Cable & Cable Management

Cable and Cable Management for Control Panels

Cable and cable management is where a well-built panel is won or lost. LED Controls Ltd stocks everything from the wire itself to the parts that terminate, route, identify and protect it: tri-rated panel wire and control cable, ferrules and crimps, cable marking systems and markers, glands and cable ties, panel trunking, conduit and fittings and crimping and stripping tools.

Leading brands include Cembre, Partex, TE Connectivity, Eland Cables, ABB, ILME and Wago. Filter by brand or browse the sub-categories above; most consumables are sold in packs, so check the pack quantity before ordering.

Cable and Cable Management for Control Panels

Cable and cable management is where a well-built panel is won or lost. LED Controls Ltd stocks everything from the wire itself to the parts that terminate, route, identify and protect it: tri-rated panel wire and control cable, ferrules and crimps, cable marking systems and markers, glands and cable ties, panel trunking, conduit and fittings and crimping and stripping tools.

Cable
474 Products

Tri-rated cable (BS 6231 / UL 1015 / CSA) is the standard flexible single-core wire for internal panel wiring, and this range stocks it by the 100 m roll in…

Shop Cable →
Cable Glands
1,202 Products

Cable glands seal and strain-relieve cables where they enter an enclosure, keeping its IP rating. This range covers ABB EMC metallic compression glands, Cembre metric and Pg glands with locknuts,…

Shop Cable Glands →
Cable Markers
512 Products

Cable markers identify every conductor with numbers, letters and symbols for faster commissioning and fault-finding. This range is built around the Partex everyday ranges: PZ and PA slide-on markers, PC…

Shop Cable Markers →
Cable Ties
472 Products

Cable ties bundle and secure cable runs inside panels and along trays. We stock Partex nylon ties, uncoated and coated stainless steel ties for outdoor and harsh environments, tie mounts,…

Shop Cable Ties →
Clamps & Shrouds
102 Products

Cable clamps and shrouds secure and protect cables at entry points and along their run – including Wago branch boxes for multicore cables and Cembre clip fasteners. This is a…

Shop Clamps & Shrouds →
Conduit & Fittings
42 Products

Flexible conduit and fittings protect cables running between enclosures, machines and motors. This range stocks ABB nylon and polypropylene conduit contractor packs, adaptors, stopping plugs and Ex-e sealing fittings, plus…

Shop Conduit & Fittings →
DIN Rail & Supports
18 Products

DIN rail (35 mm top-hat, EN 60715) is the mounting backbone of a control panel. This range holds slotted steel rail in 1 m lengths and ILME pre-cut rails sized…

Shop DIN Rail & Supports →
Panel Trunking
109 Products

Slotted panel trunking routes and organises wiring inside a control enclosure, keeping bundles separated and accessible. We stock ABB narrow-slot PVC trunking in 2 m lengths across the common width…

Shop Panel Trunking →
Spiral Wrap & Sleeving
448 Products

Spiral wrap and sleeving bundle and protect cable looms outside the enclosure, particularly on moving machinery. This range is being built out; for cable protection in the meantime see Conduit…

Shop Spiral Wrap & Sleeving →
Tooling
1,050 Products

The right crimping and stripping tools make terminations reliable and repeatable. This range stocks Cembre mechanical, battery and hydraulic crimping tools, dies, cable cutters and marker printers, ILME crimp, insertion…

Shop Tooling →

Choosing the Right Cable Management Products

Tidy, well-terminated wiring is what separates a professional control panel from a difficult one to maintain. Selecting the right termination, identification and containment products up front saves time on the bench and on site.

Ferrules & Crimps

Insulated ferrules and crimp terminals give every stranded conductor a secure, gas-tight termination that meets panel wiring standards.

  • Control panels
  • Terminal wiring
  • Motor connections
  • Earth bonding
  • Field wiring
Learn More →
Cable Marking Systems

Cable markers, sleeves and printers identify every core so that fault-finding and modifications are quick and safe.

  • Core identification
  • Terminal labelling
  • Switchgear
  • Machine wiring
  • Data cabling
Learn More →
Panel Trunking

Slotted panel trunking routes and protects wiring inside the enclosure, keeping power and control cores separated.

