Why Choose the Finder 62.82.8.110.4300 Industrial Power Relay?
The Finder 62.82.8.110.4300 is a heavy-duty 16 A industrial electromechanical power relay designed for reliable switching of electrical loads in industrial automation, machinery and electrical control systems. Part of the established Finder 62 Series, this model combines a 110 V AC coil with two normally open contacts and a flange-mounting arrangement.
The relay features a 2 NO (DPST-NO) contact configuration with a contact gap of at least 3 mm when open. Each contact is rated at 16 A and 250 V AC, with a maximum switching voltage of 400 V AC and a rated AC1 switching capacity of 4,000 VA. This configuration is particularly useful where two electrical circuits must be energised simultaneously.
The Finder 62.82.8.110.4300 incorporates silver tin oxide (AgSnO2) contacts, Faston 250 quick-connect terminals and a rear flange-mounting design. Its combination of high-current switching, reinforced coil-to-contact insulation and increased normally open contact separation makes it suitable for industrial control equipment and appropriately rated power-switching applications.
Key Advantages
- 16 A contact rating: Supports switching of appropriately rated industrial electrical loads.
- 110 V AC coil: Designed for compatible AC control circuits operating at 50/60 Hz.
- Two normally open contacts: Allows simultaneous switching of two independent circuits.
- Minimum 3 mm contact gap: Provides increased contact separation in the open state.
- Silver tin oxide contacts: AgSnO2 contact material supports reliable industrial power switching.
- Faston 250 terminals: Enables practical electrical connection using compatible quick-connect terminals.
- Rear flange mounting: Supports direct mounting within suitable electrical equipment and control panels.
- High impulse insulation: Provides 6 kV coil-to-contact impulse withstand capability.
- High peak-current capability: The contact system is rated for a maximum peak current of 120 A for 5 ms.
- Industrial construction: Designed for demanding automation, machinery and electrical switching applications.
Key Features
- Finder 62 Series industrial power relay.
- 62.82 flange-mounted relay construction.
- 110 V AC nominal coil voltage.
- 50/60 Hz AC coil operation.
- 2 NO (DPST-NO) contact configuration.
- 16 A rated contact current.
- 250 V AC rated contact voltage.
- 400 V AC maximum switching voltage.
- 4,000 VA rated AC1 switching capacity.
- 750 VA rated AC15 switching capacity at 230 V AC.
- 120 A maximum peak contact current for 5 ms.
- At least 3 mm contact separation when open.
- Silver tin oxide (AgSnO2) contact material.
- Monostable electromechanical operation.
- Faston 250 quick-connect terminals.
- Rear flange mounting.
- Reinforced insulation between coil and contacts.
- RT I environmental protection category.
Reliable High-Current Switching for Industrial Automation
The Finder 62.82.8.110.4300 enables a 110 V AC control signal to operate two independent normally open contact sets. When the relay coil is energised, both contacts close to complete their respective electrical circuits. When coil power is removed, the contacts return to their normally open positions.
A distinguishing feature of the 62.82-4300 configuration is its contact separation of at least 3 mm. This provides a greater open-contact gap than standard changeover variants and makes the relay useful in applications where the specified contact separation is an important design requirement. Its 16 A current rating and 4,000 VA AC1 switching capacity support appropriately rated resistive loads.
The rear flange mounting and Faston 250 terminals allow the relay to be incorporated directly into suitable electrical equipment. Its reinforced coil-to-contact insulation, silver tin oxide contacts and industrial construction make it a practical choice for machine builders, electrical panel manufacturers and automation engineers. Load-specific switching ratings and installation requirements should always be checked before use.
Typical Applications
- Industrial electrical control panels.
- Machinery and production equipment.
- Industrial automation and process control.
- Electrical power and load switching.
- Heating and ventilation control equipment.
- Building automation systems.
- Auxiliary control and switching circuits.
- Electrical equipment requiring two normally open contacts.
- OEM industrial machinery and electrical assemblies.
- Control systems using 110 V AC supplies.
