2CPX062398R9999 ABB ZB67P10 40 mm Plastic Mounting Spacer 10-Piece Pack
ABB ZB67P10 is a 40 mm plastic mounting spacer supplied in a pack of 10 with fixing screws, designed for raised or recessed installation of equipment mounting rails within compatible electrical distribution boards and enclosure assemblies.
Why Choose the ABB ZB67P10 40 mm Spacer 10-Piece Pack?
The ABB ZB67P10 is a durable and practical 40 mm plastic mounting spacer designed for adjusting the installation position of equipment mounting rails within electrical distribution boards, switchgear assemblies and industrial control enclosures. Part of the ABB DESUJ Sub Distribution range, this accessory provides a convenient solution for raised or recessed mounting of equipment rails, helping electrical installers achieve the required component positioning within compatible enclosure systems.
Manufactured from plastic, the ZB67P10 is specifically designed for use in electrical distribution board interior fitting systems. Its purpose-built construction enables installers and panel builders to adjust equipment rail positions, helping accommodate electrical components with different installation depths. The spacers are supplied with fixing screws included, simplifying assembly and reducing the need for separately sourced mounting hardware.
With a 40 mm nominal spacer length and external dimensions of 40 × 15 × 11 mm, the ABB ZB67P10 provides a compact solution for mounting rail positioning and depth adjustment. Supplied as a pack of 10 spacers, it is suitable for professional electrical contractors, distribution board manufacturers and industrial panel builders requiring consistent mounting accessories for electrical installations.
Key Advantages
40 mm plastic spacer designed for adjusting equipment mounting rail positions.
Enables raised or recessed mounting of compatible equipment rails within electrical distribution assemblies.
Pack of 10 spacers suitable for multiple mounting points and panel installations.
Fixing screws included for convenient installation.
Durable plastic construction provides a lightweight and practical mounting solution.
Compact design supports efficient use of available space inside electrical enclosures.
Helps accommodate electrical devices with different mounting depth requirements.
Supports organised component positioning and consistent mounting arrangements.
Part of the ABB STRIEBEL & JOHN distribution accessory range.
Suitable for professional electrical panel construction, installation and refurbishment.
Key Features
ABB ZB67P10 mounting spacer from the DESUJ Sub Distribution product group.
40 mm nominal spacer length.
40 × 15 × 11 mm external dimensions.
10-piece pack quantity.
Plastic construction for electrical enclosure interior fitting applications.
Designed for equipment mounting rail height and depth adjustment.
Allows compatible mounting rails to be installed in raised or recessed positions.
Fixing screws supplied with the spacers.
Compact dimensions for integration into electrical distribution assemblies.
Suitable for compatible ABB equipment mounting rail arrangements.
Designed for professional electrical distribution board assembly and maintenance.
Part of the ABB STRIEBEL & JOHN electrical distribution accessory portfolio.
Reliable Mounting Rail Positioning for Electrical Distribution Systems
Correct mounting rail positioning is an important consideration when assembling electrical distribution boards and industrial control panels. Electrical devices may have different installation depths, requiring adjustments to their supporting rails to achieve suitable alignment with protective covers, front panels and surrounding components. The ABB ZB67P10 provides a practical solution by enabling compatible equipment mounting rails to be installed in raised or recessed positions within electrical enclosure assemblies.
The 40 mm plastic spacer is designed for integration into compatible ABB electrical distribution interior fitting systems. Its compact 40 × 15 × 11 mm construction helps panel builders establish consistent mounting arrangements while making efficient use of available enclosure space. The included fixing screws simplify installation and provide the specified fastening hardware for the intended mounting application.
As part of the ABB STRIEBEL & JOHN distribution accessory range, the ZB67P10 supports professional electrical panel construction, modification and refurbishment. Supplied in packs of 10, it is particularly useful for projects requiring repeated mounting rail adjustments and consistent component positioning. Installers should confirm compatibility with the intended equipment rail and enclosure system and follow the applicable ABB installation instructions.
