Why Choose the ABB EPP-VSL128-2503P Protecta Plus Vertical Split Load Distribution Board?
The ABB EPP-VSL128-2503P is a 250 A three-pole vertical split load distribution board from the ABB Protecta Plus range, designed for metered commercial and industrial low-voltage power distribution. Identified by ABB order code 1TVS151800S2615, it provides a 12 + 8-way TPN split configuration with two separately metered distribution sections.
As part of the ABB Protecta Plus distribution board system, the EPP-VSL128-2503P is supplied as a coordinated vertical split load assembly. It includes a 250 A main isolator, two MID-approved meters with Modbus RS485 and pulse output, associated current transformers, incoming terminals and internal cables, helping simplify specification and installation.
With 12 + 8 outgoing TPN ways, two meters and dimensions of approximately 1440 × 450 × 125 mm, the EPP-VSL128-2503P provides a high-capacity solution for installations requiring separately monitored circuit groups. The 250 A isolator has a standard cable capacity of 95 mm², while outgoing protective devices can be selected separately to suit the requirements of the installation.
Key Advantages
- Genuine ABB Protecta Plus vertical split load distribution board.
- 250 A main isolator for high-capacity commercial and industrial distribution applications.
- 12 + 8-way TPN split configuration provides two organised outgoing circuit sections.
- Includes two MID-approved meters for electrical energy monitoring.
- Integrated Modbus RS485 and pulse output supports connection to compatible energy monitoring and building management systems.
- Supplied with associated CTs, incoming terminals and internal cables for a coordinated installation.
Key Features
- ABB Protecta Plus distribution board series.
- 250 A TPN main isolator.
- Three-pole incoming configuration.
- 12 + 8 outgoing TPN ways.
- 20 total outgoing ways across two sections.
- Two metered split sections.
- MID-approved meters with Modbus RS485 and pulse output.
- Associated current transformers (CTs) included.
- Incoming terminals and internal cables included.
- Meters supplied pre-configured to the internal CT sizing.
- 95 mm² standard cable capacity for the 250 A isolator.
Metered Split Load Power Distribution
Vertical split load distribution boards allow outgoing circuits to be separated and individually monitored within a single coordinated assembly. The ABB EPP-VSL128-2503P combines 12-way and 8-way TPN sections with two meters, making it suitable for applications where separate energy monitoring of different loads, departments, tenants or building services is required.
The integrated meters are MID approved and provide both Modbus RS485 communication and pulse output, allowing energy data to be incorporated into compatible monitoring and building management systems. ABB supplies the meters pre-configured to the internal CT sizing, with the associated CTs, incoming terminals and internal wiring included as part of the board assembly.
Typical Applications
- Commercial building electrical distribution.
- Metered landlord and tenant distribution systems.
- Retail, office and mixed-use developments.
- Industrial low-voltage distribution installations.
- Building energy monitoring and management systems.
- High-capacity applications requiring separately metered 12-way and 8-way TPN circuit groups.
