2CPX062397R9999 ABB ZB65P10 30 mm Plastic Mounting Spacer 10-Piece Pack
ABB ZB65P10 is a 30 mm plastic mounting spacer supplied in a pack of 10 with fixing screws, designed for raising or lowering equipment mounting rails within compatible electrical distribution boards and enclosure assemblies.
Why Choose the ABB ZB65P10 30 mm Spacer 10-Piece Pack?
The ABB ZB65P10 is a practical and reliable 30 mm plastic mounting spacer designed for adjusting the installation position of equipment mounting rails within electrical distribution boards, switchgear assemblies and control enclosures. Part of the ABB DESUJ Sub Distribution range, this accessory provides a convenient solution for raising or lowering mounting rails to achieve the required component installation depth.
Manufactured from durable plastic, the ZB65P10 is designed for use in electrical enclosure interior fitting systems. Its purpose-built construction enables installers and panel builders to adjust mounting rail positions, helping accommodate electrical devices with different installation depths and supporting organised distribution board layouts. The spacers are supplied with mounting screws included, simplifying installation and reducing the need for separately sourced fixing hardware.
With a 30 mm spacer length and nominal external dimensions of 30 × 15 × 11 mm, the ABB ZB65P10 provides a compact solution for mounting rail height and depth adjustment. Supplied as a pack of 10 spacers, it is suitable for professional electrical contractors, distribution board manufacturers and industrial panel builders requiring consistent mounting accessories for electrical installations.
Key Advantages
30 mm plastic spacer designed for adjusting equipment mounting rail positions.
Enables raising or lowering of mounting rails within compatible electrical distribution assemblies.
Pack of 10 spacers suitable for multiple mounting points and panel installations.
Mounting screws included for convenient installation.
Durable plastic construction provides a lightweight and practical mounting solution.
Compact design supports efficient use of available space inside electrical enclosures.
Helps accommodate electrical devices with different mounting depth requirements.
Supports organised component positioning within distribution boards and switchgear assemblies.
Part of the ABB DESUJ Sub Distribution accessory range.
Suitable for professional electrical panel construction, installation and refurbishment.
Key Features
ABB ZB65P10 mounting spacer for electrical distribution board assemblies.
30 mm nominal spacer length.
30 × 15 × 11 mm nominal external dimensions.
10-piece pack quantity.
Plastic construction for electrical enclosure interior fitting applications.
Designed for equipment mounting rail height and depth adjustment.
Allows mounting rails to be positioned higher or lower within compatible assemblies.
Fixing screws supplied with the spacer set.
Compact dimensions for integration into electrical distribution systems.
Suitable for use with compatible ABB interior fitting and mounting rail arrangements.
Designed for professional electrical panel assembly and maintenance.
Part of the ABB STRIEBEL & JOHN electrical distribution accessory portfolio.
Reliable Mounting Rail Positioning for Electrical Distribution Systems
Correct mounting rail positioning is essential when assembling electrical distribution boards and control panels. Electrical devices can have different installation depths, making it necessary to adjust the position of supporting rails to maintain suitable alignment with protective covers, front panels and surrounding components. The ABB ZB65P10 provides a practical solution by allowing compatible equipment mounting rails to be raised or lowered within the enclosure assembly.
The 30 mm plastic spacer is designed for integration into compatible ABB electrical distribution interior fitting systems. Its compact construction helps panel builders establish consistent mounting positions while making efficient use of available enclosure space. The included fixing screws simplify assembly and provide the necessary fastening hardware for the intended mounting arrangement.
As part of the ABB STRIEBEL & JOHN distribution accessory range, the ZB65P10 supports professional electrical panel construction and refurbishment. Supplied in packs of 10, it is particularly useful for projects requiring repeated mounting rail adjustments, consistent component positioning and reliable installation accessories. The suitability of the spacer for a particular mounting rail or enclosure configuration should be checked against the applicable ABB assembly instructions.
