Why Choose the ABB PDLG1842 IP65 Glass Door – 12 DIN, 1800 mm x 600 mm?
The ABB PDLG1842 IP65 Glass Door (1STQ007304A0000) is a dedicated enclosure door accessory for compatible ABB System Pro E Power low-voltage switchgear assemblies. Identified by the manufacturer's description IP65 GL.DOOR 12 DIN H=1800MM W=600MM, this product is specified for an enclosure arrangement with a nominal height of 1800 mm, a nominal width of 600 mm and a 12 DIN configuration designation.
Designed for use within the ABB System Pro E Power range, the PDLG1842 provides a manufacturer-identified glass door solution for compatible electrical distribution switchboards. A glass door arrangement can provide visibility into designated areas of an electrical enclosure while forming part of the cabinet's protective outer construction.
The manufacturer's IP65 designation identifies the enclosure protection configuration for which this door is intended. IP65 is associated with dust-tight construction and protection against water jets under the applicable test conditions. The completed switchgear assembly must incorporate the correct frame, door seals, closing arrangements and associated components to achieve its declared ingress protection rating.
The 12 DIN designation is an important configuration identifier within the manufacturer's product description. It should be matched to the appropriate System Pro E Power enclosure layout rather than interpreted as confirmation of the number of DIN-rail modules, rows or devices without reference to ABB's technical documentation.
With product reference PDLG1842 and ABB order code 1STQ007304A0000, this glass door accessory supports accurate selection for new switchboard construction, enclosure refurbishment and manufacturer-approved replacement projects. Its specified dimensions and protection configuration make correct compatibility checks essential before ordering or installation.
Key Advantages
- Purpose-designed ABB System Pro E Power glass door accessory for compatible low-voltage switchgear enclosures.
- Specified for IP65 enclosure protection configurations.
- Glass door construction supports visibility into the designated enclosure area.
- Manufacturer-specified nominal height of 1800 mm.
- Designed for a nominal enclosure width of 600 mm.
- Identified by the 12 DIN configuration designation.
- Supports the intended front enclosure arrangement of compatible switchboards.
- Helps panel builders select a door matching the required cabinet geometry.
- Provides a manufacturer-specific alternative to other door configurations where specified by the enclosure design.
- Suitable for professional electrical distribution panel manufacturing and assembly.
- Useful for approved switchgear maintenance, refurbishment and door replacement.
- Clearly identified by ABB order code 1STQ007304A0000.
- Part of the established ABB System Pro E Power low-voltage switchgear enclosure range.
Key Features
- Manufacturer: ABB.
- Product reference: PDLG1842.
- ABB order code: 1STQ007304A0000.
- Manufacturer description: IP65 GL.DOOR 12 DIN H=1800MM W=600MM.
- Product group: System Pro E Power.
- Component type: Glass enclosure door.
- Designated protection configuration: IP65.
- Door configuration: Glass door.
- Manufacturer configuration designation: 12 DIN.
- Nominal height: 1800 mm.
- Nominal width: 600 mm.
- Intended for compatible System Pro E Power enclosure arrangements.
- Supports the manufacturer's specified switchboard door configuration.
- Suitable for original enclosure construction and approved replacement applications.
- Requires confirmation of compatible hinges, locking arrangements, seals and associated mounting components.
