Why Choose the Cembre DSVA50 Aluminium Through Connector?
The Cembre DSVA50, product code 8016403, is a professional aluminium compression through connector designed for joining aluminium conductors in power distribution and electrical installation applications. Manufactured in accordance with DIN 46267 Part 2, it provides a dependable solution for creating permanent crimped connections between compatible aluminium cables.
The DSVA50 is manufactured from aluminium tube with a minimum purity of 99.5%. The connector is supplied with special contact grease which helps break down the aluminium oxide layer in the compression area during crimping, supporting an effective electrical connection. The tube ends are protected for storage and transport prior to installation.
Designed for aluminium conductors in the 50–70 mm² range, the DSVA50 has an internal diameter of approximately 9.8 mm and an overall length of approximately 85 mm. The connector is suitable for compatible aluminium cables in electrical systems rated up to 10 kV.
Key Advantages
- Professional aluminium compression connector for 50–70 mm² conductors.
- Manufactured in accordance with DIN 46267 Part 2.
- Aluminium tube manufactured with a minimum purity of 99.5%.
- Pre-filled with special contact grease to assist with oxide-layer disruption during crimping.
- Suitable for compatible aluminium cable systems rated up to 10 kV.
- Compression design provides a secure mechanical and electrical cable joint.
Key Features
- Cembre DSVA aluminium compression connector series.
- 50–70 mm² conductor range.
- 9.8 mm internal diameter.
- 85 mm overall length.
- Manufactured from minimum 99.5% pure aluminium.
- Manufactured according to DIN 46267 Part 2.
- Suitable for compatible aluminium conductors up to 10 kV.
- Supplied with contact grease inside the connector.
- Compression crimp connection for permanent cable joints.
- Protected tube ends assist with storage and transport before installation.
Reliable Connections for Aluminium Power Cables
Compression through connectors such as the Cembre DSVA50 provide a permanent method of joining compatible aluminium conductors. Correct compression creates a mechanically strong connection while establishing the low-resistance electrical path required for reliable power distribution and industrial electrical installations.
Aluminium naturally develops an oxide layer that can affect electrical connections if it is not properly managed. The DSVA series addresses this by incorporating special contact grease within the connector, helping disrupt the oxide layer in the compression area during installation and supporting a reliable connection.
Typical Applications
- Aluminium power cable joints.
- Industrial power distribution systems.
- Electrical distribution networks.
- Medium voltage cable installations up to 10 kV.
- Infrastructure and utility electrical systems.
- Professional cable installation and maintenance.
