Why Choose the Finder 48.61.8.230.1060SPA Relay Interface Module?
The Finder 48.61.8.230.1060SPA is a compact 16 A electromechanical relay interface module designed for dependable electrical switching in industrial automation, PLC systems and electrical control panels. Part of the Finder 48 Series, this industrial interface relay combines a high-current plug-in relay with a DIN rail mounting socket, providing a convenient solution for switching electrical loads from a separate control circuit.
Featuring a 230 V AC operating coil and one changeover contact (1 CO / SPDT), the Finder 48.61.8.230.1060SPA enables a single control signal to switch between normally closed and normally open connections. Its 16 A rated contact current, 250 V AC rated contact voltage and 4000 VA AC1 switching capacity make it suitable for appropriately rated industrial and commercial electrical loads.
The module features a slim 15.8 mm housing width, box-clamp screw terminals and 35 mm DIN rail mounting. The 1060SPA configuration incorporates a supply indication and suppression arrangement, while the replaceable relay design simplifies maintenance. Its combination of compact dimensions, high-current switching capability and convenient installation makes it a practical choice for panel builders, automation engineers and industrial maintenance professionals.
Key Advantages
- 16 A industrial relay interface module for demanding electrical control applications.
- 230 V AC nominal coil voltage for compatible mains-voltage control circuits.
- Single changeover contact (SPDT) supports flexible electrical switching.
- 250 V AC rated contact voltage for suitable industrial electrical loads.
- 4000 VA AC1 switching capacity for compatible resistive loads.
- 30 A maximum peak contact current under specified operating conditions.
- Silver nickel (AgNi) contact material for dependable electromechanical switching.
- 15.8 mm slimline construction conserves valuable control panel space.
- 35 mm DIN rail mounting simplifies installation.
- Box-clamp screw terminals provide convenient field wiring.
- Green LED supply indication and varistor suppression assist maintenance and control circuit protection.
- Replaceable plug-in relay allows straightforward servicing without replacing the complete interface assembly.
Key Features
- Finder 48 Series industrial relay interface module.
- 48.61 single-pole relay interface platform.
- 230 V AC nominal operating coil.
- 50/60 Hz AC coil operation.
- 1 CO (SPDT / 1 Form C) contact configuration.
- 16 A rated contact current.
- 30 A maximum peak contact current.
- 250 V AC rated contact voltage.
- 400 V AC maximum switching voltage.
- 4000 VA AC1 switching capacity.
- 1000 VA AC15 switching capacity at 230 V AC.
- Silver nickel (AgNi) contact material.
- Green LED supply status indication.
- Varistor-based coil suppression.
- 15.8 mm module width.
- 35 mm DIN rail mounting.
- Box-clamp screw-terminal connections.
- Removable plug-in relay for convenient maintenance.
- IP20 protection category.
- Suitable for industrial automation, PLC interfacing and auxiliary switching applications.
Reliable 230 V AC Relay Interfacing for Industrial Control Systems
The Finder 48.61.8.230.1060SPA operates using an electromagnetic relay mechanism. When the 230 V AC coil is energised, the relay transfers its changeover contact from the normally closed terminal to the normally open terminal. When the control supply is removed, the contact automatically returns to its original position, providing straightforward non-latching switching operation.
The single changeover contact configuration provides common, normally open and normally closed connections for control logic, auxiliary switching and electrical load management. With a 16 A rated contact current, the module can handle compatible higher-current loads while occupying relatively little DIN rail space. For switching currents above 10 A, Finder specifies parallel connection of the appropriate contact terminals, including terminals 21 with 11, 24 with 14 and 22 with 12.
The integrated green LED supply indication provides convenient visual confirmation of the control input, while the varistor suppression arrangement helps limit switching-related voltage transients. Its plug-in construction allows the relay to be replaced independently of the socket, reducing maintenance effort. As with any industrial relay, the load type, inrush current, electrical clearances and applicable wiring requirements should be checked before installation.
Typical Applications
- Industrial automation and PLC interface circuits.
- Electrical control panels and DIN rail assemblies.
- Machinery control and auxiliary switching systems.
- Industrial equipment using 230 V AC control supplies.
- Electrical load switching and equipment enable circuits.
- Motor starter and contactor control interfaces.
- Building automation and facilities management systems.
- Heating, ventilation and air conditioning control equipment.
- Industrial alarm, indication and monitoring circuits.
- Electrical distribution and control cabinets.
- OEM machinery and electrical equipment manufacturing.
- Maintenance and replacement of compatible Finder 48 Series relay interface modules.
