Finder 40.62.9.048.0000 – 40 Series Miniature PCB Relays
Finder 40.62.9.048.0000 miniature electromechanical power relay with a 48 V DC operating coil, 10 A rated contact current, two DPDT changeover contacts and silver nickel contact material, designed for reliable electrical switching in industrial automation, machinery and control systems.
Why Choose the Finder 40.62.9.048.0000 Miniature Power Relay?
The Finder 40.62.9.048.0000 is a compact and reliable 10 A miniature electromechanical power relay designed for dependable electrical switching in industrial automation, control panels and electronic equipment. As part of the established Finder 40 Series miniature PCB and plug-in relay range, it combines a high switching capacity with compact dimensions and flexible installation options for industrial electrical control systems.
Featuring a 48 V DC operating coil and two changeover contacts (2 CO / DPDT), the Finder 40.62.9.048.0000 enables two separate electrical circuits to be switched simultaneously using a single control signal. Its silver nickel (AgNi) contact material provides dependable electromechanical switching performance for compatible resistive, control and industrial electrical loads.
With a 10 A rated contact current, a 250 V AC rated contact voltage and a 2500 VA AC1 resistive switching capacity, this relay is suitable for a wide range of industrial control applications. Its compact housing, measuring approximately 29 × 12.4 × 25 mm, allows straightforward integration into printed circuit boards, compatible relay sockets and electrical control equipment.
Key Advantages
Compact miniature electromechanical power relay for industrial and electronic switching applications.
48 V DC nominal coil voltage for compatible DC control systems.
10 A rated contact current for switching suitable electrical loads.
Two changeover contacts (DPDT) enable simultaneous switching of two independent circuits.
250 V AC rated contact voltage suitable for industrial electrical systems.
2500 VA AC1 switching capacity for resistive load applications.
Silver nickel (AgNi) contacts provide dependable switching performance.
Reinforced coil-to-contact insulation supports electrical isolation between control and load circuits.
Compact housing minimises installation space in electronic equipment and control panels.
Compatible with suitable Finder 95 Series relay sockets for convenient installation and replacement.
Low coil power consumption supports efficient electrical control circuit operation.
Key Features
Finder 40 Series miniature PCB and plug-in power relay.
40.62 double-pole changeover relay platform.
48 V DC nominal operating coil.
10 A rated contact current.
2 CO (DPDT / 2 Form C) contact configuration.
250 V AC rated contact voltage.
400 V AC maximum switching voltage.
2500 VA AC1 resistive switching capacity.
750 VA AC15 switching capacity at 230 V AC.
0.37 kW single-phase motor switching rating at 230 V AC.
Silver nickel (AgNi) contact material.
3500 Ω nominal coil resistance.
0.65 W nominal coil power consumption.
Approximately 14 mA nominal coil current.
6 kV coil-to-contact impulse withstand voltage.
8 mm creepage and clearance distance between the coil and contacts.
5 mm contact pin pitch for compact PCB integration.
Flux-proof relay construction for PCB assembly applications.
Suitable for PCB mounting and compatible relay socket installations.
Reliable Dual-Circuit Switching for Industrial Automation
Electromechanical relays such as the Finder 40.62.9.048.0000 enable electrical loads to be controlled through a separate DC control circuit. When the 48 V DC coil is energised, the relay's internal electromagnetic mechanism changes the position of its contacts, allowing connected electrical circuits to be switched without passing the load current through the control device.
The two changeover contact (DPDT) configuration allows two independent circuits to be switched simultaneously. Each contact provides common, normally open and normally closed connections, making the relay suitable for signal routing, auxiliary switching and coordinated electrical control functions in industrial machinery and automation equipment.
The Finder 40.62 relay platform combines 10 A contact ratings, silver nickel contact technology and reinforced electrical insulation in a compact housing. Its 2500 VA AC1 resistive switching capacity makes it suitable for compatible electrical loads, while its PCB and socket mounting options support flexible integration into industrial control equipment. Appropriate load-specific ratings and protective measures should be observed when switching motors, inductive loads or DC circuits.
Typical Applications
Industrial automation and machinery control systems.
Electrical control panels and distribution equipment.
PLC-controlled switching and interface circuits.
Industrial equipment using 48 V DC control supplies.
Dual-circuit switching and signal routing applications.
Printed circuit board assemblies and electronic control equipment.
Heating, ventilation and air conditioning control systems.