Typical Applications
Electrical distribution board mounting rail adjustments.
ABB STRIEBEL & JOHN interior fitting systems.
Low-voltage electrical distribution assemblies.
Raising or lowering equipment mounting rails inside electrical enclosures.
Industrial control panel construction and assembly.
Adjusting component mounting depth within distribution boards.
Commercial building electrical distribution installations.
Electrical panel upgrades and refurbishment projects.
OEM electrical enclosure and distribution equipment manufacturing.
Professional panel building requiring consistent mounting rail positioning.
Technical Specifications
Tick the specs you need, then view products that match.
Device Type
Accessory
Product Series
S&J CombiLine N
Product range
ABB STRIEBEL & JOHN Distribution Accessories
Product group
DESUJ Sub Distribution
ABB order code
2CPX062397R9999
Product type
Mounting spacer
Accessory category
Equipment mounting rail spacer
Nominal spacer length
30 mm
External width
30 mm
External height
15 mm
External depth
11 mm
External dimensions (W × H × D)
30 × 15 × 11 mm
Material
Plastic
Construction type
Interior fitting system accessory
Function
Raising or lowering equipment mounting rails
Mounting hardware
Fixing screws included
Pack quantity
10 pieces
Packaging unit
1 pack
Country of origin
Germany
Application
Electrical distribution boards, mounting rail assemblies and industrial control enclosures
Frequently Asked Questions
What is the ABB ZB65P10 used for?
The ABB ZB65P10 is a plastic mounting spacer designed for raising or lowering equipment mounting rails within compatible electrical distribution boards and enclosure interior fitting systems. It helps installers adjust rail positions to accommodate different component mounting requirements.
What size is the ABB ZB65P10 spacer?
The ZB65P10 has a 30 mm nominal spacer length and external dimensions of 30 × 15 × 11 mm. Its compact design makes it suitable for mounting rail positioning within compatible electrical distribution assemblies.
How many spacers are included in one ABB ZB65P10 pack?
The ABB ZB65P10 is supplied as a pack of 10 spacers, providing a convenient quantity for electrical panel assembly, mounting rail adjustments and multiple installation points.
Are mounting screws included with the ABB ZB65P10?
Yes. The ABB ZB65P10 spacer set includes mounting screws, allowing installers to fit the spacers to compatible equipment mounting rail arrangements without needing to source the specified fixing hardware separately.
What material is the ABB ZB65P10 manufactured from?
The ZB65P10 is manufactured from plastic and is designed for use as an interior fitting accessory within compatible electrical distribution board and enclosure mounting systems.
Can the ABB ZB65P10 be used to adjust DIN rail mounting depth?
The ZB65P10 is designed to raise or lower compatible equipment mounting rails, making it useful where mounting positions must be adjusted to accommodate electrical devices or panel assembly requirements. Compatibility with the specific DIN rail and mounting system should be confirmed before installation.
What is the difference between ABB ZB65P10 and ZB64P10 spacers?
Both products are mounting spacers supplied in packs of 10 for adjusting equipment rail positions. The ABB ZB65P10 has a 30 mm nominal spacer length, while the ABB ZB64P10 has a 25 mm nominal spacer length. The appropriate version depends on the mounting arrangement and required rail position.
Trusted by Electrical Panel Builders and Installation Professionals
ABB ZB65P10 mounting spacers provide a practical solution for adjusting equipment rail positions within professional electrical distribution assemblies. With durable plastic construction, a 30 mm nominal spacer length, included fixing screws and a convenient 10-piece pack, they support efficient panel assembly, consistent mounting arrangements and organised electrical enclosure installations.
