TE Connectivity M6/8.ST1.V2.IP20 1SNA115971R1000 is a 6 mm² sliding-link test disconnect terminal block with two integrated 4 mm IP20 test sockets, rated at 40 A and 630 V IEC for current transformer and industrial measurement circuits.
£8.75
The TE Connectivity M6/8.ST1.V2.IP20 1SNA115971R1000 is a robust 6 mm² sliding-link test disconnect terminal block with two integrated 4 mm IP20 test sockets, designed particularly for current transformer circuits, measurement systems and industrial control panels. As part of the established TE Connectivity ENTRELEC SNA series, it combines secure screw-clamp conductor termination, circuit isolation and accessible test points within a compact DIN rail-mounted assembly.
The terminal incorporates a screwdriver-operated sliding link that allows the main circuit to be disconnected for testing and maintenance without removing the connected conductors. Two built-in test sockets provide convenient and secure access for compatible 4 mm IP20 test plugs, making electrical measurements easier while helping maintain finger-safe protection around the test connection.
With an IEC rated voltage of 630 V, IEC rated current of 40 A and rated conductor cross-section of 6 mm², the M6/8.ST1.V2.IP20 provides dependable performance for demanding measurement and signal circuits. Its 8 mm spacing, compatibility with G32 and TH35 DIN rails and support for PCS sliding short-circuiting bridges make it particularly suitable for organised current transformer secondary wiring.
Test disconnect terminal blocks such as the TE Connectivity M6/8.ST1.V2.IP20 are particularly useful in current transformer secondary circuits, where safe measurement, isolation and short-circuiting procedures are important during commissioning and maintenance. The screwdriver-operated sliding link provides a controlled method of disconnecting the circuit while leaving the field conductors securely terminated.
The two integrated 4 mm IP20 test sockets allow compatible measuring equipment to be connected directly to the terminal block, while PCS sliding short-circuiting bridges can be used for convenient short-circuit operations across groups of terminals. This combination makes the M6/8.ST1.V2.IP20 a practical solution for metering, protection, switchgear and industrial electrical measurement installations.
| Manufacturer | TE Connectivity / ENTRELEC |
|---|---|
| Series | ENTRELEC SNA |
| Model | M6/8.ST1.V2.IP20 / M6/8.ST1.IP20 |
| Part number | 1SNA115971R1000 |
| Alias number | 011597110 |
| Product type | Screw clamp test disconnect terminal block |
| Block function | Disconnect / test |
| Disconnect type | Sliding link |
| Test connection | 2 built-in test sockets |
| Test plug compatibility | 4 mm IP20 test plugs |
| Number of circuits | 1 |
| Number of poles | 2 |
| Number of positions | 2 |
| Number of levels | 1 |
| Gauge type | A5 |
| IEC rated voltage | 630 V |
| IEC rated current | 40 A |
| UL rated current | 30 A |
| CSA rated current | 30 A |
| CSA rated voltage | 150 V |
| Maximum UL / CSA main-circuit operating voltage | 150 V |
| IEC impulse withstand voltage | 8000 V |
| Dielectric withstand voltage | 1890 V |
| Short-time withstand current at 1 s | 720 A |
| Rated conductor cross-section | 6 mm² |
| Flexible conductor capacity | 0.5–6 mm² |
| Rigid stranded conductor capacity | 0.5–10 mm² |
| Wire size | up to 8 AWG |
| Termination method | Screw terminal |
| Tightening torque | 0.8 Nm |
| Wire stripping length | 13 mm |
| Recommended tool size | 3.5 mm |
| Product width / spacing | 8 mm |
| Product height | 77 mm |
| Product depth | 41 mm |
| Weight | approx. 40 g |
| Housing material | Polyamide 6.6 |
| Colour | Grey |
| Protection rating | IP20 |
| Flammability rating | UL 94V-0 |
| Operating temperature | -55 to +110 °C |
| Installation temperature | -5 to +40 °C |
| Mounting type | DIN rail |
| DIN rail compatibility | G32 / TH35-7.5 / TH35-15 |
| Circuit application | Signal / current transformer measurement |
The M6/8.ST1.V2.IP20 is a test disconnect terminal block designed particularly for current transformer circuits and other industrial measurement applications requiring convenient testing, circuit isolation and secure screw-clamp connections.
Yes. The terminal incorporates two built-in test sockets compatible with 4 mm IP20 test plugs, allowing convenient connection of suitable electrical measurement equipment.
The terminal block has an IEC rated current of 40 A, an IEC rated voltage of 630 V and an impulse withstand voltage rating of 8000 V.
The screw terminals accept flexible conductors from 0.5–6 mm² and rigid stranded conductors from 0.5–10 mm², with a rated conductor cross-section of 6 mm².
The terminal block can be mounted on G32, TH35-7.5 and TH35-15 DIN rail profiles, making it suitable for a wide range of industrial electrical panels and switchgear assemblies.
TE Connectivity ENTRELEC SNA test disconnect terminal blocks provide secure circuit termination, convenient electrical measurement and controlled isolation for current transformer, metering, switchgear and industrial control applications.
● Service Agreements
Credit Accounts
Our service agreements are built to support long term procurement relationships. By working closely with engineering teams and procurement departments, we help streamline purchasing processes while ensuring consistent access to critical components and sourcing support when it matters most.
● frequently asked questions
At Led Controls Ltd we help engineers source the right automation and control gear with confidence. below are quick answers to what we are asked most often.
We supply all leading manfacturers in our industry. we offer next day delivery on most poplour products.
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
● latest blog
LED Controls is a specialist distributor of factory automation and industrial controls, supplying OEMs, machine builders, panel builders and end users throughout the UK and worldwide. As a trusted UK distributor for many of the world’s leading automation manufacturers, we provide industrial control products, technical expertise and bespoke automation solutions backed by outstanding customer service.
2025 has been a big year for LED Controls, and our blog has expanded accordingly. We've covered a wide range of topics across industrial control and factory automation this year. From core technology explainers and new product releases to panel building best practice...
2025 has been a big year for LED Controls, and our blog has expanded accordingly. We've covered a wide range of topics across industrial control and factory automation this year. From core technology explainers and new product releases to panel building best practice...