Auxiliary motor control and contactor interface circuits.
Building automation and electrical control installations.
Power supply and electrical load switching systems.
OEM equipment manufacturing and machine building.
Industrial maintenance and replacement of compatible miniature relays.
Technical Specifications
Tick the specs you need, then view products that match.
Mounting Type
PCB, Plug-in socket
Switching Current (A)
10 A
Load Voltage
400 V AC
Manufacturer
Finder
Series
Finder 40 Series
Model
40.62.9.048.0000
Product type
Miniature electromechanical power relay
Relay operation
Monostable, non-latching electromagnetic
Contact configuration
2 CO (DPDT / 2 Form C)
Number of poles
2
Number of terminals
8
Nominal coil voltage
48 V DC
Coil supply type
DC
Nominal coil resistance
3500 Ω
Nominal coil consumption
0.65 W
Nominal coil current
approx. 14 mA
Rated contact current
10 A
Maximum peak contact current
20 A
Rated contact voltage
250 V AC
Maximum switching voltage
400 V AC
Rated AC1 switching capacity
2500 VA
Rated AC15 switching capacity
750 VA at 230 V AC
Single-phase motor rating
0.37 kW at 230 V AC
DC1 breaking capacity
10 A at 24 V DC; 0.6 A at 110 V DC; 0.25 A at 220 V DC
Minimum switching load
300 mW (5 V / 5 mA)
Contact material
Silver nickel (AgNi)
Electrical life at rated AC1 load
100,000 cycles
Mechanical life
Up to 20 million cycles for standard DC coil versions
Typical operate time
7 ms
Typical release time
3 ms
Coil-to-contact insulation
Reinforced
Coil-to-contact impulse withstand voltage
6 kV
Coil-to-contact dielectric strength
4000 V AC
Coil-to-contact creepage and clearance
8 mm
Dielectric strength between open contacts
1000 V AC
Ambient operating temperature
−40 to +85 °C
Environmental protection category
RT II, flux-proof
Contact pin pitch
5 mm
Mounting type
PCB mounting or compatible plug-in relay socket
Termination style
PCB pins
Compatible socket family
Finder 95 Series, subject to socket compatibility
Dimensions (L × W × H)
approx. 29 × 12.4 × 25 mm
Application category
Industrial automation and electrical control
Frequently Asked Questions
What is the Finder 40.62.9.048.0000 used for?
The Finder 40.62.9.048.0000 is a miniature electromechanical power relay designed for switching electrical circuits in industrial automation, machinery and electronic control equipment. Its two changeover contacts allow two independent circuits to be controlled simultaneously using a single 48 V DC operating coil.
What coil voltage does the Finder 40.62.9.048.0000 require?
The relay operates using a 48 V DC nominal coil with a nominal resistance of 3500 Ω and a coil power consumption of approximately 0.65 W. It is designed for compatible DC industrial control supplies.
What is the contact current rating of this relay?
The Finder 40.62.9.048.0000 has a 10 A rated contact current and a 250 V AC rated contact voltage. Its rated AC1 resistive switching capacity is 2500 VA, with a maximum switching voltage of 400 V AC. The permissible switching current depends on the electrical load and operating conditions.
What does the DPDT contact configuration mean?
DPDT (Double Pole Double Throw) means the relay contains two independent changeover contacts, also described as 2 CO or 2 Form C. Each contact provides common, normally open and normally closed connections, allowing two separate electrical circuits to change state when the relay coil is energised.
How is the Finder 40.62.9.048.0000 installed?
The Finder 40.62.9.048.0000 features PCB-style terminals suitable for direct PCB mounting or compatible plug-in relay sockets. Suitable Finder 95 Series sockets can be used where the pin configuration and electrical ratings match the relay. The compact housing allows installation in electronic control assemblies and industrial electrical panels.
Trusted by Industrial Automation Professionals Worldwide
Finder 40 Series miniature power relays are established components in industrial automation, electronic control equipment and electrical switching systems. The Finder 40.62.9.048.0000 combines a 48 V DC operating coil, two 10 A changeover contacts, silver nickel contact technology and reinforced electrical insulation to deliver dependable dual-circuit switching in compact industrial and electronic control applications.
