Why Choose the nVent HOFFMAN F44LE9KOKT 90° Counterclockwise Elbow?
The nVent HOFFMAN F44LE9KOKT is a 90-degree counterclockwise transposition elbow designed for use with 4 × 4 in (102 × 102 mm) NEMA Type 12 lay-in wireway. It enables the direction and orientation of a wireway installation to be changed while retaining the convenient lay-in cable-routing feature.
Part of the nVent HOFFMAN lay-in hinged-cover wireway system, this fitting is particularly useful where the open side of a wireway run must be rotated by 90 degrees counterclockwise. Its purpose-designed geometry allows conductors to remain accessible during installation and maintenance rather than requiring them to be pulled through a conventional closed elbow.
Manufactured from steel with a grey protective finish, the F44LE9KOKT is designed for NEMA Type 12 wireway installations and provides an IP54 enclosure rating when correctly assembled as part of the appropriate system. The fitting has a nominal wireway cross-section of 102 × 102 mm and a specified elbow height dimension of 127 mm.
Key Advantages
- Purpose-designed 90° counterclockwise elbow for lay-in wireway systems.
- Allows the open side of the wireway run to be rotated by 90 degrees.
- Retains the convenient lay-in cable installation feature through the change in direction.
- Designed for 4 × 4 in (102 × 102 mm) wireway.
- Robust steel construction for industrial electrical installations.
- Suitable for NEMA Type 12 / IP54 wireway systems.
- Hinged-cover configuration supports convenient conductor access.
- Supplied with a sealing plate, gasket and joining screws for system assembly.
Key Features
- nVent HOFFMAN F44LE9KOKT transposition elbow.
- 90° bend angle.
- Counterclockwise orientation.
- Designed for lay-in hinged-cover wireway.
- 102 × 102 mm nominal wireway cross-section.
- 127 mm specified elbow height dimension.
- Steel construction.
- Grey finish.
- NEMA Type 12 enclosure system compatibility.
- IP54 protection when correctly installed as part of the appropriate wireway system.
- Flat sealing plate arrangement.
- Maintains conductor accessibility through the elbow.
Reliable Cable Routing for Industrial Wireway Systems
Lay-in wireway provides an efficient method of routing and protecting electrical conductors while retaining convenient access along the cable path. When a wireway route changes direction, correctly matched fittings are important for maintaining conductor accessibility and the environmental protection provided by the assembled system.
The nVent HOFFMAN F44LE9KOKT is specifically designed to rotate the open side of a 102 × 102 mm wireway through a 90° counterclockwise transition while preserving its lay-in functionality. This makes it a practical fitting for complex industrial cable-routing layouts where conventional straight wireway sections cannot provide the required route.
Typical Applications
- Industrial electrical wireway systems.
- Control panel and switchgear installations.
- Machine building and OEM equipment.
- Factory automation cable distribution.
- Power and control conductor routing.
- Manufacturing and process control installations.
- NEMA Type 12 lay-in wireway systems.
- Wireway routes requiring a 90° counterclockwise transition.
