Why Choose the ABB PRVS3041 Vertical Rear Segregation Panel for System Pro E Power Switchboards?
The ABB PRVS3041 (1STQ008768A0000) is a purpose-designed vertical rear segregation component from the ABB System Pro E Power modular low-voltage switchboard range. Specified with a nominal height of 300 mm and width of 400 mm, this accessory is intended for compatible internal switchboard segregation arrangements requiring a rear-positioned vertical separation component.
Developed for professional electrical panel builders, switchgear manufacturers and industrial power distribution system integrators, the ABB PRVS3041 supports the organised construction of compartmentalised electrical distribution assemblies. Its vertical rear configuration provides a dedicated segregation element for the corresponding switchboard position, helping establish physical boundaries between designated internal areas when correctly installed with compatible components.
The PRVS3041 is identified by the manufacturer description SEGR.VERT.REAR H=300MM W=400MM INT.UP., specifying a vertical rear segregation arrangement with an INT.UP. configuration designation. This designation should be matched to the relevant ABB System Pro E Power assembly documentation to ensure the component is selected for the correct internal arrangement. The accessory forms part of a wider segregation system rather than a complete standalone compartment assembly.
Key Advantages
- Dedicated vertical rear segregation: Designed for compatible internal separation arrangements within ABB System Pro E Power switchboards.
- 300 mm nominal height: Matches the specified vertical rear segregation component height.
- 400 mm nominal width: Supports selection for the corresponding switchboard segregation configuration.
- Rear-positioned arrangement: Intended for designated rear segregation locations within compatible assemblies.
- INT.UP. configuration: Identifies the manufacturer's specified internal arrangement for accurate component selection.
- Modular system compatibility: Designed for integration with appropriate ABB System Pro E Power enclosure and segregation accessories.
- Physical separation support: Contributes to compartment boundaries when installed as part of the complete segregation system.
- Organised internal construction: Helps panel builders coordinate segregation components within modular switchboard layouts.
- Application-specific dimensions: Provides a defined component size for the intended assembly position.
- Professional switchboard integration: Suitable for industrial and commercial low-voltage electrical distribution projects.
Key Features
- Original ABB System Pro E Power modular switchboard accessory.
- PRVS3041 manufacturer product designation.
- ABB order code: 1STQ008768A0000.
- Vertical rear segregation configuration.
- Designed for compatible internal switchboard compartmentalisation arrangements.
- 300 mm nominal height.
- 400 mm nominal width.
- Rear segregation position identified in the manufacturer specification.
- INT.UP. manufacturer configuration designation.
- Supports physical separation between designated internal switchboard areas.
- Intended for coordinated installation with compatible ABB segregation and mounting components.
- Suitable for professional electrical panel building and switchgear manufacturing.
Technical Specifications
- Manufacturer: ABB
- Product range: System Pro E Power
- Product designation: PRVS3041
- ABB order code: 1STQ008768A0000
- Manufacturer description: SEGR.VERT.REAR H=300MM W=400MM INT.UP.
- Product type: Vertical rear segregation component
- Segregation orientation: Vertical
- Segregation position: Rear
- Nominal height: 300 mm
- Nominal width: 400 mm
- Nominal dimensions (H × W): 300 × 400 mm
- Manufacturer configuration designation: INT.UP.
- Intended function: Internal switchboard segregation
- Compatible enclosure system: ABB System Pro E Power
- Installation application: Rear vertical segregation within compatible switchboard assemblies
- Equipment category: Low-voltage electrical switchboard enclosure accessories
- Accessory classification: Internal segregation component
Reliable Vertical Rear Segregation and Modular Switchboard Integration
The ABB PRVS3041 vertical rear segregation component is intended for use in compatible System Pro E Power electrical distribution switchboards where a defined internal separation arrangement is required. Internal segregation components help establish physical boundaries between designated sections of an electrical assembly, supporting an organised layout for equipment, conductors and associated electrical connections.
The vertical rear configuration identifies the component's intended orientation and position within the switchboard. This distinguishes the PRVS3041 from horizontal segregation components, front-positioned partitions and other internal enclosure accessories. Selecting the correct orientation and position is important when coordinating the segregation arrangement with adjacent components and the overall enclosure structure.
With a nominal height of 300 mm and width of 400 mm, the PRVS3041 provides a defined dimensional configuration for the corresponding rear segregation position. These dimensions should be considered alongside the selected switchboard compartment layout, supporting structure and associated segregation accessories. The specified measurements identify the component configuration and should not be interpreted as the overall dimensions of the completed switchboard.
The manufacturer's INT.UP. designation is an important part of the product specification. It identifies the intended ABB configuration and should be checked against the relevant System Pro E Power assembly drawings and installation instructions. The abbreviation alone does not establish the complete installation arrangement or confirm the inclusion of additional fixing components.
Internal separation within low-voltage switchgear assemblies may be designed to meet particular requirements under IEC/EN 61439. However, the PRVS3041 does not independently establish a specific form of separation, such as Form 2, Form 3 or Form 4. The achieved segregation classification depends on the complete assembly, including all partitions, barriers, equipment positions, cable connections and installation details.
The PRVS3041 is a mechanical switchboard segregation accessory rather than an electrical protective device. It does not independently provide overload protection, short-circuit protection or an ingress protection rating. Its intended function depends on correct integration with compatible ABB System Pro E Power components and the overall switchboard design.
Typical Applications
- ABB System Pro E Power modular low-voltage switchboards.
- Vertical rear segregation within compatible electrical distribution assemblies.
- Industrial main and sub-distribution switchboards.
- Commercial building electrical distribution systems.
- Modular switchgear assemblies requiring internal compartment separation.
- Compatible rear segregation positions requiring a 300 mm high component.
- Switchboard segregation arrangements specified for a 400 mm width.
- Electrical distribution assemblies incorporating dedicated internal partitions.
- System Pro E Power configurations requiring the manufacturer's INT.UP. designation.
- OEM switchgear manufacturing and professional electrical panel building.
- Construction and refurbishment of compatible ABB switchboard segregation systems.