Typical Applications
Electrical distribution board mounting rail adjustments.
ABB STRIEBEL & JOHN interior fitting systems.
Low-voltage electrical distribution assemblies.
Raised or recessed installation of equipment mounting rails.
Adjusting component mounting depth within distribution boards.
Commercial building electrical distribution installations.
Electrical enclosure upgrades and refurbishment projects.
OEM electrical equipment and distribution system manufacturing.
Professional panel building requiring consistent mounting rail positioning.
Technical Specifications
Tick the specs you need, then view products that match.
Device Type
Accessory
Product Series
S&J CombiLine N
Product range
ABB STRIEBEL & JOHN Distribution Accessories
Product group
DESUJ Sub Distribution
ABB order code
2CPX062398R9999
Product type
Mounting spacer
Accessory category
Equipment mounting rail spacer
Nominal spacer length
40 mm
External width
40 mm
External height
15 mm
External depth
11 mm
External dimensions (W × H × D)
40 × 15 × 11 mm
Material
Plastic
Construction type
Interior fitting system accessory
Function
Raised or recessed mounting of equipment rails
Mounting hardware
Fixing screws included
Pack quantity
10 pieces
Base packaging unit
Pack
EAN
4011617623984
Country of origin
Germany
Application
Electrical distribution boards, equipment mounting rail assemblies and industrial control enclosures
Frequently Asked Questions
What is the ABB ZB67P10 used for?
The ABB ZB67P10 is a plastic mounting spacer designed for raised or recessed installation of equipment mounting rails within compatible electrical distribution boards and enclosure interior fitting systems. It helps installers adjust mounting positions to accommodate different electrical component installation requirements.
What size is the ABB ZB67P10 spacer?
The ZB67P10 has a 40 mm nominal spacer length and external dimensions of 40 × 15 × 11 mm. Its compact construction makes it suitable for mounting rail positioning within compatible electrical distribution assemblies.
How many spacers are included in one ABB ZB67P10 pack?
The ABB ZB67P10 is supplied as a pack of 10 spacers, providing a convenient quantity for electrical panel assembly, mounting rail adjustments and installations requiring multiple mounting points.
Are mounting screws included with the ABB ZB67P10?
Yes. The ABB ZB67P10 includes fixing screws for installation with compatible equipment mounting rail arrangements, helping simplify assembly and reducing the need to obtain the specified mounting hardware separately.
What material is the ABB ZB67P10 manufactured from?
The ZB67P10 is manufactured from plastic and is designed for use as an interior fitting accessory within compatible electrical distribution board and enclosure mounting systems.
Can the ABB ZB67P10 be used to adjust DIN rail mounting depth?
Yes. The ZB67P10 is designed to enable raised or recessed mounting of compatible equipment rails, making it useful where installation positions must be adjusted to accommodate electrical devices or panel assembly requirements. Compatibility with the specific rail and enclosure system should be confirmed before installation.
What is the difference between ABB ZB67P10 and ZB65P10 spacers?
Both products are plastic mounting spacers supplied in packs of 10 with fixing screws. The ABB ZB67P10 has a 40 mm nominal spacer length, whereas the ABB ZB65P10 has a 30 mm nominal spacer length. The appropriate version depends on the required mounting position and the compatible electrical distribution assembly.
Trusted by Electrical Panel Builders and Installation Professionals
ABB ZB67P10 mounting spacers provide a practical and dependable solution for adjusting equipment rail positions within professional electrical distribution assemblies. With durable plastic construction, a 40 mm nominal spacer length, included fixing screws and a convenient 10-piece pack, they support efficient panel assembly, consistent mounting arrangements and organised electrical enclosure installations.
