Why Choose the ABB TZ601 TwinLine-G Carrier Rail?
The ABB TZ601 is an unmounted carrier rail / mounting strip for ABB TwinLine-G electrical cabinets, designed to support mounting frame holders within compatible low-voltage distribution enclosures. It forms part of ABB's TwinLine cabinet accessory system and is specifically intended for cabinets with a nominal depth of 225 mm.
The TZ601 provides the mounting interface required when configuring or expanding TwinLine-G cabinet interiors with mounting frame components. Depending on the cabinet configuration, additional carrier rails can be retrofitted to support the required arrangement of mounting frames, mounting plates and associated distribution equipment.
Manufactured from plastic, the TZ601 measures 22 mm wide × 18 mm high × 24 mm deep and is supplied as an individual unmounted accessory. ABB TwinLine-G cabinets are designed around a nominal 225 mm cabinet depth, making the TZ601 the corresponding carrier rail for this enclosure depth.
Key Advantages
- Purpose-designed carrier rail for ABB TwinLine-G cabinets.
- Suitable for TwinLine-G enclosures with a nominal depth of 225 mm.
- Provides a mounting interface for mounting frame holders.
- Can be retrofitted where additional mounting strips are required by the cabinet configuration.
- Supports flexible expansion of compatible TwinLine internal mounting arrangements.
- Original ABB enclosure accessory for dependable system compatibility.
Key Features
- ABB TZ601 TwinLine-G carrier rail / mounting strip.
- Designed for 225 mm deep TwinLine-G cabinets.
- For installation of compatible mounting frame holders.
- 22 mm product width.
- 18 mm product height.
- 24 mm product depth.
- Manufactured from plastic.
- Supplied unmounted.
- Suitable for retrofit installation where additional mounting strips are required.
- Compatible with ABB TwinLine modular cabinet expansion arrangements.
Flexible Mounting Support for TwinLine-G Cabinets
ABB TwinLine cabinets use mounting strips together with mounting frame holders to provide structured fixing points for internal distribution equipment. The TZ601 is the dedicated mounting strip for TwinLine-G cabinets with a 225 mm nominal depth, allowing additional mounting support to be added when required by the selected internal configuration.
Factory-configured TwinLine cabinets incorporate mounting strips at defined positions, while additional strips can be retrofitted depending on the expansion arrangement. The TZ601 therefore provides panel builders with an original ABB component for extending compatible mounting-frame, mounting-plate and modular distribution configurations within TwinLine-G enclosures.
Typical Applications
- ABB TwinLine-G electrical distribution cabinets.
- Cabinets with a nominal depth of 225 mm.
- Mounting frame holder installations.
- Retrofit expansion of TwinLine internal mounting arrangements.
- Low-voltage sub-distribution assemblies.
- Commercial and industrial panel-building applications.
