Why Choose the Lovato 11BGP0901A02460 BGP09 Minicontactor?
The Lovato 11BGP0901A02460 is a compact three-pole power minicontactor with rear PCB solder pins designed for reliable motor and load switching in industrial automation, machinery and OEM electronic assemblies. Part of the Lovato BGP09 series, it combines three normally open main power contacts with an integrated normally closed auxiliary contact in a compact contactor format.
The contactor provides an AC-3 operational current of 9 A at up to 440 V and supports three-phase motor loads up to 4 kW at 400 V AC. Its conventional free-air thermal current is 20 A, while the integrated 1NC auxiliary contact provides a convenient interface for signalling, interlocking and control functions.
This specific 11BGP0901A02460 version uses a 24 V AC, 60 Hz control coil and rear PCB solder-pin connections for direct integration with printed circuit board assemblies. With a rated insulation voltage of 500 V and compact BGP09 construction, it is particularly well suited to OEM machinery and control equipment where efficient PCB integration and dependable contactor switching are required.
Key Advantages
- Compact three-pole BGP09 power minicontactor for industrial and OEM applications.
- 9 A AC-3 operational current for reliable motor switching.
- Rated for 4 kW motor loads at 400 V AC in AC-3 duty.
- Dedicated 24 V AC, 60 Hz control coil.
- Integrated 1NC auxiliary contact for signalling and interlocking.
- Rear PCB solder pins simplify integration into printed circuit board assemblies.
- 20 A AC-1 operational current for general-purpose electrical loads.
- Compact construction helps minimise space requirements in OEM control equipment.
Key Features
- Lovato BGP09 series power minicontactor.
- 3-pole configuration with three normally open main contacts.
- Integrated 1NC auxiliary contact.
- 9 A AC-3 operational current at up to 440 V.
- 4 A AC-4 operational current at 400 V.
- 4 kW AC-3 motor rating at 400 V.
- 20 A conventional free-air thermal current at up to 40 °C.
- 24 V AC, 60 Hz coil.
- Rear PCB solder-pin connection.
- 500 V rated insulation voltage.
- 6 kV rated impulse withstand voltage.
- Suitable for compact industrial and OEM control assemblies.
Reliable PCB-Integrated Motor Control and Automation
Minicontactors such as the Lovato BGP09 provide electromagnetic switching between low-power control circuitry and higher-power motor or load circuits. Energising the contactor coil closes the three normally open main contacts, allowing automated control systems to switch three-phase loads without carrying the full load current through the electronic control circuitry.
The BGP09 configuration is particularly suited to OEM equipment requiring direct printed circuit board integration. Rear solder pins allow the contactor to interface directly with a PCB, while the integrated 1NC auxiliary contact can be used for signalling, electrical interlocking and control feedback within machinery and automation systems.
Typical Applications
- PCB-integrated motor control assemblies.
- Industrial machinery and automation equipment.
- OEM electronic control systems.
- Pumps, fans and ventilation equipment.
- Conveyors and material handling machinery.
- Packaging and production equipment.
- HVAC and building control systems.
- Compact motor starters and automated control assemblies.
