ABB JSHD4-2-AH 2TLA019995R0800 is an IP65 three-position enabling device with LED indication, front and top auxiliary push buttons, a cable gland and an internal PCB with 10 screw connections for controlled machine operation during troubleshooting, programming and commissioning.
£502.56
The ABB JSHD4-2-AH 2TLA019995R0800 is an ergonomic three-position enabling device designed for controlled machine operation when an operator must work inside or close to a hazardous area. Part of the ABB Jokab Safety JSHD4 range, it is particularly suited to troubleshooting, test running, programming, commissioning and other machine-intervention tasks where limited movement needs to remain possible under deliberate operator control.
The JSHD4-2-AH combines the three-position enabling mechanism with integrated LED indication, a front push button and a top push button. Its AH bottom section incorporates a cable gland and PCB with 10 screw connections, providing flexible hard-wired integration into the machine control and safety system without requiring a fixed factory-fitted cable.
The enabling mechanism permits operation only while deliberately held in its middle position. Releasing the actuator or squeezing it fully removes the enabling condition, providing intuitive protection during machine intervention. With an IP65 enclosure, industrial-grade construction and a compact handheld format, the JSHD4-2-AH provides a practical solution for machinery requiring operator-controlled enabling together with auxiliary control functions.
The ABB JSHD4-2-AH uses a three-position enabling principle designed to allow limited machine movement while an operator is inside or close to a hazardous area. In the released position the enabling condition is absent. Deliberately pressing the actuator to its middle position permits the associated safety system to enable controlled machine functions, while pressing the actuator fully removes the enabling condition again.
The JSHD4-2 top section adds LED indication plus front and top push buttons, allowing auxiliary functions to be incorporated into the handheld control according to the machine design. The AH bottom section provides a cable gland and an internal PCB with 10 screw connections, making this version particularly suitable where the installer requires flexible hard-wired cabling rather than an M12 connector. Unlike the JSHD4-2-AH-A variant, the 2TLA019995R0800 version does not incorporate the additional anti-tamper PCB.
| Manufacturer | ABB |
|---|---|
| Product family | ABB Jokab Safety |
| Series | JSHD4 |
| Model | JSHD4-2-AH |
| Manufacturer part number | 2TLA019995R0800 |
| Product type | Three-position enabling device |
| Product name | Safety Control Enabling Device |
| Application | Controlled machine enabling / hold-to-run operation |
| Operating principle | Three position |
| Operating positions | Released / enabled middle position / fully depressed |
| Enabling channels | Dual channel |
| Three-position contact maximum voltage | 30 V DC |
| Three-position contact maximum current | 20 mA |
| Auxiliary controls | Front push button and top push button |
| Status indication | Integrated LEDs |
| Electrical interface | Contacts |
| Bottom section | AH |
| Cable entry | Cable gland |
| Connection system | Internal PCB with screw terminals |
| Number of screw connections | 10 |
| Anti-tamper PCB | No |
| Degree of protection | IP65 |
| Ambient operating temperature | -10 to +50 °C |
| Handle material | Polyamide / Noryl |
| Rubber material | NBR |
| Product net width | 34 mm |
| Product net height | 167 mm |
| Product net depth | 50 mm |
| Product net weight | Approximately 0.314 kg |
| EAN | 7350024453423 |
| HS Code | 85365019 |
| Country of Manufacture | Sweden |
The ABB JSHD4-2-AH is a three-position enabling device designed to permit limited controlled machine movement while an operator is in or near a hazardous area, such as during troubleshooting, programming, test running, setup or commissioning.
The enabling condition is inactive when the actuator is released, active while it is deliberately held in the middle position and inactive again when the actuator is fully depressed. This means either releasing or fully squeezing the device removes the enabling signal.
Yes. The JSHD4-2 top section incorporates both a front push button and a top push button for auxiliary machine-control functions.
Yes. The JSHD4-2-AH incorporates LED indication in its top section, allowing visual status information to be provided to the operator.
The AH bottom section uses a cable gland and an internal PCB with 10 screw connections, allowing suitable customer-selected cabling to be wired directly into the enabling device.
The JSHD4-2-AH 2TLA019995R0800 has the cable gland, 10 screw connections, LEDs and two auxiliary buttons but does not include the additional anti-tamper PCB. The JSHD4-2-AH-A 2TLA019995R0900 adds the anti-tamper PCB.
The JSHD4-2-AH has an IP65 degree of protection, providing protection against dust ingress and water jets when correctly installed.
The ABB JSHD4 family is specified for an ambient operating temperature range of -10 to +50 °C.
The JSHD4-2-AH measures approximately 167 × 34 × 50 mm (H × W × D) and has a net weight of approximately 0.314 kg.
The EAN for the ABB JSHD4-2-AH 2TLA019995R0800 is 7350024453423.
ABB Jokab Safety JSHD4 enabling devices provide ergonomic three-position operator control for troubleshooting, programming and machine intervention, with the JSHD4-2-AH combining LED indication, front and top auxiliary buttons, IP65 protection and a cable-gland connection with 10 screw terminals.
● Service Agreements
Credit Accounts
Our service agreements are built to support long term procurement relationships. By working closely with engineering teams and procurement departments, we help streamline purchasing processes while ensuring consistent access to critical components and sourcing support when it matters most.
● frequently asked questions
At Led Controls Ltd we help engineers source the right automation and control gear with confidence. below are quick answers to what we are asked most often.
We supply all leading manfacturers in our industry. we offer next day delivery on most poplour products.
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
● latest blog
LED Controls is a specialist distributor of factory automation and industrial controls, supplying OEMs, machine builders, panel builders and end users throughout the UK and worldwide. As a trusted UK distributor for many of the world’s leading automation manufacturers, we provide industrial control products, technical expertise and bespoke automation solutions backed by outstanding customer service.
2025 has been a big year for LED Controls, and our blog has expanded accordingly. We've covered a wide range of topics across industrial control and factory automation this year. From core technology explainers and new product releases to panel building best practice...
2025 has been a big year for LED Controls, and our blog has expanded accordingly. We've covered a wide range of topics across industrial control and factory automation this year. From core technology explainers and new product releases to panel building best practice...