Finder 39.01.0.024.0060 is a 6.2 mm MasterBASIC electromechanical relay interface module with a 24 V AC/DC input, one 6 A changeover contact and push-in terminals.
Why Choose the Finder 39.01.0.024.0060 MasterBASIC Relay Interface Module?
The Finder 39.01.0.024.0060 is a slim and dependable electromechanical relay interface module designed to isolate and interface electronic controllers with industrial field equipment. As part of the Finder Series 39 MasterINTERFACE range, this MasterBASIC module provides reliable switching for PLC, automation and general control-panel applications.
The module incorporates coil-status indication and a protection circuit to simplify commissioning and operational monitoring. Its replaceable electromechanical relay is secured by a plastic retaining and release clip, while optional jumper links permit common connection of the A1, A2 and 11 terminals across multiple modules.
With a 24 V AC/DC input and one changeover contact rated at 6 A and 250 V AC, the 39.01.0.024.0060 is suitable for controlling compatible contactors, solenoid valves, indicators and other electrical loads. Its push-in terminals and compact 6.2 mm width support rapid wiring and efficient use of control-panel space.
Key Advantages
Slim electromechanical relay interface module for PLC systems.
6 A changeover contact supports flexible load switching.
24 V AC/DC input suitable for common industrial control circuits.
Integral coil-status indication and protection circuit.
Push-in terminals enable quick and secure conductor installation.
Replaceable relay simplifies servicing and maintenance.
Key Features
Finder Series 39 MasterINTERFACE MasterBASIC.
Single changeover contact.
6 A nominal contact current.
24 V AC/DC nominal input voltage.
AgNi contact material.
Optional jumper links for common terminal connections.
Space-saving 6.2 mm-wide housing.
Direct mounting on a 35 mm DIN rail.
Reliable Electromechanical Interfacing for Automation Systems
Electromechanical relay interface modules enable low-voltage controllers to switch and isolate compatible AC or DC field loads. A changeover contact provides normally open and normally closed switching paths, supporting a broad range of industrial control functions.
The Finder Series 39 MasterBASIC range is designed for general interface applications between auxiliary contacts, sensors, PLCs, controllers, relays and solenoids. Its slim construction, push-in wiring and jumper-link compatibility support efficient installation within modern automation panels.
Typical Applications
PLC input and output interfaces.
Industrial automation control panels.
Packaging and labelling machinery.
Material-handling and warehouse systems.
Solenoid valve and contactor control.
Electrical distribution and process-control panels.
Technical Specifications
Tick the specs you need, then view products that match.
Terminal Type
Push-in
Load Voltage
400 V AC
Mounting Type
DIN rail
Switching Current (A)
6 A
Manufacturer
Finder
Series
Series 39 MasterINTERFACE
Range
MasterBASIC
Model
39.01.0.024.0060
Product type
Electromechanical relay interface module
Contact configuration
1 changeover contact (SPDT)
Rated contact current
6 A
Maximum peak current
10 A
Rated switching voltage
250 V AC
Maximum switching voltage
400 V AC
Rated load AC1
1500 VA
Rated load AC15 at 230 V AC
300 VA
Single-phase motor rating at 230 V AC
0.185 kW
DC1 breaking capacity at 24 / 110 / 220 V
6 / 0.2 / 0.12 A
Minimum switching load
500 mW at 12 V / 10 mA
Contact material
AgNi
Nominal input voltage
24 V AC/DC
Input operating range
19.2–26.4 V AC/DC
Holding voltage
0.6 UN
Must drop-out voltage
0.1 UN
Mechanical life
10,000,000 cycles
Electrical life at rated AC1 load
60,000 cycles
Operate / release time
5 / 6 ms
Coil-to-contact impulse withstand voltage
6 kV
Dielectric strength between open contacts
1000 V AC
Ambient temperature
−40 to +70 °C
Protection rating
IP20
Terminal type
Push-in terminals
Mounting type
35 mm DIN rail mounting
Width
6.2 mm
Contacts
1 C/O
IP Rating
IP20
Frequently Asked Questions
What is the Finder 39.01.0.024.0060 used for?
This electromechanical relay interface module isolates and interfaces PLCs or electronic controllers with compatible industrial field loads.
What contact configuration does this module provide?
The module provides one changeover contact rated at 6 A and 250 V AC.
What input voltage does the module require?
The Finder 39.01.0.024.0060 has a nominal 24 V AC/DC input with an operating range of 19.2–26.4 V AC/DC.
What type of terminals does this module use?
This MasterBASIC module uses push-in terminals for quick and secure conductor installation.
How is the Finder 39.01.0.024.0060 installed?
The module mounts directly onto a standard 35 mm DIN rail and occupies 6.2 mm of panel width.
Trusted by Automation Professionals Worldwide
Finder Series 39 MasterINTERFACE modules are used by automation engineers and control-panel builders for compact, dependable interfacing between electronic control systems and industrial field equipment.
