ABB JSHD2C Type F 2TLA020001R1400 is an IP54 three-position safety enabling pushbutton with gold-plated 1 NO + 1 NC contacts, a 24 V DC nominal voltage and three 1250 mm connection leads.
£67.83
The ABB JSHD2C Type F is a compact and reliable three-position safety enabling pushbutton designed for industrial machine safety and operator-control applications. As part of the ABB Jokab Safety JSHD2C range, it provides three distinct actuator positions for applications where deliberate operator action is required while machinery is being set up, adjusted, tested or serviced.
The JSHD2C Type F incorporates gold-plated contacts suitable for low-level signal circuits and provides one normally open and one normally closed contact. Its three-position operating principle allows an appropriately designed control system to distinguish between released, deliberately enabled and fully depressed states, providing dependable operator input for machine safety applications.
This Type F version is supplied with three 1250 mm leads and provides IP54 protection. With a nominal voltage of 24 V DC, a maximum rated voltage/current of 30 V DC / 20 mA and a mechanical service life exceeding one million operations between the top and middle positions, it provides a durable solution for industrial enabling devices and machine controls.
Three-position enabling switches are used in machine safety applications where an operator must deliberately maintain a control in its enabled position during activities such as setup, adjustment or fault finding. The ABB JSHD2C Type F provides separate switching states as the actuator moves through its three positions, allowing an appropriately designed safety control system to monitor operator input and respond when the actuator is released or fully depressed.
The Type F configuration combines gold-plated contacts with three extended 1250 mm leads, making it particularly suitable for low-level signal circuits requiring additional connection length. Its compact reinforced housing, IP54 protection and defined mechanical operating life make it suitable for incorporation into industrial enabling devices and machine control equipment.
| Manufacturer | ABB |
|---|---|
| Product range | ABB Jokab Safety |
| Series | JSHD2C |
| Model | JSHD2C Type F |
| Manufacturer part number | 2TLA020001R1400 |
| Product type | Three-position safety enabling pushbutton |
| Number of positions | 3 |
| Contact configuration | 1 NO + 1 NC |
| Contact material | Gold-plated (Au) |
| Nominal voltage | 24 V DC ±10% |
| Maximum rated voltage / current | 30 V DC / 20 mA |
| Minimum rated voltage / current | 10 V DC / 8 mA |
| Rated operational current DC-12 | 0.02 A at 24 V DC |
| Connection configuration | 3 leads, 1250 mm each |
| Lead conductor section | 0.22 mm², AWG 24 |
| Actuation force, top to middle | 1.8 N |
| Actuation force, middle to bottom | 20 N |
| Actuator stroke, top to middle | 2.5 mm nominal |
| Actuator stroke, top to bottom | 4.9 mm nominal |
| Mechanical service life, top to middle | >1,000,000 cycles |
| Mechanical service life, middle to bottom | >100,000 cycles |
| Protection rating | IP54 |
| Housing material | POM 20% glass-fibre reinforced |
| Housing colour | Yellow |
| Plunger material | PBT |
| Plunger colour | Black |
| Operating temperature | -10 to +55 °C |
| Storage temperature | -40 to +85 °C |
| Product net height | 29.25 mm |
| Product net width | 26.55 mm |
| Product net depth | 13.5 mm |
| Product net weight | 0.01 kg |
| EAN | 7350024456868 |
| HS Code | 85365080 |
| Country of Manufacture | Sweden |
The JSHD2C Type F is a three-position enabling pushbutton designed for industrial safety and control applications where deliberate operator action is required during machine setup, adjustment, testing or maintenance.
The ABB manufacturer part number is 2TLA020001R1400.
The JSHD2C Type F provides one normally open and one normally closed contact and uses gold-plated contacts suitable for low-level signal circuits.
The Type F version is supplied with three electrical leads, each 1250 mm long, providing additional connection length for integration into an enabling device or machine control system.
The JSHD2C Type F has a nominal voltage of 24 V DC ±10%, with a maximum rated voltage/current of 30 V DC / 20 mA and a rated operational current of 0.02 A at 24 V DC for DC-12 applications.
The mechanical service life is greater than 1 million cycles from the top to middle position and greater than 100,000 cycles from the middle to bottom position.
ABB Jokab Safety JSHD2C enabling switches provide machine builders, automation engineers and safety-system designers with compact three-position operator controls for dependable integration into industrial machinery and safety applications.
● Service Agreements
Credit Accounts
Our service agreements are built to support long term procurement relationships. By working closely with engineering teams and procurement departments, we help streamline purchasing processes while ensuring consistent access to critical components and sourcing support when it matters most.
● frequently asked questions
At Led Controls Ltd we help engineers source the right automation and control gear with confidence. below are quick answers to what we are asked most often.
We supply all leading manfacturers in our industry. we offer next day delivery on most poplour products.
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
● latest blog
LED Controls is a specialist distributor of factory automation and industrial controls, supplying OEMs, machine builders, panel builders and end users throughout the UK and worldwide. As a trusted UK distributor for many of the world’s leading automation manufacturers, we provide industrial control products, technical expertise and bespoke automation solutions backed by outstanding customer service.
2025 has been a big year for LED Controls, and our blog has expanded accordingly. We've covered a wide range of topics across industrial control and factory automation this year. From core technology explainers and new product releases to panel building best practice...
2025 has been a big year for LED Controls, and our blog has expanded accordingly. We've covered a wide range of topics across industrial control and factory automation this year. From core technology explainers and new product releases to panel building best practice...