Why Choose the Finder 22.34.0.024.1640 Modular Contactor?
The Finder 22.34.0.024.1640 is a compact and reliable four-pole modular contactor designed for controlling electrical loads in residential, commercial and industrial installations. Its two normally open and two normally closed contacts provide flexible switching for lighting, heating, motor and automation circuits.
As part of the Finder Series 22 modular contactor range, this model combines a silent AC/DC coil with DIN-rail mounting and a compact 35 mm-wide enclosure. An integrated LED and mechanical position indicator provide clear visual confirmation of the contactor’s operating state.
The contactor has a 25 A rated current, a 24 V AC/DC control coil and a three-position AUTO-ON-OFF selector. This allows automatic coil-controlled operation, manual activation for testing or maintenance, and forced disconnection when the connected circuit must remain switched off.
Key Advantages
- Compact four-pole modular contactor for installation applications.
- 25 A contact rating for lighting, heating and motor loads.
- 24 V AC/DC silent coil simplifies control-circuit selection.
- AUTO-ON-OFF selector supports automatic and manual control.
- Integrated LED and mechanical indicator provide clear status feedback.
- 35 mm-wide DIN-rail format conserves distribution-board space.
Key Features
- Finder Series 22 modular contactor.
- Four-pole contact configuration.
- 2 NO + 2 NC power contacts.
- 25 A rated operational current.
- 24 V AC, 50/60 Hz, or 24 V DC coil.
- Three-position AUTO-ON-OFF manual selector.
- Integrated LED and mechanical contact-position indicator.
- DIN-rail mounting with IP20 terminal protection.
Reliable Load Control for Electrical Installations
Modular contactors allow lighting, heating, motors and other electrical loads to be controlled remotely through a low-power control circuit. The Finder 22.34 responds to its 24 V AC/DC coil while its four main contacts switch the connected power circuits.
The integrated selector provides additional control during commissioning and maintenance. In AUTO mode the contacts follow the coil supply, ON manually holds the contactor in its operated state, and OFF prevents coil energisation so the contacts remain in their normal state.
Typical Applications
- Lighting control systems.
- Electric heating installations.
- Pump, fan and small motor switching.
- Building automation systems.
- Distribution boards and control panels.
- Residential, commercial and industrial load control.
