Why Choose the Partex ECHS216CLEAR 2:1 Clear Heat Shrink Tubing?
The Partex ECHS216CLEAR is a versatile and reliable 2:1 clear heat shrink tubing designed to provide electrical insulation, cable protection and a neat finish for wiring and electrical connections. Manufactured by Partex, this heat shrink sleeving is suitable for electrical installation, industrial automation, control panel wiring, electronics and cable assembly applications.
Featuring an initial internal diameter of 1.6 mm and a recovered internal diameter of approximately 0.8 mm, the ECHS216CLEAR provides a 2:1 shrink ratio, allowing the tubing to contract around appropriately sized wires and components when heated. Its transparent finish enables visual inspection of the covered area and allows underlying cable identification or markings to remain visible where appropriate.
Supplied in a generous 150 m pack, the Partex ECHS216CLEAR is particularly suitable for high-volume cable preparation, electrical assembly and industrial production environments. Its compact diameter makes it ideal for insulating small conductors, protecting soldered connections and providing a professional finish to electrical wiring.
Key Advantages
- Versatile 2:1 heat shrink tubing for electrical insulation and cable protection.
- 1.6 mm initial internal diameter suitable for small wires and electrical connections.
- 0.8 mm recovered internal diameter for a close-fitting finish on compatible components.
- Clear, transparent construction allows visual inspection of covered wiring and connections.
- Heat-activated shrinking provides a neat and secure fit around appropriately sized conductors.
- Helps protect wiring against abrasion, handling damage and mechanical wear.
- Suitable for electrical insulation, wire identification protection and cable assembly.
- Can be cut to the required length for individual wiring and connection applications.
- Useful for control panel manufacturing, electronics assembly and industrial maintenance.
- Supplied in a cost-effective 150 m pack for professional and high-volume applications.
Key Features
- Partex ECHS216CLEAR clear heat shrink tubing.
- 2:1 shrink ratio for controlled diameter reduction when heated.
- 1.6 mm nominal supplied internal diameter.
- 0.8 mm nominal recovered internal diameter.
- Transparent finish for visibility of underlying conductors and markings.
- Heat-shrinkable construction for close-fitting electrical sleeving.
- Suitable for protecting small electrical conductors and connections.
- Provides an additional insulating layer over appropriately prepared electrical assemblies.
- Flexible sleeving format for cable preparation and wiring applications.
- Can be cut into individual lengths to suit installation requirements.
- Suitable for industrial, commercial and electronic wiring applications.
- Supplied in a 150 m pack.
Reliable Electrical Insulation and Cable Protection
Heat shrink tubing is widely used in electrical engineering and industrial automation to provide an insulating and protective covering around wires, electrical joints and small components. When heated using a suitable controlled heat source, the tubing contracts in diameter to fit around the underlying conductor or assembly. This creates a neat covering that helps reduce exposure to abrasion and mechanical handling damage.
The Partex ECHS216CLEAR 2:1 heat shrink tubing has a nominal internal diameter of 1.6 mm before shrinking and a nominal recovered internal diameter of 0.8 mm. This makes it particularly useful for smaller electrical wires, soldered joints and electronic connections. The transparent finish allows the underlying wiring or identification markings to remain visible, making it suitable for applications where inspection and identification are important.
For reliable results, the tubing should be selected with sufficient initial diameter to pass over the largest part of the assembly and an appropriate recovered diameter to grip the intended component. Heat should be applied evenly using suitable equipment, avoiding excessive temperatures that could damage the tubing or underlying insulation. Standard heat shrink tubing should not be assumed to provide a waterproof seal unless an appropriate sealing construction is specified.
Typical Applications
- Electrical wire insulation and protection.
- Small-diameter cable sleeving and wiring assemblies.
- Protection of soldered electrical connections.
- Industrial control panel wiring and assembly.
- Electronic equipment manufacturing and repairs.
- Protection of cable identification markings.
- Automation equipment and instrumentation wiring.
- OEM cable harness and wiring loom production.
- Electrical maintenance and repair applications.
- High-volume cable preparation and production assembly.
