Why Choose the Partex ECHS2191GREEN 2:1 Green Heat Shrink Tubing?
The Partex ECHS2191GREEN is a versatile 2:1 green heat shrink tubing designed for electrical insulation, cable protection and colour-coded identification in industrial and commercial electrical installations. Part of the Partex ECHS heat shrink tubing range, this sleeving provides a practical solution for protecting electrical conductors, covering cable connections and achieving a neat, professional finish on wiring assemblies, cable harnesses and electrical equipment.
Featuring a nominal supplied internal diameter of 19.1 mm and a nominal fully recovered internal diameter of 9.5 mm, the ECHS2191GREEN offers an approximately 2:1 shrink ratio. When suitable heat is applied, the tubing contracts around appropriately sized cables and components, creating a close-fitting protective covering that helps reduce abrasion, mechanical wear and damage caused by routine handling. Its larger diameter makes it particularly useful for sleeving compatible cable bundles, insulated connections and wiring assemblies.
The distinctive green finish supports visible cable identification and organised wiring systems where green is an appropriate designated colour. Supplied in a convenient 50 m pack, the ECHS2191GREEN is suitable for electrical contractors, control panel manufacturers, industrial maintenance engineers and OEM equipment builders requiring practical heat shrink sleeving for cable preparation, electrical assembly and maintenance applications.
Key Advantages
- Versatile 2:1 heat shrink tubing for electrical insulation and cable protection.
- 19.1 mm nominal supplied internal diameter accommodates appropriately sized cables, insulated connections and wiring assemblies.
- 9.5 mm nominal recovered internal diameter enables a close-fitting finish on compatible cables and components.
- Green colour provides clear visual identification for designated cable groups and wiring systems.
- Heat-activated shrinking allows the tubing to conform around suitable electrical cables and connections.
- Helps protect electrical wiring against abrasion, handling damage and mechanical wear.
- Suitable for electrical insulation, cable sleeving and colour-coded cable identification.
- Useful for covering larger cable sections and compatible cable harness assemblies.
- Can be cut to the required length for individual cable protection and identification applications.
- Supports tidy, professional wiring installations in control panels, machinery and electrical equipment.
- Convenient 50 m pack supports professional electrical installation, maintenance and production work.
Key Features
- Partex ECHS2191GREEN green heat shrink tubing.
- 2:1 nominal shrink ratio for controlled diameter reduction when heated.
- 19.1 mm nominal supplied internal diameter.
- 9.5 mm nominal fully recovered internal diameter.
- Green finish for visible cable identification and organised wiring installations.
- Heat-shrinkable construction for close-fitting cable and conductor sleeving.
- Suitable for protecting compatible electrical cables, insulated joints and connections.
- Provides an additional insulating and protective covering around appropriately prepared electrical assemblies.
- Useful for larger cable sections, cable bundles and wiring harness applications.
- Cut-to-length format for flexible installation and cable preparation.
- Suitable for colour-coded identification where permitted by applicable wiring conventions.
- Supplied in a 50 m pack.
Reliable Electrical Insulation and Cable Protection for Industrial Wiring
Heat shrink tubing is widely used in electrical engineering, industrial automation and control panel manufacturing to provide an insulating and protective covering around cables, electrical connections and wiring assemblies. When heated using a suitable controlled heat source, the tubing contracts in diameter to fit around the underlying cable or component. This creates a neat protective sleeve that helps reduce exposure to abrasion, handling damage and mechanical wear while supporting professional cable management.
The Partex ECHS2191GREEN 2:1 green heat shrink tubing has a nominal internal diameter of 19.1 mm before shrinking and a nominal fully recovered diameter of 9.5 mm. These dimensions make it suitable for appropriately sized electrical cables, insulated joints, cable bundles and wiring assemblies. The green finish provides a consistent appearance and can support designated cable identification schemes in industrial equipment, machinery and electrical control systems.
For dependable results, the tubing should have sufficient initial diameter to pass over the largest part of the assembly and an appropriate recovered diameter to achieve the required fit. Apply heat evenly using suitable equipment and avoid excessive temperatures that could damage the tubing or underlying insulation. Green-only sleeving must not be used as a substitute for green/yellow protective conductor identification in installations where green/yellow marking is required. Colour selection must follow applicable electrical wiring standards, and standard heat shrink tubing should not be assumed to provide a waterproof seal unless a suitable sealing construction is specified.
Typical Applications
- Electrical cable insulation and protection.
- Protective sleeving for appropriately sized cable bundles.
- Covering suitable insulated electrical connections.
- Industrial control panel wiring and assembly.
- Colour-coded cable and wiring harness identification.
- Electrical equipment manufacturing and assembly.
- Industrial automation and machinery wiring.
- OEM cable harness and wiring loom production.
- Protection of cable sections exposed to routine handling.
- Electrical maintenance, repairs and refurbishment work.
- Professional cable preparation and production assembly.
- Identification of designated cable groups where green is an appropriate marking colour.
