Why Choose the Lovato P1RD4P25AC030 Residual Current Device?
The Lovato P1RD4P25AC030 is a dependable four-pole residual current device (RCD/RCCB) designed to provide effective earth leakage protection and improve electrical safety in industrial, commercial and low-voltage electrical installations. Part of the Lovato P1RD residual current protection series, it combines reliable residual current monitoring with compact DIN rail installation for modern distribution systems.
This residual current device detects leakage currents caused by insulation faults or unwanted current paths to earth and disconnects the circuit when the residual current exceeds the defined threshold. The Type AC characteristic provides protection against sinusoidal alternating residual currents commonly generated by standard AC electrical loads.
With a rated current of 25 A, a 30 mA residual current sensitivity and a four-pole configuration, the Lovato P1RD4P25AC030 is suitable for protecting three-phase circuits with neutral in electrical distribution boards, industrial panels and automation systems.
Key Advantages
- Reliable residual current protection for low-voltage electrical systems.
- 25 A rated current suitable for dedicated electrical circuits.
- 30 mA earth leakage sensitivity for enhanced electrical safety.
- Type AC residual current detection for standard alternating leakage currents.
- Four-pole switching for complete three-phase and neutral isolation.
- Compact DIN rail mounting design for efficient panel installation.
Key Features
- Lovato P1RD residual current device series.
- 4-pole configuration.
- 25 A rated current.
- 30 mA residual current sensitivity.
- Type AC characteristic.
- Provides protection against earth leakage currents.
- Manual test button for device verification.
- Compact modular design for electrical distribution boards.
- 35 mm DIN rail mounting format.
Reliable Residual Current Protection for Electrical Systems
Residual current devices such as the Lovato P1RD4P25AC030 monitor electrical circuits for leakage currents and disconnect the supply when abnormal current paths to earth are detected. This helps improve electrical safety and protects installations from earth fault conditions.
The P1RD series is designed for electrical installers, panel builders and automation professionals requiring compact and dependable residual current protection solutions that integrate easily into DIN rail mounted distribution systems.
Typical Applications
- Industrial electrical distribution boards.
- Three-phase control panels and automation systems.
- Commercial building installations.
- Machinery and equipment protection circuits.
- Low-voltage power distribution systems.
- Electrical installations requiring earth leakage protection.
