Why Choose the Finder 62.33.9.125.4360 Power Relay?
The Finder 62.33.9.125.4360 is a 16 A industrial electromechanical power relay from the Finder 62 Series, designed for switching electrical loads in industrial automation, machinery control and electrical distribution equipment. Featuring a 125 V DC operating coil and 3 normally open contacts (3 NO / 3PST-NO), it enables three independent circuits to be switched simultaneously using a single control signal.
The 62.33-4360 configuration combines a minimum 3 mm contact gap with silver tin oxide (AgSnO2) contacts, providing a cadmium-free contact arrangement for appropriately rated industrial loads. Its 16 A rated contact current, 250 V AC rated contact voltage and 4,000 VA AC-1 switching capacity make it suitable for a variety of industrial switching applications.
This variant incorporates an integrated LED indicator and protective diode, providing visual indication of coil energisation and suppression of switching transients. The relay features Faston 187 terminals measuring 4.8 × 0.5 mm and supports installation with compatible Finder 92 Series sockets, simplifying control panel assembly, maintenance and replacement.
Key Advantages
- 16 A contact rating for appropriately rated industrial electrical loads.
- 3 normally open contacts (3PST-NO) enable simultaneous switching of three independent circuits.
- 125 V DC operating coil for compatible industrial DC control systems.
- Minimum 3 mm contact gap provides increased separation between open contacts.
- Integrated LED indicator provides visual confirmation of coil energisation.
- Protective diode helps suppress the voltage transient generated when the coil is switched off.
- Silver tin oxide (AgSnO2) contacts provide a cadmium-free switching arrangement.
- Faston 187 plug-in terminals facilitate installation, maintenance and replacement.
Key Features
- Finder 62 Series industrial electromechanical power relay.
- 3 NO (3PST-NO) contact configuration.
- 16 A rated contact current.
- 125 V DC nominal coil voltage.
- 24 mA nominal coil current.
- 3 W nominal DC coil power consumption.
- 250 V AC rated contact voltage.
- 400 V AC maximum switching voltage.
- 4,000 VA rated AC-1 switching capacity.
- 750 VA rated AC-15 switching capacity at 230 V AC.
- Minimum 3 mm contact gap.
- Silver tin oxide (AgSnO2) contact material.
- Integrated LED and diode for coil indication and transient suppression.
- Faston 187 terminals measuring 4.8 × 0.5 mm.
- 8-pin connection arrangement for the operating coil and three normally open contacts.
- Plug-in installation with compatible Finder 92 Series sockets.
- Monostable, non-latching electromagnetic operation.
Reliable Power Switching for Industrial Automation
The Finder 62.33.9.125.4360 uses an electromagnetic operating mechanism to control three normally open contact sets. When its 125 V DC coil is energised with the correct polarity, all three contacts close, allowing current to flow through their respective circuits. When coil power is removed, the contacts return to their open positions, interrupting the connected loads.
The integrated LED indicator provides a convenient visual indication of coil energisation, while the protective diode helps reduce the voltage transient generated during coil de-energisation. Because the diode makes the coil connection polarity-sensitive, the manufacturer's terminal markings must be followed during installation.
With its 16 A contact rating, minimum 3 mm contact gap and plug-in construction, this relay provides a practical solution for industrial control assemblies requiring multi-circuit switching. Connected loads, switching frequency and protective devices must remain within the applicable manufacturer ratings, particularly when switching inductive or high-inrush loads.
Typical Applications
- Industrial automation and machinery control systems.
- 125 V DC-operated industrial control circuits.
- Electrical control panels and automation cabinets.
- Three-circuit electrical switching applications.
- Industrial lighting and auxiliary power control.
- Heating, ventilation and electrical temperature control equipment.
- Motor starter auxiliary control and signalling circuits.
- OEM machinery and industrial electrical assemblies.
