Why Choose the Finder 65.61.9.024.4300 Power Relay?
The Finder 65.61.9.024.4300 is a high-performance 30 A electromagnetic power relay designed for reliable switching of electrical loads in industrial automation, machinery control and commercial equipment. Featuring a 24 V DC operating coil and a single normally open (SPST-NO) contact, this relay allows a low-voltage industrial control circuit to operate higher-power electrical equipment.
Part of the established Finder 65 Series power relay range, the 65.61.9.024.4300 combines a high-current contact system with silver tin oxide (AgSnO₂) contact material and direct printed circuit board (PCB) mounting. Its minimum 3 mm contact gap provides enhanced physical separation between the open contacts, making it particularly useful in electrical equipment requiring increased contact isolation.
With a 30 A rated contact current at 250 V AC, 7500 VA resistive switching capacity (AC1) and a 24 V DC coil, the Finder 65.61.9.024.4300 is well suited to industrial heating systems, automated machinery, electrical control assemblies and OEM equipment. Its PCB-mounted design provides a practical solution for integrating high-current electromagnetic switching into industrial electronic control boards.
Key Advantages
- 30 A rated contact current for suitable high-power resistive electrical loads.
- 24 V DC operating coil compatible with common industrial DC control systems.
- Single normally open (SPST-NO) contact for straightforward electrical load switching.
- 250 V AC rated contact voltage with a maximum switching voltage of 400 V AC.
- 7500 VA rated resistive switching capacity (AC1) for demanding power control applications.
- Minimum 3 mm contact gap providing enhanced separation between open contacts.
- Silver tin oxide (AgSnO₂) contact material for robust electrical switching performance.
- Direct PCB mounting for integration into industrial electronic control assemblies.
- 1.3 W nominal coil consumption for efficient electromagnetic operation.
- 54 mA nominal coil current suitable for appropriately rated DC control circuitry.
- Monostable, non-latching operation automatically returns the contact to its open state when coil power is removed.
- Suitable for industrial machinery, heating controls, electrical power management and OEM equipment.
Key Features
- Finder 65 Series electromagnetic power relay.
- Type 65.61-4300 PCB-mounted configuration.
- 30 A rated contact current.
- 24 V DC nominal coil voltage.
- 1 normally open (SPST-NO) contact.
- 250 V AC rated contact voltage.
- 400 V AC maximum switching voltage.
- 7500 VA rated resistive switching capacity (AC1).
- 30 A resistive DC switching rating at 24 V DC.
- Silver tin oxide (AgSnO₂) contact material.
- Minimum 3 mm contact separation.
- 1.3 W nominal DC coil consumption.
- 445 Ω nominal coil resistance.
- 54 mA nominal coil current.
- 20.4–26.4 V DC nominal coil operating range.
- Direct PCB mounting with solder terminals.
- 15 ms operate time and 4 ms release time.
- 30 million mechanical operations under specified conditions.
- −40 to +75 °C operating temperature range.
- Electromagnetic, monostable and non-latching operation.
Reliable High-Current Switching with 24 V DC Control
The Finder 65.61.9.024.4300 enables a 24 V DC control circuit to switch a separate higher-power electrical load. When the coil is energised, its normally open contact closes and completes the load circuit. Removing the coil voltage causes the relay to return to its normal state, opening the contact and interrupting current flow to the connected equipment.
The relay's 30 A contact rating and silver tin oxide contact material make it suitable for demanding electrical switching applications. Its minimum 3 mm contact gap provides increased physical separation between the contacts when open, supporting equipment designs that require enhanced contact isolation. Any safety-related disconnection function must be assessed against the applicable equipment standards and overall circuit design.
The 24 V DC coil is particularly useful in industrial automation systems using standard DC control supplies. Combined with direct PCB mounting, this makes the Finder 65.61.9.024.4300 a practical choice for electronic control boards, heating equipment and machinery. Suitable coil suppression, protective devices, PCB copper dimensions and electrical clearances should be incorporated into the final installation.
Typical Applications
- Industrial automation and electrical control systems.
- 24 V DC controlled high-current switching circuits.
- Printed circuit board assemblies requiring power relays.
- Industrial heating and temperature control equipment.
- Commercial ovens and catering equipment.
- Boiler, burner and heating control assemblies.
- Industrial washing machines and commercial appliances.
- Machinery control and automated production equipment.
- HVAC and ventilation control systems.
- Electrical power management and distribution equipment.
- OEM electronic control boards and industrial machine building.