Mounting Type
PCB, Plug-in socket
Switching Current (A)
10 A
Load Voltage
400 V AC
Manufacturer
Finder
Series
Finder 40 Series
Model
40.62.9.048.0000
Product type
Miniature electromechanical power relay
Relay operation
Monostable, non-latching electromagnetic
Contact configuration
2 CO (DPDT / 2 Form C)
Number of poles
2
Number of terminals
8
Nominal coil voltage
48 V DC
Coil supply type
DC
Nominal coil resistance
3500 Ω
Nominal coil consumption
0.65 W
Nominal coil current
approx. 14 mA
Rated contact current
10 A
Maximum peak contact current
20 A
Rated contact voltage
250 V AC
Maximum switching voltage
400 V AC
Rated AC1 switching capacity
2500 VA
Rated AC15 switching capacity
750 VA at 230 V AC
Single-phase motor rating
0.37 kW at 230 V AC
DC1 breaking capacity
10 A at 24 V DC; 0.6 A at 110 V DC; 0.25 A at 220 V DC
Minimum switching load
300 mW (5 V / 5 mA)
Contact material
Silver nickel (AgNi)
Electrical life at rated AC1 load
100,000 cycles
Mechanical life
Up to 20 million cycles for standard DC coil versions
Free UK delivery on orders over £200 ex VAT. Order in-stock items before 2pm Monday to Friday for next-day delivery.
This productManufacturer Lead Time
Standard Manufacturer Lead Time 6-8 Weeks, Call For Express Delivery Options
Standard delivery
£8 ex VAT · free over £200
UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Collect from our showroom
Mon–Fri, 8am–5pm
Order and pay online, then collect from our showroom.
Please allow 15–30 minutes after ordering for us to prepare your order.
Northern Ireland, ROI & export
Priced at checkout
We deliver to Northern Ireland, the Republic of Ireland and overseas.
Delivery is calculated at checkout based on your destination.
Orders with mixed availability
Shipped complete
If part of your order is on a lead time, we hold it and send everything together.
Need the in-stock items sooner? Ask us and we can split the delivery.
Business customer returns
Returns & order support
Need to return an item? Find the guidance for your order below, then contact our team before sending anything back.
Stocked items
Request within 30 days
Changed your mind or ordered the wrong item? Request a return within 30 days of receipt. There is no restocking charge.
Items must be unused, in resalable condition and in their original packaging, and returns need our approval first. Return carriage is at your cost, and the original delivery charge is not refunded.
Faulty or damaged items
Tell us as soon as possible
Faulty, damaged on delivery or the wrong product supplied? Contact our team as soon as possible with the details.
We will review the issue and arrange an appropriate resolution under our terms and conditions and your statutory rights.
Made-to-order items
Manufacturer approval needed
Manufactured, configured and special-order products can only be returned with the manufacturer’s approval. Any handling charge is agreed with you when you request the return.
This does not affect claims for faulty goods or items that do not meet the agreed specification.
Let’s get your return sorted.
Send your order number, product details and reason for return. For faults or delivery damage, include photographs if available. We will confirm the next steps.
The 30-day return request period applies to change-of-mind returns for stocked items. It does not limit your statutory rights for faulty or non-conforming goods.
● Service Agreements
Credit Accounts
Our service agreements are built to support long term procurement relationships. By working closely with engineering teams and procurement departments, we help streamline purchasing processes while ensuring consistent access to critical components and sourcing support when it matters most.
Priority sourcing and supply support
Flexible payment terms for qualifying organisations
Support for engineering, maintenance, and operations
500 +
Stock lines ready to ship
1,000 +
Same day dispatches
3500 +
Customers supported
28
Trusted Manfacturers
● frequently asked questions
Common questions about our products and support
At Led Controls Ltd we help engineers source the right automation and control gear with confidence. below are quick answers to what we are asked most often.
What product ranges do you supply
We supply all leading manfacturers in our industry. we offer next day delivery on most poplour products.
Can you help specify the correct part?
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
Do you have stock for urgent orders?
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
What are your delivery times and costs?
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
What about warranties, returns and faulty items?
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
LED Controls is a specialist distributor of factory automation and industrial controls, supplying OEMs, machine builders, panel builders and end users throughout the UK and worldwide. As a trusted UK distributor for many of the world’s leading automation manufacturers, we provide industrial control products, technical expertise and bespoke automation solutions backed by outstanding customer service.
2025 has been a big year for LED Controls, and our blog has expanded accordingly. We've covered a wide range of topics across industrial control and factory automation this year. From core technology explainers and new product releases to panel building best practice...
