Why Choose the Finder 62.33.8.024.4300 Power Relay?
The Finder 62.33.8.024.4300 is a 16 A industrial electromechanical power relay designed for reliable electrical switching in industrial automation, machinery control and electrical distribution applications. Part of the established Finder 62 Series, this relay features 3 normally open contacts (3 NO / 3PST-NO), a 24 V AC operating coil and a plug-in connection arrangement for industrial electrical equipment.
The 62.33-4300 configuration features three normally open contacts with a minimum 3 mm contact gap, providing increased contact separation when the relay is de-energised. Its 16 A rated contact current and 4,000 VA AC-1 switching capacity make it suitable for appropriately rated industrial electrical loads, including heating, lighting and auxiliary power circuits.
Designed for convenient installation and maintenance, the Finder 62.33.8.024.4300 uses Faston 187 terminals measuring 4.8 × 0.5 mm and supports installation with compatible Finder 92 Series sockets. Its silver tin oxide (AgSnO2) contacts provide a cadmium-free switching solution, while reinforced insulation between the coil and contacts supports reliable operation in industrial control assemblies.
Key Advantages
- 16 A rated contact current for industrial electrical switching applications.
- 3 normally open contacts (3PST-NO) enable simultaneous switching of three electrical circuits.
- 24 V AC operating coil suitable for compatible industrial AC control systems.
- Minimum 3 mm contact gap provides increased separation between open contacts.
- 4,000 VA AC-1 switching capacity for appropriately rated resistive loads.
- Silver tin oxide (AgSnO2) contact material provides a cadmium-free contact arrangement.
- Faston 187 plug-in terminals support convenient installation and relay replacement.
- Reinforced insulation between coil and contacts supports separation of control and switched circuits.
Key Features
- Finder 62 Series industrial electromechanical power relay.
- 3 NO (3PST-NO) contact configuration.
- 16 A nominal contact current.
- 24 V AC nominal coil voltage.
- 50/60 Hz AC coil operation.
- 250 V AC rated contact voltage.
- 400 V AC maximum switching voltage.
- 4,000 VA rated AC-1 switching capacity.
- 750 VA rated AC-15 switching capacity at 230 V AC.
- Minimum 3 mm normally open contact gap.
- 120 A maximum peak contact current for 5 ms.
- Silver tin oxide (AgSnO2) contact material.
- Faston 187 terminals measuring 4.8 × 0.5 mm.
- Compatible with suitable Finder 92 Series relay sockets.
- Monostable, non-latching electromagnetic operation.
- Reinforced insulation between coil and contacts.
Reliable Power Switching for Industrial Automation
The Finder 62.33.8.024.4300 uses an electromagnetic switching mechanism to operate three normally open contacts simultaneously. When the 24 V AC coil is energised, all three contacts close, allowing current to flow through their respective circuits. When the coil is de-energised, the contacts return to their open positions, interrupting the connected electrical loads.
The 3 NO contact arrangement makes this relay particularly useful where multiple circuits must be switched from a common control signal. Its minimum 3 mm contact gap, 16 A contact rating and plug-in construction support industrial applications requiring dependable switching and practical maintenance. Contact ratings must be checked against the actual load category, particularly for inductive loads, motors and equipment with high starting currents.
Typical Applications
- Industrial automation and machinery control systems.
- 24 V AC-operated industrial control circuits.
- Electrical control panels and automation cabinets.
- Three-circuit electrical switching applications.
- Industrial lighting and auxiliary power control.
- Heating equipment and electrical temperature control systems.
- Motor control circuits within the specified switching ratings.
- OEM machinery and industrial electrical assemblies.
