ABB EPH-S60012 Protecta Home 12-Way 63A Main Switch Consumer Unit
The ABB EPH-S60012 Protecta Home 12-Way 63A Main Switch Consumer Unit (ABB order code 1TVC151800S3094) is a steel electrical distribution board designed to accommodate compatible outgoing circuit protective devices. Featuring 12 outgoing ways and a factory-fitted 63 A main switch isolator, it provides a compact and organised solution for suitable residential and similar low-voltage electrical installations.
Part of ABB's Protecta Home consumer unit range, the EPH-S60012 combines a robust steel enclosure with a straightforward main switch configuration. Its incoming isolator provides a means of disconnecting the consumer unit supply, while the outgoing circuit protection can be selected to meet the specific requirements of the electrical installation.
ABB specifies nominal enclosure dimensions of 250 × 330 × 105 mm (height × width × depth) for the EPH-S60012. The enclosure is finished in RAL 7035 grey and is supplied with a shrouded busbar, neutral bar, earth bar and installation instructions, together with the factory-fitted main switch.
The 12-way capacity provides flexibility for installations requiring several separately protected circuits without the size of a larger consumer unit. The EPH-S60012 is particularly useful where a 63 A incoming switch is appropriate for the installation design and a main-switch-only arrangement is preferred over a factory-fitted RCCB or split-load configuration.
Key Advantages
- 12 outgoing ways provide capacity for a practical multi-circuit distribution arrangement.
- Factory-fitted 63 A main switch provides incoming electrical isolation.
- ABB Protecta Home construction offers a coordinated consumer unit solution.
- Steel enclosure provides a robust housing for compatible electrical equipment.
- Shrouded busbar included as part of the standard consumer unit assembly.
- Neutral and earth bars supplied for appropriate conductor termination.
- Installation instructions included to support professional installation.
- 330 mm nominal width provides a compact format for 12 outgoing ways.
- 250 mm nominal height supports efficient use of wall space.
- 105 mm nominal depth assists enclosure positioning and cable-entry planning.
- RAL 7035 grey finish offers a professional appearance for electrical service areas.
- Main switch configuration allows suitable outgoing protective devices to be selected according to the circuit design.
- BS EN 61439-3 steel enclosure specification supports appropriate consumer unit assembly applications.
- Part of a wider ABB range with alternative way capacities and incoming switch ratings.
- Clearly identified ABB order code supports accurate specification, procurement and maintenance records.
Key Features
- ABB EPH-S60012 Protecta Home consumer unit.
- 12-way outgoing circuit configuration.
- 63 A incoming main switch isolator.
- Factory-fitted switch disconnector.
- Steel consumer unit enclosure.
- RAL 7035 grey finish.
- Shrouded busbar supplied.
- Neutral terminal bar supplied.
- Protective earth terminal bar supplied.
- Installation instructions included.
- 250 mm nominal height.
- 330 mm nominal width.
- 105 mm nominal depth.
- Main switch consumer unit configuration.
- Incoming isolation function.
- Compatible modular protective device accommodation.
- Protecta Home steel enclosure specification to BS EN 61439-3.
- Designed for suitable low-voltage distribution applications.
- Manufacturer model EPH-S60012.
- ABB order code 1TVC151800S3094.
12-Way Electrical Distribution with 63A Incoming Isolation
The ABB EPH-S60012 is intended for electrical installations where a 12-way consumer unit and 63 A incoming main switch meet the requirements of the distribution design. Its main-switch-only arrangement gives the installer flexibility to select compatible outgoing protective devices for the intended circuits.
The factory-fitted 63 A switch disconnector provides the incoming isolation function. This allows the consumer unit supply to be disconnected using the main switch. It is important to distinguish the switch's isolation function from circuit protection: the isolator does not independently provide residual current, overload or short-circuit protection.
The 63 A rated current applies to the incoming main switch. It does not mean that each outgoing circuit can carry 63 A, nor does it establish the permissible demand of the complete electrical installation. The electrician must consider supply characteristics, conductor ratings, protective device coordination, expected demand and thermal performance.
The 12 outgoing ways provide room for a suitable arrangement of final-circuit protective devices. Depending on the electrical design, these may include compatible MCBs or RCBOs. The actual number of devices that can be accommodated depends on their module widths, busbar compatibility and the manufacturer's approved assembly arrangements.
ABB specifies that its Protecta Home steel consumer units are supplied complete with a shrouded busbar, neutral bar and earth bar. These components provide the basis for an organised internal distribution arrangement, supporting appropriate connection of incoming and outgoing conductors.
The 250 × 330 × 105 mm nominal enclosure dimensions should be considered when planning the mounting position. Adequate space must be allowed for cable entry, conductor bending, access to the main switch and protective devices, inspection and maintenance.
The EPH-S60012 is not a factory-fitted RCCB consumer unit. Where additional protection by RCDs is required, the completed electrical design must incorporate appropriate devices. A main switch consumer unit can be suitable for an RCBO-based arrangement, provided the selected devices and assembly configuration are approved by ABB.
For projects requiring a different incoming switch rating, ABB also offers the EPH-S10012 12-way 100 A main switch consumer unit. Both models provide 12 outgoing ways, but their incoming switch ratings differ. Selection should be based on the installation design rather than enclosure capacity alone.
Installation and commissioning must be undertaken by a competent electrical professional in accordance with ABB's instructions and applicable requirements of BS 7671. The installer must verify protective device compatibility, conductor sizing, earthing arrangements, circuit identification, enclosure suitability and final electrical test results before energising the installation.
Typical Applications
- Residential electrical distribution installations.
- Domestic consumer unit replacement projects.
- New-build residential electrical installations.
- Residential electrical refurbishment and upgrades.
- Multi-circuit domestic distribution arrangements.
- Installations requiring a 63 A incoming main switch.
- Projects using individually selected outgoing protective devices.
- Consumer unit installations requiring 12 outgoing ways.
- Electrical distribution in suitable indoor utility areas.
- Professional consumer unit assembly and commissioning.
- Building electrical service areas.
- Small low-voltage distribution installations.
- Electrical contracting and maintenance projects.
- Projects specifying ABB Protecta Home distribution equipment.
