COL95-10/RA Partex right-angle copper tube terminal, 95mm², M10 stud, pack 50

Why Choose the Partex COL95-10/RA 95mm² Right-Angle Copper Tube Terminal?

The Partex COL95-10/RA is a heavy-duty 95 mm² right-angle copper tube ring terminal designed to provide secure and reliable electrical connections between large copper conductors and equipment fitted with M10 stud terminals. Featuring a 90° angled mounting palm, this uninsulated cable lug is particularly suitable for industrial electrical installations where restricted space, cable routing requirements or equipment configuration make conventional straight cable terminals less practical.

As part of the Partex COL right-angle copper tube terminal range, the COL95-10/RA combines robust copper construction with a protective tin-plated finish to support efficient electrical conductivity and resistance to oxidation. Its heavy-duty tubular barrel is designed for permanent compression crimp termination using suitable tooling, while the angled ring-shaped mounting palm enables secure attachment to compatible bolted electrical connections.

Designed for 95 mm² copper cables and an M10 mounting stud, the COL95-10/RA provides a practical solution for industrial switchgear, power distribution systems, electrical control panels and heavy-duty machinery. Its right-angle configuration helps installers route larger conductors more effectively, reducing the need for tight cable bends close to the connection point. Supplied in a convenient pack of 50 terminals, it is suitable for electrical contractors, panel builders, OEM manufacturers and industrial maintenance engineers.

Key Advantages

• Heavy-duty 95 mm² right-angle copper tube terminal for professional electrical cable termination.
• 90° angled mounting palm helps simplify cable routing in confined electrical installations.
• M10 stud connection provides secure attachment to compatible bolted electrical terminals.
• High-conductivity copper construction supports efficient electrical current transfer.
• Tin-plated finish helps protect the terminal against oxidation and corrosion.
• Robust tubular crimp barrel provides dependable mechanical retention when correctly installed.
• Closed ring-shaped mounting palm remains captured around the fixing until the nut or bolt is removed.
• Angled configuration helps reduce excessive conductor bending near the termination point.
• Suitable for industrial switchgear, power distribution equipment and heavy-duty electrical machinery.
• Supplied in a pack of 50 for efficient purchasing and professional electrical installation work.

Key Features

• Partex COL95-10/RA right-angle copper tube terminal.
• 95 mm² nominal conductor cross-sectional area.
• M10 stud fixing for compatible bolted electrical connections.
• 90° right-angle terminal configuration.
• High-conductivity copper tube construction.
• Protective tin-plated surface finish.
• Flat ring-shaped mounting palm with stud fixing hole.
• Heavy-duty tubular barrel for compression crimp termination.
• Designed for permanent electrical connections using appropriate crimping tooling.
• Suitable for compatible copper conductors.
• Uninsulated construction for application-specific insulation requirements.
• Suitable for industrial electrical distribution, switchgear and machinery connections.
• Pack quantity: 50 terminals.

Reliable Right-Angle Cable Terminations for Industrial Power Distribution

Right-angle copper tube terminals such as the Partex COL95-10/RA provide a practical method of connecting large copper conductors to bolted terminals, busbars and industrial power equipment where a straight cable lug may not provide sufficient installation clearance. The angled mounting palm changes the direction of the bolted connection relative to the cable barrel, allowing more flexible conductor routing inside electrical enclosures.

The heavy-duty tubular barrel accepts a correctly prepared 95 mm² copper conductor, which is secured using an appropriately sized compression crimping tool and die. When properly installed, the crimped joint provides dependable electrical contact and mechanical retention. The M10 ring-shaped mounting palm is then fastened to a compatible stud or bolted electrical connection point.

The 90° terminal configuration is particularly useful in industrial switchgear, power distribution assemblies and machinery where large cables must be routed around adjacent components or connected within restricted spaces. By allowing the conductor to approach the mounting point at an angle, the COL95-10/RA can help reduce excessive bending close to the termination and support more organised cable management.

For correct installation, the terminal should be crimped using suitable tooling and secured using the tightening torque specified by the equipment manufacturer. As the COL95-10/RA is uninsulated, appropriately rated heat-shrink sleeving, insulating boots or protective barriers should be applied where required. The completed connection must be suitable for the circuit current, operating voltage, conductor construction, mechanical loading and environmental conditions. The electrical and mechanical suitability of the M10 fixing must also be verified for the intended application.

Typical Applications

• Industrial electrical control panels and switchgear assemblies.
• Power distribution boards and electrical distribution equipment.
• Busbar connections and compatible bolted power terminals.
• Electrical installations with restricted cable termination clearance.
• Industrial machinery and heavy-duty electrical equipment.
• Motor control centres and associated power connections.
• OEM electrical equipment manufacturing and panel building.
• Large copper power cable terminations requiring a right-angle connection.
• Electrical maintenance, cable replacement and equipment refurbishment.
• Electrical systems requiring secure 95 mm² copper cable connections to appropriately rated M10 studs.