Why Choose the Pizzato ST GD210M2-E0T Safety Sensor?
The Pizzato ST GD210M2-E0T is a compact RFID non-contact safety sensor with actuator designed for reliable monitoring of movable guards, doors and access points on industrial machinery. Part of the Pizzato ST G series, it combines digitally coded RFID technology with electronic safety outputs to provide dependable guard-position detection without mechanical contact between the sensor and actuator.
The ST G series uses a compact, symmetrical glass-fibre reinforced technopolymer housing with a standard 22 mm mounting-hole spacing. This allows flexible mounting in either orientation and makes the series particularly suitable for upgrading machinery from traditional magnetic sensors to RFID safety technology. A multicolour RGB status LED visible from both sides provides clear operating and diagnostic information.
The ST GD210M2-E0T operates from a 24 V DC supply and provides two OSSD PNP safety outputs together with an auxiliary signalling output. This configuration is paired with the SM E0T low-level coded large RFID actuator, which provides an increased nominal actuation distance of approximately 18 mm and frontal fixing for applications requiring greater sensor-to-actuator separation.
Key Advantages
- Compact RFID safety sensor designed for industrial guard monitoring.
- Non-contact operation eliminates mechanical wear between the sensor and actuator.
- Two OSSD PNP safety outputs for integration with safety controllers and PLCs.
- SM E0T large RFID actuator with low-level coding and frontal fixing.
- Increased actuator operating distance of approximately 18 mm.
- Symmetrical housing enables flexible mounting on left- or right-hand guards.
- Standard 22 mm fixing centres simplify machinery upgrades.
- IP67 and IP69K protection supports use in demanding industrial environments.
Key Features
- Pizzato ST G series RFID safety sensor.
- 24 V DC operating supply.
- 2 OSSD PNP electronic safety outputs.
- 1 auxiliary signalling output.
- Digitally coded RFID actuator recognition.
- SM E0T low-level coded actuator.
- Approximate 18 mm actuator operating distance.
- Large actuator with frontal fixing.
- Compact 37 × 26 × 18 mm sensor housing.
- 22 mm mounting-hole spacing.
- Multicolour RGB signalling LED visible from both sides.
- IP67 and IP69K environmental protection.
Reliable RFID Guard Monitoring for Industrial Automation
RFID safety sensors such as the Pizzato ST GD210M2-E0T monitor machine guards without requiring physical contact between the sensor and actuator. When the coded actuator enters the sensor's operating zone, its identity is detected electronically and the safety outputs communicate the guard status to the connected safety control system.
The ST G series combines RFID detection with a compact symmetrical housing, electronic OSSD outputs and high environmental protection. The SM E0T large actuator provides a greater operating distance than the standard and miniaturised ST actuators, making this configuration particularly useful where guard alignment, tolerances or installation geometry require additional sensing range.
Typical Applications
- Industrial machine guard doors and access panels.
- Automated production and assembly machinery.
- Packaging and processing equipment.
- Robot cells and automated manufacturing systems.
- Food and pharmaceutical processing machinery.
- Guards requiring increased sensor-to-actuator operating distance.