Device Type
Accessory
Product Series
S&J CombiLine N
Product range
ABB STRIEBEL & JOHN Distribution Accessories
Product group
DESUJ Sub Distribution
ABB order code
2CPX062397R9999
Product type
Mounting spacer
Accessory category
Equipment mounting rail spacer
Nominal spacer length
30 mm
External width
30 mm
External height
15 mm
External depth
11 mm
External dimensions (W × H × D)
30 × 15 × 11 mm
Material
Plastic
Construction type
Interior fitting system accessory
Function
Raising or lowering equipment mounting rails
Mounting hardware
Fixing screws included
Pack quantity
10 pieces
Packaging unit
1 pack
Country of origin
Germany
Application
Electrical distribution boards, mounting rail assemblies and industrial control enclosures
No documents available for this product.
UK delivery
Delivery options
Free UK delivery on orders over £200 ex VAT. Order in-stock items before 2pm Monday to Friday for next-day delivery.
This productManufacturer Lead Time
Estimated Delivery 6 weeks
Standard delivery
£8 ex VAT · free over £200
UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Collect from our showroom
Mon–Fri, 8am–5pm
Order and pay online, then collect from our showroom.
Please allow 15–30 minutes after ordering for us to prepare your order.
Northern Ireland, ROI & export
Priced at checkout
We deliver to Northern Ireland, the Republic of Ireland and overseas.
Delivery is calculated at checkout based on your destination.
Orders with mixed availability
Shipped complete
If part of your order is on a lead time, we hold it and send everything together.
Need the in-stock items sooner? Ask us and we can split the delivery.
Business customer returns
Returns & order support
Need to return an item? Find the guidance for your order below, then contact our team before sending anything back.
Stocked items
Request within 30 days
Changed your mind or ordered the wrong item? Request a return within 30 days of receipt. There is no restocking charge.
Items must be unused, in resalable condition and in their original packaging, and returns need our approval first. Return carriage is at your cost, and the original delivery charge is not refunded.
Faulty or damaged items
Tell us as soon as possible
Faulty, damaged on delivery or the wrong product supplied? Contact our team as soon as possible with the details.
We will review the issue and arrange an appropriate resolution under our terms and conditions and your statutory rights.
Made-to-order items
Manufacturer approval needed
Manufactured, configured and special-order products can only be returned with the manufacturer’s approval. Any handling charge is agreed with you when you request the return.
This does not affect claims for faulty goods or items that do not meet the agreed specification.
Let’s get your return sorted.
Send your order number, product details and reason for return. For faults or delivery damage, include photographs if available. We will confirm the next steps.
The 30-day return request period applies to change-of-mind returns for stocked items. It does not limit your statutory rights for faulty or non-conforming goods.
● Service Agreements
Credit Accounts
Our service agreements are built to support long term procurement relationships. By working closely with engineering teams and procurement departments, we help streamline purchasing processes while ensuring consistent access to critical components and sourcing support when it matters most.
Priority sourcing and supply support
Flexible payment terms for qualifying organisations
Support for engineering, maintenance, and operations
500 +
Stock lines ready to ship
1,000 +
Same day dispatches
3500 +
Customers supported
28
Trusted Manfacturers
● frequently asked questions
Common questions about our products and support
At Led Controls Ltd we help engineers source the right automation and control gear with confidence. below are quick answers to what we are asked most often.
What product ranges do you supply
We supply all leading manfacturers in our industry. we offer next day delivery on most poplour products.
Can you help specify the correct part?
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
Do you have stock for urgent orders?
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
What are your delivery times and costs?
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
What about warranties, returns and faulty items?
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
LED Controls is a specialist distributor of factory automation and industrial controls, supplying OEMs, machine builders, panel builders and end users throughout the UK and worldwide. As a trusted UK distributor for many of the world’s leading automation manufacturers, we provide industrial control products, technical expertise and bespoke automation solutions backed by outstanding customer service.
2025 has been a big year for LED Controls, and our blog has expanded accordingly. We've covered a wide range of topics across industrial control and factory automation this year. From core technology explainers and new product releases to panel building best practice...
