle diameter range, the SW19N accommodates a variety of wiring assemblies and cable harness sizes. The flexible spiral profile allows the wrap to follow changes in cable routing and accommodate compatible bundles within its intended diameter range. Installers should select the wrap according to the complete cable bundle diameter and allow sufficient flexibility for the cables being secured.
One of the main advantages of spiral cable wrap is its ability to support cable branching. Individual wires can enter or exit between adjacent spiral turns without requiring the entire bundle to be opened. This is particularly beneficial in industrial automation systems, where wiring may need to branch towards sensors, switches, motors, terminal blocks and other electrical components along a shared cable route.
The natural finish provides a neutral alternative to black spiral wrap and can be useful where a lighter-coloured cable management product is preferred. In installations containing multiple cable groups, different wrap colours may also support visual organisation when used alongside a documented cable identification system. Colour should not be relied upon as the sole means of identifying electrical safety functions or circuit ratings.
The SW19N also provides an additional layer between cables and surrounding equipment surfaces, helping reduce light abrasion, incidental rubbing and cable tangling. However, its open spiral construction does not provide continuous coverage. It should not be used as a substitute for electrical insulation, liquid-tight conduit or specialised protection against severe abrasion, sharp edges, heavy mechanical impact or other significant hazards.
The supplied 10 m length can be divided into shorter sections to suit individual cable runs, helping installers use only the material required. For reliable results, the spiral wrap should be installed without excessively compressing the cable bundle or restricting cable bend radii. The material's temperature limits, chemical compatibility and suitability for ultraviolet exposure should be checked against the manufacturer's specifications before use in demanding environments.
Typical Applications
- Industrial electrical cable bundling and organisation.
- Electrical control panel wiring management.
- Industrial automation and control system installations.
- Machinery wiring harnesses and equipment assemblies.
- Sensor, actuator and motor cable routing.
- Electrical equipment manufacturing and maintenance.
- Power, control and signal cable grouping where permitted by installation requirements.
- Cable routes requiring individual wires to branch from a main bundle.
- Wiring loom organisation in mechanical equipment.
- Industrial maintenance and cable refurbishment projects.
- Flexible cable routing around machinery and equipment.
- Organising cables beneath workstations and equipment benches.
- Reducing loose and tangled wiring in electrical installations.
- Applications requiring adjustable cable bundling and convenient cable access.