Technical Specifications
- Manufacturer: ABB
- Product group: System Pro E Power
- Product reference: PDLG1842
- ABB order code: 1STQ007304A0000
- Product name: ABB PDLG1842 IP65 Glass Door – 12 DIN, 1800 mm x 600 mm
- Manufacturer description: IP65 GL.DOOR 12 DIN H=1800MM W=600MM
- Product type: Glass enclosure door
- Accessory category: Low-voltage switchgear enclosure door accessories
- Product family: System Pro E Power
- Designated IP configuration: IP65
- Door type: Glass door
- Configuration designation: 12 DIN
- Nominal enclosure height: 1800 mm
- Nominal enclosure width: 600 mm
- Primary function: Providing a glass door arrangement for a compatible switchgear enclosure
- Associated equipment: ABB System Pro E Power low-voltage switchgear enclosures
- Equipment compatibility: System Pro E Power configurations specifying PDLG1842
- Mounting arrangement: According to the applicable ABB enclosure assembly instructions
- Product classification: Switchgear enclosure glass door accessory
- Application: Low-voltage electrical distribution switchboard construction, maintenance and refurbishment
IP65 Glass Doors in ABB System Pro E Power Switchgear Enclosures
The ABB System Pro E Power range provides modular enclosure solutions for constructing low-voltage electrical distribution switchboards. These assemblies may incorporate structural frames, doors, side panels, internal mounting systems, busbar arrangements and protective equipment selected according to the requirements of the completed electrical installation.
An enclosure door forms part of the outer construction of an electrical switchboard. Its selection must account for the cabinet dimensions, opening arrangement, mechanical interfaces, required access provisions and specified protection configuration. A correctly selected door must be compatible with the associated frame and enclosure components.
The ABB PDLG1842 is identified as a glass door. Glass door arrangements can allow visual inspection of designated internal areas without requiring the door to be opened. However, the extent of visibility depends on the actual glazing area, the internal switchboard layout and any components positioned behind the door.
The manufacturer's description specifies IP65. Under the ingress protection classification system defined by BS EN 60529, the first digit 6 indicates protection against dust ingress, while the second digit 5 indicates protection against water jets under the applicable test conditions.
Although the PDLG1842 is designated for an IP65 enclosure configuration, the door does not independently establish the ingress protection rating of the complete switchboard. The final protection level depends on the complete enclosure arrangement, including the door-to-frame interface, sealing system, hinges, closing mechanism, adjoining panels and any cable-entry openings.
The manufacturer's H=1800MM designation identifies a nominal height of 1800 mm, while W=600MM identifies a nominal width of 600 mm. These measurements are important for selecting the appropriate door configuration. They should not automatically be treated as the exact external dimensions of the door leaf, glass area or mounting frame.
The 12 DIN designation forms part of the ABB product description and should be retained when identifying the correct accessory. Although DIN terminology is widely used in electrical distribution equipment, the exact meaning of this designation in the PDLG1842 configuration must be confirmed using ABB's System Pro E Power catalogue and technical drawings.
Door compatibility involves more than matching nominal height and width. The correct arrangement may depend on the enclosure frame, hinge position, opening direction, locking system, seals and internal equipment clearances. The PDLG1842 should therefore be selected using the complete manufacturer-specified assembly configuration.
The supplied product description does not establish the exact glass composition, glazing thickness, frame material, surface finish, hinge arrangement, lock type or package contents. These characteristics should be verified using the applicable ABB technical and supply documentation rather than assumed from the product designation.
Low-voltage switchgear and controlgear assemblies may be designed and verified in accordance with BS EN IEC 61439. Relevant considerations include mechanical operation, accessibility, protection against electric shock, enclosure integrity and the requirements of the completed electrical assembly. Installing a compatible glass door is one element of the overall verified switchgear construction.
For new installations or replacement work, confirm the PDLG1842 product reference, ABB order code 1STQ007304A0000, IP65 designation, 12 DIN configuration, nominal 1800 mm height and 600 mm width against the relevant ABB System Pro E Power assembly drawings and parts list.
Typical Applications
- ABB System Pro E Power low-voltage switchgear enclosures.
- Compatible switchboard configurations specifying an IP65 glass door.
- Electrical enclosures with a nominal height of 1800 mm.
- Electrical enclosures with a nominal width of 600 mm.
- System Pro E Power arrangements identified by the 12 DIN designation.
- Industrial low-voltage electrical distribution switchboards.
- Commercial building electrical distribution panels.
- Main electrical distribution switchgear assemblies.
- Sub-distribution switchboard enclosures.
- Electrical panel manufacturing and enclosure assembly.
- System Pro E Power switchgear refurbishment projects.
- Manufacturer-approved glass door replacement and maintenance.