Device Type
Accessory
Product Series
S&J CombiLine N
Product range
ABB STRIEBEL & JOHN Distribution Accessories
Product group
DESUJ Sub Distribution
ABB order code
2CPX062398R9999
Product type
Mounting spacer
Accessory category
Equipment mounting rail spacer
Nominal spacer length
40 mm
External width
40 mm
External height
15 mm
External depth
11 mm
External dimensions (W × H × D)
40 × 15 × 11 mm
Material
Plastic
Construction type
Interior fitting system accessory
Function
Raised or recessed mounting of equipment rails
Mounting hardware
Fixing screws included
Pack quantity
10 pieces
Base packaging unit
Pack
EAN
4011617623984
Country of origin
Germany
Application
Electrical distribution boards, equipment mounting rail assemblies and industrial control enclosures
No documents available for this product.
UK delivery
Delivery options
Free UK delivery on orders over £200 ex VAT. Order in-stock items before 2pm Monday to Friday for next-day delivery.
This productManufacturer Lead Time
Estimated Delivery 6 weeks
Standard delivery
£8 ex VAT · free over £200
UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Collect from our showroom
Mon–Fri, 8am–5pm
Order and pay online, then collect from our showroom.
Please allow 15–30 minutes after ordering for us to prepare your order.
Northern Ireland, ROI & export
Priced at checkout
We deliver to Northern Ireland, the Republic of Ireland and overseas.
Delivery is calculated at checkout based on your destination.
Orders with mixed availability
Shipped complete
If part of your order is on a lead time, we hold it and send everything together.
Need the in-stock items sooner? Ask us and we can split the delivery.
Business customer returns
Returns & order support
Need to return an item? Find the guidance for your order below, then contact our team before sending anything back.
Stocked items
Request within 30 days
Changed your mind or ordered the wrong item? Request a return within 30 days of receipt. There is no restocking charge.
Items must be unused, in resalable condition and in their original packaging, and returns need our approval first. Return carriage is at your cost, and the original delivery charge is not refunded.
Faulty or damaged items
Tell us as soon as possible
Faulty, damaged on delivery or the wrong product supplied? Contact our team as soon as possible with the details.
We will review the issue and arrange an appropriate resolution under our terms and conditions and your statutory rights.
Made-to-order items
Manufacturer approval needed
Manufactured, configured and special-order products can only be returned with the manufacturer’s approval. Any handling charge is agreed with you when you request the return.
This does not affect claims for faulty goods or items that do not meet the agreed specification.
Let’s get your return sorted.
Send your order number, product details and reason for return. For faults or delivery damage, include photographs if available. We will confirm the next steps.
The 30-day return request period applies to change-of-mind returns for stocked items. It does not limit your statutory rights for faulty or non-conforming goods.
● Service Agreements
Credit Accounts
Our service agreements are built to support long term procurement relationships. By working closely with engineering teams and procurement departments, we help streamline purchasing processes while ensuring consistent access to critical components and sourcing support when it matters most.
Priority sourcing and supply support
Flexible payment terms for qualifying organisations
Support for engineering, maintenance, and operations
500 +
Stock lines ready to ship
1,000 +
Same day dispatches
3500 +
Customers supported
28
Trusted Manfacturers
● frequently asked questions
Common questions about our products and support
At Led Controls Ltd we help engineers source the right automation and control gear with confidence. below are quick answers to what we are asked most often.
What product ranges do you supply
We supply all leading manfacturers in our industry. we offer next day delivery on most poplour products.
Can you help specify the correct part?
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
Do you have stock for urgent orders?
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
What are your delivery times and costs?
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
What about warranties, returns and faulty items?
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
LED Controls is a specialist distributor of factory automation and industrial controls, supplying OEMs, machine builders, panel builders and end users throughout the UK and worldwide. As a trusted UK distributor for many of the world’s leading automation manufacturers, we provide industrial control products, technical expertise and bespoke automation solutions backed by outstanding customer service.
2025 has been a big year for LED Controls, and our blog has expanded accordingly. We've covered a wide range of topics across industrial control and factory automation this year. From core technology explainers and new product releases to panel building best practice...
