Why Choose the Finder 65.61.9.012.0300S Power Relay?
The Finder 65.61.9.012.0300S is a robust 30 A electromagnetic power relay designed for dependable switching of electrical loads in industrial automation, machinery control and commercial equipment. Featuring a 12 V DC operating coil and a single normally open (SPST-NO) contact, this relay enables a low-voltage control circuit to switch higher-power electrical equipment.
Part of the established Finder 65 Series, the 65.61.9.012.0300S combines a high-current contact system with direct printed circuit board (PCB) mounting and bifurcated solder terminals. Its silver cadmium oxide (AgCdO) contact material is designed for reliable power switching, while the minimum 3 mm contact gap provides enhanced separation between the contacts when open.
With a 30 A resistive contact rating at 250 V AC, a 12 V DC coil and a compact PCB-compatible design, this Finder power relay is suited to industrial heating systems, electrical control assemblies, automated machinery and OEM equipment. It provides a practical solution where dependable load switching and substantial open-contact separation are required.
Key Advantages
- 30 A rated switching current for suitable resistive electrical loads.
- 12 V DC operating coil for integration into low-voltage electronic control systems.
- Single normally open (SPST-NO) contact for straightforward power switching.
- Minimum 3 mm contact gap for enhanced electrical separation when the relay is open.
- 250 V AC rated contact voltage and 400 V AC maximum switching voltage.
- 7500 VA resistive switching capacity (AC1) under the applicable operating conditions.
- Silver cadmium oxide (AgCdO) contacts designed for reliable high-current switching.
- PCB mounting with bifurcated terminals for secure soldered integration.
- Non-polarised DC coil for straightforward connection to a compatible control supply.
- Electromagnetic switching provides galvanic separation between the coil and contact circuits.
- Suitable for industrial control equipment, commercial appliances and OEM electronic assemblies.
Key Features
- Finder 65 Series electromagnetic power relay.
- Type 65.61-0300 contact arrangement.
- 30 A rated contact current for resistive loads.
- 12 V DC nominal coil voltage.
- Single normally open (SPST-NO) contact.
- 250 V AC rated contact voltage.
- 400 V AC maximum switching voltage.
- 7500 VA rated resistive switching capacity (AC1).
- Silver cadmium oxide (AgCdO) contact material.
- At least 3 mm open-contact separation.
- PCB mounting with solder terminals.
- Bifurcated terminal design for integration into suitable PCB layouts.
- Non-polarised, monostable DC coil operation.
- Normally open contact closes when the coil is energised.
- Contact returns to its open position when the coil supply is removed.
- Designed for use in industrial and commercial electrical equipment.
Reliable High-Current Switching with Enhanced Contact Separation
The Finder 65.61.9.012.0300S allows a 12 V DC control circuit to operate a separate, higher-power electrical load. When the relay coil is energised, its normally open contact closes and completes the load circuit. Removing the coil supply causes the contact to open, interrupting power to the connected equipment.
A key feature of the 65.61-0300 configuration is its minimum 3 mm contact gap. This provides increased physical separation between the open contacts, making the relay suitable for equipment designs where enhanced contact separation is required. Any use for safety-related disconnection must still be assessed against the relevant equipment standards and circuit design.
The combination of a 30 A switching rating, AgCdO contact material and PCB mounting makes this relay a practical choice for industrial electronic assemblies. Its 12 V DC coil can be operated by a suitably rated control circuit, allowing electronic controllers to switch heating elements, machinery functions and other compatible electrical loads. Appropriate coil suppression, load protection and PCB conductor sizing should be considered during installation.
Typical Applications
- Industrial automation and electrical control systems.
- High-current switching on industrial printed circuit boards.
- 12 V DC controlled power switching circuits.
- Industrial heating and temperature control equipment.
- Commercial ovens and catering equipment.
- Boiler, burner and heating control assemblies.
- Industrial washing machines and commercial appliances.
- Machinery control and automated production equipment.
- HVAC and ventilation control systems.
- Electrical power management and distribution equipment.
- OEM electronic control boards and industrial machine building.