  • Enclosure wiring
  • Cable routing
  • Segregation
  • Retrofits
  • MCC panels
Learn More →
FeatureFerrules & CrimpsCable MarkingPanel Trunking
PurposeConductor terminationIdentificationRouting & protection
Installed WithCrimp toolingPrinter or pre-printedSnap-in / screw fix
StandardsIEC 60947-1 / DIN 46228IEC 60445 / BS 7671IEC 61084
MaterialsCopper, insulated PPPVC, halogen-free, heat-shrinkPVC, halogen-free
Typical ApplicationsEvery panel terminationPanels, machines, installationsEnclosures, MCCs

Cable Management by Application

Explore common wiring applications and the containment, termination and identification products we recommend for each.

Control Panel Wiring

Ferrules, panel trunking and markers for clean, standards-compliant panel wiring that is easy to maintain.

Machine Wiring

Flexible cable, glands and sleeving to route power and control wiring around moving machinery.

Enclosure Entries

IP-rated cable glands and conduit fittings that keep the enclosure rating intact where cables enter.

Identification & Labelling

Printed cable markers, terminal labels and component labels so every panel is traceable to its drawings.

Termination & Tooling

Crimp tools, strippers and cutters matched to the ferrules and lugs you use every day.

Recommended Products
Site Installation

Cable, ties, clamps and DIN rail for site installs and modifications to existing systems.

Trusted Cable Management Manufacturers

We stock termination, identification and containment products from manufacturers that panel builders rely on every day.

Cembre

Cembre manufactures crimp terminals, ferrules, cable markers, label printers and the professional crimp tooling to install them.

Explore Cembre Products →
Partex

Partex cable and wire markers, sleeves and printers are a long-standing standard for identification in panels and installations.

Explore Partex Products →
IMO

IMO supplies panel trunking, DIN rail, glands and wiring accessories at competitive prices for high-volume panel building.

Explore IMO Products →
Eland Cables

Eland supplies control, power and data cables to recognised standards for machines, panels and industrial installations.

Explore Eland Cables Products →

Looking for Another Manufacturer?

In addition to Cembre, Partex, IMO and Eland Cables, we supply products from over 40 leading industrial automation manufacturers, helping engineers source everything they need from one trusted supplier.

View All Manufacturers

Frequently Asked Questions

Common questions about terminations, cable marking and panel containment. Our technical team can help with anything specific to your build.

Do I need to use ferrules on stranded conductors?
Yes for a professional panel. Insulated ferrules stop stray strands, give a consistent termination in screw and spring-clamp terminals and are expected under IEC 60204-1 machine wiring practice.
What size ferrule do I need?
Match the ferrule to the conductor cross-section (0.25 mm² to 50 mm² and above) and to the terminal entry. Colour-coded insulation follows DIN 46228 or the French colour code; we can advise which your terminals require.
Which cable marking system should I choose?
Pre-printed slide-on markers suit small jobs; for panels with hundreds of cores a thermal-transfer marker printer with sleeves or self-laminating labels is faster and more consistent.
How do I keep the IP rating where cables enter an enclosure?
Use an IP68 cable gland sized to the cable outside diameter, or a sealed conduit fitting, and a matching locknut or sealing washer at the enclosure wall.
Do you supply halogen-free trunking and ties?
Yes. Halogen-free and low-smoke variants of panel trunking, ties and sleeving are available for rail, public buildings and other applications that require them.
Which cable management brands does LED Controls supply?
We supply Cembre, Partex, IMO, Eland, ABB, ILME, Rittal and other established manufacturers.
Do you offer trade accounts?
Yes. Trade accounts are available for panel builders, contractors, OEMs and industrial customers with competitive pricing and account management.
Do you provide technical support after purchase?
Yes. Our team can help with tooling compatibility, sizing and product selection before and after purchase.

Why Businesses Choose LED Controls

From single replacement components to complete cable management solutions, businesses across the UK trust LED Controls for expert advice, leading brands and dependable customer service. Our experienced team supports customers throughout every stage of their project, from specification through to delivery.

🏆
Industry Partnerships

As an ABB Value Provider and Danfoss Authorised Partner, we supply genuine products backed by manufacturer expertise and support.

⚙️
Technical Expertise

Our knowledgeable team can assist with product selection, application advice and identifying the most suitable cable management solution for your project.

🚚
Fast UK Delivery

Thousands of cable management products are available for fast dispatch, helping minimise downtime and keep your projects moving.

🏭
Trusted by Industry

We support OEMs, panel builders, machine manufacturers, system integrators and maintenance engineers across a wide range of industrial sectors.

Need Help Specifying Terminations or Containment?

From ferrule sizing and crimp tooling to marking systems and panel trunking, our technical team can help you put together a complete wiring kit for your panel or machine.

● latest blog

Factory Automation
Insights