Why Choose the ABB Protecta Home PH 4 Module Surface-Mounted Enclosure?
The ABB Protecta Home PH 4 Module Surface-Mounted Enclosure (ABB order code 1SKH004001C0001) is a compact electrical distribution enclosure designed for residential and similar low-voltage installations. Part of ABB's Protecta Home range, this four-module surface-mounted unit provides a practical housing solution where a small number of modular electrical devices must be accommodated in an organised distribution assembly.
Designed for surface mounting (SM), the enclosure is particularly useful where recessed installation is impractical or unnecessary. Its four-module capacity makes it an appropriate format for compact electrical distribution applications, including selected small-circuit arrangements, local distribution points and electrical installation upgrades.
The Protecta Home family features steel enclosure construction, with ABB describing the range as suitable for indoor wall-mounted installations. The wider product family incorporates an epoxy-coated sheet-steel design, a RAL 7035 grey finish and coordinated components intended to support electrical distribution assembly and maintenance.
The PH four-module configuration offers a compact alternative to larger consumer units while retaining the benefits of the ABB Protecta Home enclosure system. The exact supplied internal equipment, electrical ratings and overall dimensions should be confirmed against the manufacturer documentation for order code 1SKH004001C0001 before installation.
Key Advantages
- Compact four-module format for smaller electrical distribution requirements.
- Surface-mounted design avoids the need for a fully recessed wall opening.
- Part of the ABB Protecta Home range of residential distribution enclosures.
- Steel enclosure construction provides a robust housing for compatible electrical equipment.
- Indoor wall-mounting application for suitable electrical installation environments.
- RAL 7035 grey family finish provides a professional, neutral appearance.
- Small enclosure footprint is useful where installation space is limited.
- Suitable for electrical refurbishment and new installation projects.
- Supports organised modular equipment installation within the designated four-module capacity.
- Coordinated ABB product system supports compatible component selection.
- Accessible surface installation assists inspection and maintenance planning.
- Practical for local distribution applications where a larger consumer unit is unnecessary.
- Professional enclosure solution for qualified electricians and electrical contractors.
- Clearly identified manufacturer part with ABB order code 1SKH004001C0001.
Key Features
- ABB Protecta Home enclosure.
- Model designation PH.
- Four-module capacity.
- Surface-mounted (SM) configuration.
- Compact residential distribution enclosure format.
- Steel enclosure construction within the Protecta Home product family.
- Epoxy-coated steel family construction.
- RAL 7035 grey family finish.
- Designed for indoor wall-mounted applications.
- Suitable for compatible modular electrical equipment.
- Supports compact electrical distribution arrangements.
- Part of ABB's coordinated Protecta Home enclosure system.
- Manufacturer order code 1SKH004001C0001.
- Four-module surface-mounted variant distinguished from larger Protecta Home models.
- Professional electrical installation application.
Compact Surface-Mounted Electrical Distribution for Residential Installations
The ABB Protecta Home PH four-module enclosure is intended for installations where a small, surface-mounted electrical distribution arrangement is required. Its compact capacity is useful where the project does not call for a larger consumer unit or distribution board, provided the selected equipment fits the available module space.
Surface mounting offers flexibility when the wall construction does not permit a recessed enclosure or when an accessible wall-mounted arrangement is preferred. This can be advantageous during refurbishment, alterations and installation work in utility areas or designated electrical service locations.
The wider Protecta Home range uses coated steel enclosure construction and is designed around indoor wall-mounted electrical distribution. ABB identifies IP43 with a door and IK07 impact resistance as family characteristics. The precise protective performance of this four-module product should be checked against its individual technical documentation and installed configuration.
Before selecting modular devices, installers should verify the four-module capacity against the widths of the proposed equipment. Main switches, MCBs, RCBOs, RCDs and other modular components may occupy different numbers of module positions, so the final arrangement must be planned around the available space and the enclosure manufacturer's compatibility requirements.
Careful consideration should also be given to cable entry, conductor termination, working space and thermal performance. A compact enclosure may be appropriate for a small number of devices, but the number of modules alone does not determine the allowable electrical load or the suitability of the finished assembly.
The Protecta Home product family includes several larger surface-mounted variants, including 6-, 10-, 12-, 14-, 18-, 22- and 24-module configurations. Where a project requires additional circuit positions, future expansion or a different protective-device arrangement, a larger enclosure should be considered rather than exceeding the PH four-module capacity.
Installation should be carried out by a competent electrical professional in accordance with the manufacturer's instructions and applicable requirements of BS 7671. The installer must confirm the exact contents of the supplied enclosure, the appropriate protective devices, conductor arrangements and the suitability of the completed distribution assembly.
Typical Applications
- Compact residential electrical distribution installations.
- Small surface-mounted consumer unit arrangements.
- Local electrical distribution points.
- Residential electrical refurbishment projects.
- Indoor utility room electrical installations.
- Electrical service areas within suitable buildings.
- Small distribution assemblies with limited modular equipment requirements.
- Wall-mounted electrical equipment housing.
- Domestic electrical installation upgrades.
- Selected commercial premises requiring compact distribution enclosures.
- Electrical contracting projects with surface-mounting requirements.
- Building alterations where recessed installation is impractical.
- Installations requiring a compact ABB enclosure format.
- Professional electrical distribution assembly work.
