Why Choose the Partex HSKIT16.4 2:1 Heat Shrink Tubing Kit?
The Partex HSKIT16.4 is a practical 2:1 heat shrink tubing kit designed for electrical insulation, cable protection, wiring identification and professional cable management. Manufactured by Partex, this heat shrink sleeving provides a convenient solution for protecting insulated conductors, cable connections and wiring assemblies in industrial automation systems, electrical control panels and general electrical installations.
Featuring a 2:1 shrink ratio, the tubing contracts to approximately half its original internal diameter when heated appropriately. With a supplied internal diameter of 6.4 mm and a nominal recovered diameter of 3.2 mm, it is suitable for compatible small to medium-diameter insulated wires, electrical connections and cable assemblies requiring a neat, close-fitting protective sleeve.
Supplied in a convenient kit format, the Partex HSKIT16.4 offers a practical solution for electricians, control panel builders, OEM manufacturers and industrial maintenance engineers. The tubing can be cut to the required length and installed using controlled heat, making it useful for electrical assembly, cable protection, equipment manufacturing and routine maintenance applications.
Key Advantages
- 2:1 heat shrink ratio provides a close-fitting protective sleeve when correctly installed.
- 6.4 mm supplied internal diameter accommodates compatible insulated wires, cable connections and wiring assemblies.
- 3.2 mm nominal recovered diameter allows effective shrinking around appropriately sized conductors.
- Convenient kit format provides a practical solution for electrical installation, assembly and maintenance tasks.
- Heat-activated installation enables the tubing to contract around compatible cables and components.
- Helps protect covered wiring against abrasion, handling damage and general mechanical wear.
- Can be cut to application-specific lengths for flexible cable insulation and protection.
Key Features
- Partex HSKIT16.4 heat shrink tubing kit.
- 2:1 nominal shrink ratio.
- 6.4 mm nominal internal diameter before shrinking.
- 3.2 mm nominal recovered internal diameter.
- Kit packaging for convenient electrical installation and maintenance use.
- Heat-activated shrinking for a close-fitting protective sleeve.
- Suitable for electrical insulation, cable protection and wiring organisation.
- Can be cut to the required length for individual applications.
- Suitable for compatible wiring in control panels, industrial machinery and electrical equipment.
Reliable Electrical Insulation and Versatile Cable Protection
The Partex HSKIT16.4 heat shrink tubing provides a convenient method of insulating and protecting compatible electrical wiring. When suitable heat is applied, the tubing contracts around the insulated wire or component, creating a close-fitting sleeve that helps protect against abrasion and handling damage. Its 2:1 shrink ratio allows the tubing to recover from a nominal supplied internal diameter of 6.4 mm to approximately 3.2 mm.
This size is particularly useful for compatible insulated conductors, cable joints and wiring assemblies found in electrical control panels, automation equipment and industrial machinery. The 6.4 mm supplied diameter provides room for fitting over appropriately sized cables and components, while the 3.2 mm nominal recovered diameter enables the tubing to contract around the finished assembly. Correct sizing is important to ensure the tubing passes over the application before shrinking and achieves an effective fit afterwards.
The kit format makes the HSKIT16.4 a practical choice for installation, assembly and maintenance work where heat shrink tubing is required for individual cable protection tasks. The tubing can be cut to the appropriate length and positioned before applying controlled heat. Its suitability for a particular electrical application should be confirmed against the manufacturer's technical specifications, including any required electrical and environmental performance ratings.
How to Install Partex HSKIT16.4 Heat Shrink Tubing
- Select the correct size: Confirm that the 6.4 mm supplied internal diameter will pass over the cable or component and that the 3.2 mm nominal recovered diameter is suitable for the finished assembly.
- Cut to length: Prepare a section of tubing long enough to cover the intended area, allowing for any longitudinal shrinkage specified by the manufacturer.
- Position the tubing: Slide the tubing over the insulated wire, connection or component before completing any assembly that would prevent it from being fitted.
- Apply controlled heat: Use an appropriate heat source to shrink the tubing evenly around the application.
- Inspect the finished sleeve: Allow the tubing to cool and check that it has formed a close, even fit without damaging the underlying insulation.
Important: Follow the manufacturer's installation guidance and avoid excessive heat. Standard heat shrink tubing should not be assumed to provide a watertight seal unless the relevant product specification confirms that capability.
Typical Applications
- Electrical wire insulation and protection.
- Industrial control panel wiring and assembly.
- PLC and automation equipment cable management.
- Protection of compatible insulated conductors and cable connections.
- Electrical wiring repairs and maintenance.
- Cable harness assembly and wiring organisation.
- OEM machinery wiring and electrical equipment manufacturing.
- Routine electrical installation and cable protection tasks.
