Why Choose the ABB ZX289P10 M8 Spring Washer?
The ABB ZX289P10 M8 Spring Washer, ABB order code 2CPX062535R9999, is an electrical installation fastening accessory intended for use with compatible M8 threaded fixing assemblies. Listed within ABB's DESUJ Sub Distribution product group, it is relevant to electrical distribution equipment, enclosure assembly and associated mechanical fastening applications.
An M8 spring washer is designed to work with a suitable M8 bolt, screw or stud and the corresponding nut or threaded fixing point. Spring washers provide a resilient element within a fastening assembly and may help maintain contact between components under appropriate installation conditions. Their effectiveness depends on the complete joint design, material selection, tightening method and operating environment.
The ABB ZX289P10 offers a manufacturer-identified replacement or installation component for projects requiring the specified washer reference. Using the correct ABB article number helps electrical contractors, panel builders and maintenance teams identify the intended accessory when sourcing parts for compatible distribution equipment.
For reliable installation, the washer should be used only where the relevant ABB assembly instructions or engineering specification call for this component. The exact washer material, surface finish, dimensions and any approved tightening requirements should be verified against the manufacturer's technical documentation.
Key Advantages
- M8 nominal size for compatible M8 threaded fastening assemblies.
- Spring washer design provides a resilient element within a suitable mechanical joint.
- ABB manufacturer identification supports accurate component selection.
- Specific ZX289P10 reference helps distinguish the washer from other fixing accessories.
- ABB order code 2CPX062535R9999 supports purchasing and stock identification.
- DESUJ Sub Distribution classification associates the product with electrical distribution accessories.
- Suitable for specified electrical equipment assemblies where an M8 spring washer is required.
- Useful for panel assembly and maintenance when confirmed as the correct replacement component.
- Compact fastening accessory for integration into compatible bolted joints.
- Supports consistent component identification in maintenance schedules and parts lists.
- Can be paired with suitable M8 fixings according to the approved assembly design.
- Manufacturer-specific part reference reduces ambiguity when ordering.
Key Features
- Manufacturer: ABB.
- Product reference: ZX289P10.
- ABB order code: 2CPX062535R9999.
- Product description: ZX289P10 M8 Spring Washer.
- Product type: Spring washer.
- Nominal fastening size: M8.
- Accessory category: Mechanical fastening component.
- ABB product group: DESUJ Sub Distribution.
- Primary function: Resilient washer element for a compatible bolted joint.
- Installation method: Incorporated into a suitable M8 fastening assembly.
- Application area: Electrical distribution equipment and associated assemblies, subject to compatibility.
- Thread compatibility: M8 fixing assemblies.
- Material: To be confirmed from ABB technical documentation.
- Surface finish: To be confirmed from ABB technical documentation.
- Washer profile: Refer to the manufacturer's drawing.
- Dimensional tolerances: Refer to the manufacturer's specification.
- Approved tightening torque: Determined by the complete fastening assembly.
- Pack quantity: Confirm from the ABB sales unit and packaging information.
Technical Specifications
- Brand: ABB
- Manufacturer product reference: ZX289P10
- ABB order code: 2CPX062535R9999
- Manufacturer description: ZX289P10 M8 Spring Washer
- ABB product group: DESUJ Sub Distribution
- Product category: Electrical installation fastening accessories
- Accessory type: Spring washer
- Nominal size: M8
- Compatible fastening designation: M8
- Primary application: Compatible mechanical fixing assemblies
- Intended installation context: ABB sub-distribution equipment where specified
- Fastening function: Resilient element within a bolted joint
- Material composition: Not confirmed in the supplied specification
- Material grade: Refer to ABB technical documentation
- Surface coating: Not confirmed in the supplied specification
- Corrosion resistance: Verify for the intended environment
- Washer outside diameter: Refer to the ABB dimensional drawing
- Washer inside diameter: Refer to the ABB dimensional drawing
- Washer thickness: Refer to the ABB dimensional drawing
- Spring washer profile: Refer to the ABB product drawing
- Applicable dimensional standard: Confirm with ABB
- Required tightening torque: Dependent on the specified joint assembly
- Suitable bolt or screw: Compatible M8 fastening hardware
- Suitable nut: Compatible M8 nut where required
- Electrical conductivity: Not specified
- Electrical bonding approval: Not established by the supplied specification
- Operating temperature range: Not confirmed
- Product weight: Not confirmed
- Sales pack quantity: Not confirmed
- EAN / GTIN: Not confirmed
- Manufacturer compatibility: Verify against the relevant ABB equipment documentation
M8 Spring Washer for Electrical Distribution Fastening Assemblies
The ABB ZX289P10 M8 Spring Washer is intended for fastening applications where an M8 spring washer is specified. In electrical distribution equipment, mechanical fixings can be used to secure mounting brackets, structural components, enclosure fittings and other assemblies. The correct washer must be selected as part of the complete fastening arrangement.
A spring washer provides a degree of resilience when compressed within an appropriately designed bolted joint. However, a spring washer alone does not guarantee resistance to vibration-induced loosening. Joint performance depends on factors including preload, washer design, fastener grade, surface condition and the forces acting on the assembly.
The M8 designation identifies the nominal metric fastening size. It does not, by itself, establish the washer's exact internal diameter, external diameter, thickness, spring characteristics or material grade. These properties should be checked against ABB's product documentation when dimensional fit or mechanical performance is critical.
For electrical distribution equipment, it is also important to distinguish mechanical fastening from electrical bonding. The presence of a metal washer does not automatically establish an approved protective earth connection or electrical contact path. Where electrical continuity is required, the complete assembly must follow the manufacturer's approved bonding instructions.
The product's ABB ZX289P10 reference and 2CPX062535R9999 order code provide clear identification for maintenance and procurement. These identifiers should be matched against the relevant equipment parts list before installation, particularly when replacing an existing washer or servicing an ABB sub-distribution assembly.
Typical Applications
- Compatible ABB sub-distribution equipment assemblies.
- M8 mechanical fastening arrangements.
- Electrical distribution enclosure assembly.
- Mounting bracket fixings where specified.
- Electrical panel mechanical installation.
- Switchboard structural fastening applications.
- Replacement of a matching ABB ZX289P10 washer.
- Industrial electrical equipment maintenance.
- OEM electrical assembly production.
- Electrical installation accessory stockholding.
- Mechanical fixings requiring a specified M8 spring washer.
- Maintenance and refurbishment of compatible ABB distribution equipment.