Terminal Type
Push-in
Load Voltage
400 V AC
Mounting Type
DIN rail
Switching Current (A)
6 A
Manufacturer
Finder
Series
Series 39 MasterINTERFACE
Range
MasterBASIC
Model
39.01.0.024.0060
Product type
Electromechanical relay interface module
Contact configuration
1 changeover contact (SPDT)
Rated contact current
6 A
Maximum peak current
10 A
Rated switching voltage
250 V AC
Maximum switching voltage
400 V AC
Rated load AC1
1500 VA
Rated load AC15 at 230 V AC
300 VA
Single-phase motor rating at 230 V AC
0.185 kW
DC1 breaking capacity at 24 / 110 / 220 V
6 / 0.2 / 0.12 A
Minimum switching load
500 mW at 12 V / 10 mA
Contact material
AgNi
Nominal input voltage
24 V AC/DC
Input operating range
19.2–26.4 V AC/DC
Holding voltage
0.6 UN
Must drop-out voltage
0.1 UN
Mechanical life
10,000,000 cycles
Electrical life at rated AC1 load
60,000 cycles
Operate / release time
5 / 6 ms
Coil-to-contact impulse withstand voltage
6 kV
Dielectric strength between open contacts
1000 V AC
Ambient temperature
−40 to +70 °C
Protection rating
IP20
Terminal type
Push-in terminals
Mounting type
35 mm DIN rail mounting
Width
6.2 mm
Contacts
1 C/O
IP Rating
IP20
No documents available for this product.
UK delivery
Delivery options
Free UK delivery on orders over £200 ex VAT. Order in-stock items before 2pm Monday to Friday for next-day delivery.
This productManufacturer Lead Time
Standard Manufacturer Lead Time 6-8 Weeks, Call For Express Delivery Options
Standard delivery
£8 ex VAT · free over £200
UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Collect from our showroom
Mon–Fri, 8am–5pm
Order and pay online, then collect from our showroom.
Please allow 15–30 minutes after ordering for us to prepare your order.
Northern Ireland, ROI & export
Priced at checkout
We deliver to Northern Ireland, the Republic of Ireland and overseas.
Delivery is calculated at checkout based on your destination.
Orders with mixed availability
Shipped complete
If part of your order is on a lead time, we hold it and send everything together.
Need the in-stock items sooner? Ask us and we can split the delivery.
Business customer returns
Returns & order support
Need to return an item? Find the guidance for your order below, then contact our team before sending anything back.
Stocked items
Request within 30 days
Changed your mind or ordered the wrong item? Request a return within 30 days of receipt. There is no restocking charge.
Items must be unused, in resalable condition and in their original packaging, and returns need our approval first. Return carriage is at your cost, and the original delivery charge is not refunded.
Faulty or damaged items
Tell us as soon as possible
Faulty, damaged on delivery or the wrong product supplied? Contact our team as soon as possible with the details.
We will review the issue and arrange an appropriate resolution under our terms and conditions and your statutory rights.
Made-to-order items
Manufacturer approval needed
Manufactured, configured and special-order products can only be returned with the manufacturer’s approval. Any handling charge is agreed with you when you request the return.
This does not affect claims for faulty goods or items that do not meet the agreed specification.
Let’s get your return sorted.
Send your order number, product details and reason for return. For faults or delivery damage, include photographs if available. We will confirm the next steps.
The 30-day return request period applies to change-of-mind returns for stocked items. It does not limit your statutory rights for faulty or non-conforming goods.
● Service Agreements
Credit Accounts
Our service agreements are built to support long term procurement relationships. By working closely with engineering teams and procurement departments, we help streamline purchasing processes while ensuring consistent access to critical components and sourcing support when it matters most.
Priority sourcing and supply support
Flexible payment terms for qualifying organisations
Support for engineering, maintenance, and operations
500 +
Stock lines ready to ship
1,000 +
Same day dispatches
3500 +
Customers supported
28
Trusted Manfacturers
● frequently asked questions
Common questions about our products and support
At Led Controls Ltd we help engineers source the right automation and control gear with confidence. below are quick answers to what we are asked most often.
What product ranges do you supply
We supply all leading manfacturers in our industry. we offer next day delivery on most poplour products.
Can you help specify the correct part?
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
Do you have stock for urgent orders?
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
What are your delivery times and costs?
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
What about warranties, returns and faulty items?
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
LED Controls is a specialist distributor of factory automation and industrial controls, supplying OEMs, machine builders, panel builders and end users throughout the UK and worldwide. As a trusted UK distributor for many of the world’s leading automation manufacturers, we provide industrial control products, technical expertise and bespoke automation solutions backed by outstanding customer service.
2025 has been a big year for LED Controls, and our blog has expanded accordingly. We've covered a wide range of topics across industrial control and factory automation this year. From core technology explainers and new product releases to panel building best practice...
